 |
The function of the anchor loops and ridge rail is to rofm an anchor point for personal fall protection. The ridge rail is used on pitched roofs; on low-pitched roofs (pitches of less than 6 degrees) with asphalt or artificial material-based sealing surfaces, anchor loops are used.
Made in Sweden by CW Lundberg AB |
No Rating |
Product Version: Revit Architecture 2018
408 Downloads
|
|
 |
The function of the anchor loops and ridge rail is to rofm an anchor point for personal fall protection. The ridge rail is used on pitched roofs; on low-pitched roofs (pitches of less than 6 degrees) with asphalt or artificial material-based sealing surfaces, anchor loops are used.
Made in Sweden by CW Lundberg AB |
No Rating |
Product Version: Revit Architecture 2018
251 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
96 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
44 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
72 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
50 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
40 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
100 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
47 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
|
Product Version: Revit Architecture 2019
47 Downloads
|
|
|
 |
|
|
Product Version: Revit Architecture 2009
7475 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
35 Downloads
|
|
|
 |
Generic Roof Top Unit, fully parametric to define height of curb, size of RTU, etc. My first upload... I know it's not much, but perhaps it is useful to somebody. |
|
Product Version: Revit Architecture 2012
2836 Downloads
|
|
|
 |
direct set trapezoidal window. full parameters: height, width & top slope [top slope of trapezoid defined by roof slope (6:12, 9:12, etc)]. |
|
Product Version: Revit Architecture 2011
10544 Downloads
|
|
|
 |
Vent for pressure equalizaton of roof constructions. Can be supplied in stainless steel and in various plastic types. |
No Rating |
Product Version: Revit Architecture 2019
108 Downloads
|
|
|
 |
This is a helix Wind turbine from HelixWind.com. This is model S594 according to the spec sheet I modeled it from. This particular model is meant to mount to horizontal planes such as a floor or roof. Image shows wall mounted Turbine. Modeled for Sebass. |
|
Product Version: Revit Architecture 2008
2503 Downloads
|
|
|
 |
MIFAB® Series R1200-PR15” lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, square adjustable collar and standard 15” (381) square ductile iron tractor grate with 3/8” (9) maximum width drainage slots and a free area of 80 square inches. |
No Rating |
Product Version: Unknown
177 Downloads
|
|
|
 |
Fully parametric Rainwater System object created in Revit Architecture 2016. This object is an evaluation version and will be replaced with final versions in September 2016.
Please send feedback to informationgateway@lindab.com and help us improving these objects. We will release the rainwater systems 125/87, 125/100, 150/87 and 150/100 in September 2016.
The family type is Speciality Equipment.
Prefered work order:
1. Component - Place a component
2. Placement - Place on work plane
3. Placement plane - Pick...
4. Specify a new work plane - Pick a plane - OK
5. Select the vertical face of the roof edge
6. Click a start and end point. From Left to Right.
For more families from Lindab, visit www.lindab.com/bim
For a complete free of charge LindabRevitLibrary, visit www.lindab.com/lindabrevitlibrary |
|
Product Version: Revit Architecture 2016
2659 Downloads
|
|
|
 |
Land Rover Evoque - This is a special request so here it is. All materials listed under EVOQUE for easy location and changing of colors and materials. Set up so you can change the Roof, Main body, Lower Panels and even the Lower Aluminum trim to suit your needs. Enjoy and hope it helps.
NOTE: AutoCAD 2007 file included for those wanting to import into later versions of Revit.
Comments Suggestions always welcomed please! |
|
Product Version: Revit Architecture 2012
28136 Downloads
|
|
|
 |
MIFAB® Series R1100-PJ lacquered cast iron roof drain with anchor flange, cast iron water proofing membrane clamp ring, stainless steel perforated extension and standard 1” (25) thick, 8” (203) square adjustable ductile iron tractor grate. |
No Rating |
Product Version: Unknown
85 Downloads
|
|
|
| |
Roof based Stormwater Downpipe spreader with elbow. |
|
Product Version: Revit Architecture 2008
3296 Downloads
|
|
|
 |
this is a generic model family that I created to use on the roof of a Sukkah (Jewish Harvest Festival booth for those who don't know). |
|
Product Version: Revit Architecture 2011
4980 Downloads
|
|
|
 |
As a beautiful finish on both the roof and facade, the JUAL ROOFLINE Parapet System is used for buildings with flat roofs. |
No Rating |
Product Version: Revit Architecture 2019
1037 Downloads
|
|
|
 |
2-24" round rain cap for roof vent/flue. Adjustable height etc. Haven't quite able to figure out how to adjust radial length of connecting supports at lower sizes. |
|
Product Version: Revit MEP 2012
10152 Downloads
|
|
|
 |
As a beautiful finish on both the roof and facade, the JUAL ROOFLINE Parapet System is used for buildings with flat roofs. |
No Rating |
Product Version: Unknown
655 Downloads
|
|
|
 |
Wall based, Revit 2103 version.
Flue has Yes/No control, is hosted in wall but with no real need for a void there.
Material controls for flue sections and roof downdraft diverter
Manufacturers stock colours built in to heater so load family into project and hit render = good to go.
|
No Rating |
Product Version: Revit Architecture 2013
3987 Downloads
|
|
|
 |
This soil pipe ventilation is for insertion into soil pipes that terminate below roof surface. The range fits soil pipes with DN-diameters from ø50 to ø200 mm.
|
No Rating |
Product Version: Revit Architecture 2019
234 Downloads
|
|
|
 |
The soil pipe ventilation with double pipe has an movable pipe for installation in a soil pipe which is lead through the roof surface. It fits soil pipes in DN diameters from ø50 to ø110 mm. |
No Rating |
Product Version: Revit Architecture 2019
427 Downloads
|
|
|
 |
1950-1967 Volswagen Type 2 (T1) Van - This is a special request so i hope its what you needed. Set up to change the color of the Roof, Bumpers, Window trim, and two tone body colors. You can also change the interior floors, and two tone interior, as well as the window colors: Rear, sides, doors and windshield, including two tone wheels and even the logo on the front. All materials are listed under VW T1 for easy location and changing of materials.
NOTE: AutoCAD file to large to download, sorry
FILE TYPE: Revit 2012 64 Bit |
|
Product Version: Revit Architecture 2012
28441 Downloads
|
|
|
 |
Semi Parametric Wishing Well. Materials are type parameters. Wishing well height, well height, bucket evelation, spindle height, handle rotation & roof length are all instance parameters. Based on a design that I found online. |
|
Product Version: Revit Architecture 2012
2565 Downloads
|
|
|
Search