780 x 1180mm centre-pivot roof window with flashing and blind set in generic 300mm roof.

This Revit family is now superseded.

Please visit www.velux.co.uk for latest BIM information

Product Version: Revit Architecture 2008

6835 Downloads

780 x 1400mm centre-pivot roof window with flashing and blind set in generic 300mm roof.

This Revit family is now superseded.

Please visit www.velux.co.uk for latest BIM information

Product Version: Revit Architecture 2008

7264 Downloads

940 x 1600mm centre-pivot roof window with flashing and blind set in generic 300mm roof.

This Revit family is now superseded.

Please visit www.velux.co.uk for latest BIM information

No Rating

Product Version: Revit Architecture 2008

9297 Downloads

1140 x 1180mm centre-pivot roof window with flashing and blind set in generic 300mm roof.

This Revit family is now superseded.

Please visit www.velux.co.uk for latest BIM information

Product Version: Revit Architecture 2008

7454 Downloads

A roof based insulation cricket designed to go on top of a flat roof structure. All 3 points are adjustable and have a slope arrow and height labels that can be turned on and off.

Product Version: Unknown

5179 Downloads

Lined based detail component to be used in roof details
Layers - 1/4" thick mineral cap sheet, 3/4" thick built up roof, 3" thick rigid insulation.

No Rating

Product Version: Unknown

3251 Downloads

This vent can replace the ugly dormer vents used on the roof.

This is a face based family.   enjoy!

Product Version: Revit Architecture 2015

2773 Downloads

This is a set of rafters for a gable roof california framed into another roof with variable bearing heights on each rafter end. Not sure if this is useful in it's present state...

Product Version: Unknown

4179 Downloads

This is a set of roof rafters with adjustable spans on either end. It is for a two-cut plumb roof.

No Rating

Product Version: Unknown

2597 Downloads

This is a set of rafters for a gable roof with symmetrical span but differing overhang lengths. It is for a two-cut plumb roof.

Product Version: Unknown

2737 Downloads

The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet.

No Rating

Product Version: Revit Architecture 2019

284 Downloads

The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet.

No Rating

Product Version: Revit Architecture 2019

150 Downloads

Rail (0.5 m height) at the access hatch and around skylights etc. from supports when ascending/descending to the roof and shall prevent people from going onto roof areas that cannot withstand the weight of a person.

They are also approved for the anchoring of personal fall protection according to SS 831333.

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

607 Downloads

MIFAB® Series Series R1270 combined large sump roof drain and secondary overflow system; consisting of 24” x 42 “ galvanized sump receiver, two lacquered cast iron roof drain bodies with 15” diameter anchor flange, cast iron waterproofing membrane clamp rings with integral gravel stop, one 4” ABS overflow standpipe and two self-locking polyethylene dome strainers with a combined free area of 250 square inches.

No Rating

Product Version: Unknown

747 Downloads

Roof cricket that is easy to use and reflect actual construction size for 1/2:12 sloped insulation. made with complex trig formulas. easily gives you slopes in all directions. Roof hosted. INSTRUCTIONS: place on roof surface. Adjust Li & Hi (i.e. lenght and depth of cricket) in decimal FT and align to the walls. only works on right angles.

No Rating

Product Version: Unknown

1113 Downloads

MIFAB® Series R1200-Z lacquered cast iron deep sump roof drain with 20” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

64 Downloads

MIFAB® Series R1200-SO lacquered fabricated deep sump roof drain with No Hub side and bottom outlet, 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, and standard selflocking low profile aluminum dome strainer.

No Rating

Product Version: Unknown

164 Downloads

MIFAB® Series R1200-R lacquered cast iron deep sump roof drain with 15” diameter anchor flange, 2” high cast iron external combined water dam and waterproofing membrane clamp ring, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

195 Downloads

MIFAB® Series R1200-JC lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

65 Downloads

MIFAB® Series R1200-HC lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, adjustable extension with auxiliary drainage slots, secondary clamp, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

49 Downloads

MIFAB® Series R1200-G lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

74 Downloads

MIFAB® Series R1200-90 lacquered cast iron deep sump roof drain with threaded side outlet, 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

Product Version: Unknown

262 Downloads

MIFAB® Series R1200 lacquered cast iron deep sump roof drain with 15” diameter anchor large cast iron membrane clamp ring with integral gravel stop, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

662 Downloads

Modified an existing roof vent model for this pretty common type seen on old houses.

No Rating

Product Version: Revit Architecture 2018

3088 Downloads

MIFAB® Series R1100-RS lacquered cast iron roof deck condensate receptor drain with anchor flange, cast iron waterproofing membrane clamp ring with integral gravel stop, overflow and cast iron dome strainer.

No Rating

Product Version: Unknown

63 Downloads

MIFAB® Series R1100-JC lacquered cast iron roof drain with anchor flange, cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 43 square inches.

No Rating

Product Version: Unknown

112 Downloads

MIFAB® Series R1100-G lacquered cast iron roof drain with anchor flange, cast iron waterproofing membrane clamp ring with integral gravel stop, stainless steel perforated 6” (152) high ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 43 square inches.

No Rating

Product Version: Unknown

139 Downloads

Roof Cap L1000 x B500 x H500

Product Version: Revit MEP 2013

3146 Downloads

MIFAB® Series R1100-F lacquered cast iron roof drain with anchor flange, cast iron water proofing membrane clamp ring with integral gravel stop, accuflow parabolic weir (specify -F1, -F2, -F3 for one, two or three slots), and standard selflocking polydome strainer with a free area of 43 square inches.

No Rating

Product Version: Unknown

199 Downloads

Roof transit electricity

Product Version: Revit MEP 2013

828 Downloads