 |
This casework family is a model of American Woodmark's two doors, one drawer, four roll out trays base cabinet. The trays are not supposed to be adjustable, but in this model you can adjust the height of the top two trays. All components operate independently. Materials are pre-defined and assigned via casework subcategories. American Woodmark offers three widths which are included as family types. The URL parameter opens the catalog wherein this cabinet is found. The URL changed slightly, so if it does not work in some of my other models, replace their URL's with this one, which works (at least of today). |

|
Product Version: Revit Architecture 2012
4282 Downloads
|
|
 |
This casework family is a model of American Woodmark's single door, single drawer model, which includes one adjustable shelf. The door and drawer both open. The door is reversible. The URL parameter opens the catalog wherein you can find this cabinet. The five widths offered by American Woodmark are included as family types along with their model numbers. All materials are pre-defined and assigned via casework sub-categories.
I've upgraded this model. The door opens more reliably. Best practice for operating it is to open and close it in angular increments of something less than 90°. The face plates have more ornate engravings and curved handles. |
No Rating |
Product Version: Revit Architecture 2013
5439 Downloads
|
|
 |
MIFAB® Series F1580 powder epoxy coated deep sump drain with secondary dome strainer, bottom outlet and extra heavy duty 24” x 24” (610 x 610) two section ductile iron grates with a free area of 200 square inches (129,032²). Grates to have maximum 13/16” (21) openings. |
No Rating |
Product Version: Unknown
245 Downloads
|
|
 |
Series Dead Level P Pre-Sloped Trench Drain System with 6 in.(152mm) wide x 48 in.(1219mm) long (standard) UV stabilized glass-filled polypropylene frame, UV stabilized talc-filled polypropylene channels with integral 4 in.(102mm) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code. |
No Rating |
Product Version: Revit MEP 2014
221 Downloads
|
|
| |
Lap pool 75'2" long, 42' wide to accomodate 6 lanes. 9 foot deep-end, steeply slopes to 6 ' deep, then slowly slopes up to 3' deep shallow end. I've made the concrete walls for a pool of the above dimensions. Capped it with an Aluminum gutter. And filled the pool with the correct mass of water. Beware the water might not show up in your standard views becuase "mass" objects and families generally are hidden (thus you will need to tweak your visual settings, or unhide>category>mass). Also be sure to create your site around the pool extents, or excavate the necessary hole for placing the pool. If you simply put the pool on a pre-made site the site won't recognize the walls as retention and you will appear to have a pool full of dirt. |

|
Product Version: Unknown
16162 Downloads
|
|
 |
CB-624 or CB-2424 Catch Basin for Series Dead Level Pre-Sloped Trench Drain System, 6 in. (152mm) or 24 in. (610mm) (specify) wide x 24 in.(610mm) long x 24 in.(610mm) deep, with UV stabilized talc-filled polypropylene body with 4 in. (102mm) and 6 in. (152mm) no hub outlet connections, and polypropylene (6 in. wide only) or ductile iron frame. Catch Basin shall be frame-anchored, with (specify) grating and lockdowns to suit DIN Class (specify) load rating. Installation to be performed in accordance with manufacturer's recommendations. |
No Rating |
Product Version: Revit MEP 2014
1152 Downloads
|
|
 |
Series G1070 and GP1070 thermostatic gooseneck faucets feature an advanced thermal actuator to provide the latest in thermal protection. The single-lever cartridge, with integral ceramic discs, provides both temperature and volume control. LavSafe automatically mixes hot and cold water to deliver pre-set water within a specific range. In the event of cold water failure, the thermal actuator virtually shuts off the flow of hot water. LavSafe is listed to ASSE 1070, IAPMO cUPC, and NSF 61 Section 9 Annex G. |
No Rating |
Product Version: Revit MEP 2014
636 Downloads
|
|
 |
Series 1070 and P1070 LavSafe thermostatic faucets feature an advanced thermal actuator to provide the latest in thermal protection. The single-lever cartridge, with integral ceramic discs, provides both temperature and volume control. LavSafe automatically mixes hot and cold water to deliver pre-set water within a specific range. In the event of cold water failure, the thermal actuator virtually shuts off the flow of hot water. LavSafe is listed to ASSE 1070, IAPMO cUPC, and NSF 61 Section 9 Annex G. |
No Rating |
Product Version: Revit MEP 2014
786 Downloads
|
|
 |
The Pronto!™ FD-190-PR-60 PVC adjustable floor drain offers 1 3/4” pre- and 7/8” post-pour adjustability with an integrated bubble level, two leveling shims and a reversible clamping collar with weepholes to ensure professional results. This floor drain also features an anchor flange, round nickel bronze strainer, and a solvent weld outlet. Options include vandal-proofing, trap primer tapping, a backwater valve, side outlet and a choice of funnels. |
No Rating |
Product Version: Revit Structure 2014
713 Downloads
|
|
 |
This is a casework family model of American Woodmark's 1 door, 1 drawer, 1 deep roll out tray, 1 adjustable shelf base cabinet. The door, drawer, and tray all operate independently. The shelf is vertically adjustable and is held in place with clips. The five widths offered by American Woodmark are included as family types. Materials are pre-defined and assigned using casework subcategories.
I have updated this model. It has more subtle engraving on the doors, curved handles, and the door opens more reliably. Open it in angular increments of something less than 90°. For example, if you want it opened to 90°, do it in two operations with the first angle 70° and then go to 90°. Close it the same way. |

|
Product Version: Revit Architecture 2013
3934 Downloads
|
|
 |
Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Position: Hanging or StationaryThis cup was originally designed to be hung on hooks within an antique butler's pantry. However, it can also be used in a stationary setting by selecting one of the pre-set "Type" values or by setting the instance parameters (Height and Angle) to zero (0) degrees. This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Dimmensions", you can change the Height of the Cup (Height), Angle of the Cup (Angle of Cup), and the rotation of the handle (Handle Rotation). These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish. |
No Rating |
Product Version: Revit Architecture 2020
943 Downloads
|
|
 |
This rather complicated casework family is American Woodmark's one door, one drawer, one adjustable shelf, one factory installed drawer accessory kit base cabinet. American Woodmark offers four standard cabinet widths with eight drawer accessory kit permutations per width. I've made all permutations family types, so there are 32 types. The door opens and the drawer slides out. There is a control for sliding the accessory back to clear the drawer, although some of the accessories shouldn't be moved. For example, the chopping block is designed to slide back into the cabinet so you have access to the drawer contents, but the spice accessory sits in the bottom of the drawer and should not be moved.
I've noticed that sometimes it is problematic to try to change the type of a model you've already inserted. If this happens, delete the inserted model and reinsert it with the desired type pre-selected. |
No Rating |
Product Version: Revit Architecture 2012
5194 Downloads
|
|
 |
OVER-ALL
Art. S.1910W 9 MODULES LED 3000K Max. 700mA 1755lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1569lmRated input power: 20.2WLuminaire efficacy: 78lm/WRequires remote ON-OFF power supply or Dimmable power supply CE - ENEC 03LUMINAIRE TYPESurface mounted up-light fitting . IP rating IP 65 IP67MATERIAL CHARACTERISTICSDie cast EN AB-47100 aluminium (low copper content) housing with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Mechanical resistance IK 08 Maximum load capacity --LIGHTING PERFORMANCEClear polycarbonate lenses. Toughened glass 5mm Micro Over-all, 6mm Mini Over-all, 8mm Over-all. Lamp fixed position. LOR -- LOW SURFACE TEMPERATURESurface temperature of glass -- (Ta 25°C)INSTALLATION AND MAINTENANCEA4 stainless steel fixing clips. Over-all is supplied with a nylon insulating fixing base and 2 special keys (necessary to remove the luminaire). Allowing direct fixation to the solid ground.WIRINGSupply 5m cable section type H07RNF sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS III . Available colours: Aluminium grey (cod.14). Weight: 2.13 Kg Glow Wire test: --LED circuit included.OVER-ALL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. |
No Rating |
Product Version: Revit Architecture 2018
494 Downloads
|
|
 |
POOL SPOT
Art. S.3693 12 MODULES LED RGBW (W=6000K) 24VdcRated luminaire luminous flux: 430lmRated input power: 31WLuminaire efficacy: 14lm/WRequires remote ON-OFF power supply or Dimmable power supply CELUMINAIRE TYPESubmersion luminaire. IP rating IP 68MATERIAL CHARACTERISTICSTalc-filled technopolymer housing. Marine grade stainless steel AISI 316L front trim 2 mm thick. A4 grade Stainless Steel screws with 2,5-3% molybdenum content whitch increases the resistance against corrosion. Toughened transparent glass 4mm thick for MICROPOOL SPOT, 8mm MINIPOOL SPOT and POOL SPOT. Mechanical resistance IK 10 Silicone gaskets.LIGHTING PERFORMANCEThe spectral distribution of the light is intended to change the appearance of the scene or object lit. Not intended for use in other applications. Lamp fixed position. LOR -- WIRINGPOOL SPOT requires a FLANGE accessory to anchor the fitting to the bottom of pools or fountains. The stainless steel flange is supplied with fastening screws, both for fixing the fitting to the flange and for the anchorage to the bottom of the pool. Should the fixation with screws be impossible, the weight of the accessory still allows to keep the luminaire sitting on the bottom of the pool. Single cable entry with M20 brass cable gland. Luminaire hard wired with 6 m. cable (5 x 1mm²) cable type H07RN8-F for MICROPOOL RGBW, 6 m. cable (5 x 1mm²) cable type H07RN8-F for MINIPOOL RGBW and 8 m. cable (5 x 1mm²) cable type H07RN8-F for POOL RGBW closed by cable gland and sealed with B component epoxy resin, wired internally protected by silicon sheaths Isolation: CLASS III . Available colours: Stainless steel (cod.19). Weight: 4.48 Kg LED circuit included. Not suitable to install outside the water.The luminaire cannot be installed out of the water. Not compatible with pools containing salt water and that are treated with salt water chlorinationPOOL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. |
No Rating |
Product Version: Revit Architecture 2018
1067 Downloads
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 18 flexible endoscopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying with 6LPM per scope. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Scope Hooks: stores 18 flexible endoscopes
Reusuable Drying Connectors: including Auxiliary Water
Padded Lower Wall: distal tip protection
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Air Manifold: quick disconnect for 18 connectors
Removable Drip Tray
Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
http://www.massmedicalstorage.com/endoscopy-storage/18-scope-hepa-grade-drying-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
533 Downloads
|
|
 |
Premier SIPS, North America’s largest manufacturer of Structural Insulated Panels (SIPs), has been manufacturing SIPS for more than 20 years. Our testing and analysis programs have produced an extensive and comprehensive amount of proprietary data that allows us to help design professionals optimize designs with respect to both structural and energy concerns. Arming yourself with a SIPS product that is backed up with this accurate data helps you streamline the design process and make informed, dependable decisions.
Available at Autodesk: http://seek.autodesk.com/product/latest/agg/premiersipsbyinsulfoam/Premier-SIPS-by-Insulfoam/PremierSIPS
Premier SIPS by Insulfoam: Premier Structural Insulated Panels, SIPs, Structural Panels, Advanced Framing, Structural Wall Systems, Building Envelope Systems, Sandwich Panel, Pre-Fabricated Panel - |

|
Product Version: Unknown
4911 Downloads
|
|
 |
It is a Line based detail component rather than a symbol. I made it this way so the overall length would stay the same if the scale changed. The text will change with the view scale and in the instance properties there is an input for a scale to change the arrow and circle sizes. (I preprogramed the typical scales so you can see how they work) There are 3 types of arrow heads and the text can be controlled separately.
Edit* the scale things does not work atm I will tryand fix it later.
Hope it helps,
smh |
No Rating |
Product Version: Revit Architecture 2014
2185 Downloads
|
|
 |
Download: http://bimobject.com/en/steelpro/product/sp200_l_residental
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
Steelpro’s SP200 staircase system is one of a kind. Stairs are always delivered premade and only requires assemble at the construction. The whole product is made of aluminium parts that are manufactured using extrusion technique, cut and bolted together. This pre thought concept leads to a very stylish and reliable product. |

|
Product Version: Unknown
15241 Downloads
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 4 small scopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Removable Drip Tray
Small Scope Rack
Center Separator Scope Rack
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
170 Downloads
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 8 small scopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Removable Drip Tray
Small Scope Rack
Center Separator Scope Rack
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
214 Downloads
|
|
 |
The ROBOT Storage Cabinet is designed to efficiently store 4 robotic adapters, including HEPA air filtration. Easy customizations are also available to maximize your storage needs.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.
Air Supply: High flow rate channel drying. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Removable Drip Tray
Adjustable M1295 Scope Holders and Separator Racks: stores up to 4 scopes with robotic adapters
Center Separator Scope Rack
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
https://www.massmedicalstorage.com/product/robot-storage-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
162 Downloads
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 9 flexible endoscopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying with 6LPM per scope. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Scope Hooks: stores 9 flexible endoscopes
Reusuable Drying Connectors: including Auxiliary Water
Padded Lower Wall: distal tip protection
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Air Manifold: quick disconnect for 9 connectors
Removable Drip Tray
Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
http://www.massmedicalstorage.com/endoscopy-storage/9-scope-hepa-grade-drying-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
219 Downloads
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 8 flexible endoscopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying with 6LPM per scope. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Scope Hooks: stores 8 flexible endoscopes
Reusuable Drying Connectors: including Auxiliary Water
Padded Lower Wall: distal tip protection
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Air Manifold: quick disconnect for 8 connectors
Removable Drip Tray
Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
http://www.massmedicalstorage.com/endoscopy-storage/8-scope-hepa-grade-drying-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
161 Downloads
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 4 flexible endoscopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying with 6LPM per scope. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Scope Hooks: stores 4 flexible endoscopes
Reusuable Drying Connectors: including Auxiliary Water
Padded Lower Wall: distal tip protection
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Air Manifold: quick disconnect for 4 connectors
Removable Drip Tray
Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
http://www.massmedicalstorage.com/endoscopy-storage/8-scope-hepa-grade-drying-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
124 Downloads
|
|
 |
SERGIO ROMA - Round Gooseneck Sink Mixer
WELS Rating: WELS star rating
Supplied with: 35mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
No Rating |
Product Version: Revit Architecture 2011
4769 Downloads
|
|
 |
SERGIO VELO - Oval Gooseneck Sink Mixer
WELS Rating: WELS star rating
Supplied with: 35mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|

|
Product Version: Revit Architecture 2011
4048 Downloads
|
|
 |
SERGIO URBA - Square Goosemeck Sink Mixer
WELS Rating: WELS star rating
Supplied with: 35mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
No Rating |
Product Version: Revit Architecture 2011
4375 Downloads
|
|
 |
SERGIO EGO - Sink Mixer
WELS Rating: WELS 3 star rating
Supplied with: 40mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
No Rating |
Product Version: Revit Architecture 2011
5347 Downloads
|
|
 |
SERGIO YOURKE - Coil Sink Mixer
WELS Rating: WELS star rating
Supplied with: 35mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|

|
Product Version: Revit Architecture 2011
6075 Downloads
|
|
 |
SERGIO EGO SPRAY - Sink Mixer with Pull-out Spray
WELS Rating: WELS 3 star rating
Supplied with: 40mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|

|
Product Version: Revit Architecture 2011
4036 Downloads
|
|