BLINKER

Art. S.6080W 1 MODULES COB 3000K  220-240Vac 2419lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 567lmRated input power: 23WLuminaire efficacy: 25lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 06LIGHTING PERFORMANCEReflector in 99.98% pure anodized aluminium . Acid-etched toughened glass 4 mm thick. LOR -- INSTALLATION AND MAINTENANCEThe recessing box is provided with support ribs that make it crush-proof during installation; the ribs are molded to the recessing box and cannot fall out before installation. The ribs must be removed before the installation of the luminaire. The lamp body is secured to the recessing box through stainless steel clips; the electric components are protected by a covering reflector that houses the light source. WIRINGSingle cable entry . Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.28 Kg Glow Wire test: --LED circuit included.BLINKER REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

254 Downloads

This casework family is a base sink unit with two doors.  The doors open with an instance parameter.  It comes with designated materials assigned through casework sub-categories.  It is modeled on an American Woodmark unit and the URL parameter takes you to their site.  There are ten pre-defined widths.

No Rating

Product Version: Revit Architecture 2012

8236 Downloads

This casework family represents an American Woodmark base unit with two large drawers and one smaller one.  All pre-defined materials are assigned via casework sub-categories.  The URL opens the Drawer Base Cabinet catalog wherein you can find the 8 models included in the family.  Each drawer can be individually opened using one of the three instance parameters created for that purpose.

Product Version: Revit Architecture 2012

11327 Downloads

This casework family is a model of an American Woodmark wall cabinet.  It sports two doors that can be opened individually, and three adjustable shelves with clips.  The materials are pre-defined and assigned through casework subcategories.  The URL opens the catalog wherein this cabinet can be found.  American Woodmark offers two widths and both are family types.

Product Version: Revit Architecture 2012

11220 Downloads

Laundry Cart on casters. Optional hanging rack visibility parameter. Commonly used in commercial laundromats.

Product Version: Revit Architecture 2019

2514 Downloads

This casework family is a model of an American Woodmark cabinet.  It has two doors that can be opened individually, one drawer that can be pulled out, and an adjustable shelf.  All materials are pre-defined and are assigned via casework sub-categories.  American Woodmark only offers two widths of this cabinet.  One width, the 27", has a half-depth shelf.  Clips hold the shelf in place.

No Rating

Product Version: Revit Architecture 2012

7068 Downloads

MIFAB® WHB Series (specify size) nesting type bellows operated water hammer arrestor with male N.P.T. connection. Bellows and body casing made of Type 304 stainless steel. WHB Series is certified to the PDI WH-201 Standard. Engineered to limit line system surge pressure UPto 1500 P.S.I.G. shall be sized and located in accordance with manufacturer’s instructions.

No Rating

Product Version: Unknown

59 Downloads

This casework family model is of an American Woodmark wall cabinet.  It has one reversible operating door and three adjustable shelves.  The materials are pre-defined and assigned using casework subcategories.  The URL parameter opens the American Woodmark wall cabinets catalog wherein this cabinet can be found.  The five widths offered by American Woodmark are included as family types.

Product Version: Revit Architecture 2012

9360 Downloads

MINISTAGE ROUND SPOT

Art. S.1315W1 MODULES COB 3000K  220-240Vac 1225lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1040lmRated input power: 11.2WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEProjector. IP rating IP 66MATERIAL CHARACTERISTICSDie-cast EN AB-47100 aluminium housing with high corrosion resistance.Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCE99.98% pure aluminium reflectors, or with concentrating lenses: The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source. Clear toughened glass. LOR -- INSTALLATION AND MAINTENANCEThe tempered front glass diffuser is fixed externally to the fitting through silicon resin, perfectly flush with the front ring. Water and dirt deposits that can disturb the lighting performance of the projector can easily flow away. WIRINGSupply 5m cable section type FEP/FEP + PCP (Microstage and Ministage) or FLAT (Stage and Megastage) sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 1.73 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGN MICROSTAGE BLADE OF LIGHT PATENTED, REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

2316 Downloads

Insertion-Style: Face-Based. Parametric: Width, Depth, Height, and Material. Types: Hinged or Top-Sliding. Visibility: Coarse, Medium, and Fine varries. While the box itself is fully-parametric, the shoe-support is not. That is why I decided to make the box un-breakable by using "if" statements. That is to say, if a dimension becomes smaller than the shoe-support, it will revert to a pre-set value. Regarding the visibility, it will progressivley loose details as-needed (showing up as a simple box when "Coarse" is selected). 

No Rating

Product Version: Revit Architecture 2020

257 Downloads

This American Woodmark casework family is an upper wall cabinet with a top hinge door.  The door opens with an instance parameter.  There are pre-defined materials assigned with casework sub-categories.  There are six models with a URL that opens the American Woodmark catalog wherein this cabinet is found.

No Rating

Product Version: Revit Architecture 2012

8005 Downloads

This casework family is a model of an American Woodmark base cabinet with two doors, two drawers, and an adjustable half-depth shelf.  Each door and drawer can be opened individually.  The shelf moves up and down and is held in place with clips.  The materials are pre-defined and assigned through casework sub-categories.  The family includes the URL to open the American Woodmark catalog wherein this cabinet, with its four standard widths, can be found.

No Rating

Product Version: Revit Architecture 2012

7167 Downloads

This American Woodmark casework family cabinet is a single door cabinet with no drawer or shelf.  It is intended for vertical tray storage.  The door opens with an instance parameter and is reversible.  The pre-defined materials are assigned via casework sub-categories.  The URL parameter opens the catalog wherein this cabinet is found.  Although the width is adjustable, American Woodmark offers only the 9" unit included as the sole family type.

Product Version: Revit Architecture 2012

7123 Downloads

This casework family is a model of American Woodmark's two doors, two drawers, four roll out trays base cabinet. The trays are not supposed to be adjustable, but in this model you can adjust the height of the top two trays. All components operate independently. Materials are pre-defined and assigned via casework subcategories. American Woodmark offers four widths which are included as family types. The URL parameter opens the catalog wherein this cabinet is found.

No Rating

Product Version: Revit Architecture 2012

5279 Downloads

***  This is a Revit 2017 file  ***

Parametric wall-hosted sign

Panel: Height, Width, Thickness & Distance from Wall.

Post: Diameter, Offset from edge & Projection from face of panel.

Materials: Panel & Post.

No Rating

Product Version: Unknown

3907 Downloads

This American Woodmark casework family is a narrow vertical tray storage unit.  It includes the tray divider and an adjustable shelf.  The door opens with an instance parameter.  The pre-defined materials are assigned with casework sub-categories.  American Woodmark offers this cabinet in a single width, 9", but does also offer a reduced 14" depth.  Both models are included as family types.  The URL opens the catalog wherein you can find this cabinet.

No Rating

Product Version: Revit Architecture 2012

5028 Downloads

This casework family is a model of American Woodmark's two doors, two drawers, two deep roll out trays, and one adjustable shelf base cabinet.  Materials are pre-defined and assigned via casework subcategories.  All movable components operate independently.  American Woodmark offers four widths and they are included as family types.  The URL parameter opens the catalog wherein this cabinet is found.

No Rating

Product Version: Revit Architecture 2012

4547 Downloads

The gutters are available in 4 different sizes and comes in pre-painted steel in 10 different colors, also copper and Magestic.

For size and availability in your country, please visit your local Lindab website.

The Revit file contains gutter types that can be used directly using the built in gutter tool in Revit.

For more families from Lindab, visit www.lindab.com/bim

For a complete free of charge LindabRevitLibrary, visit www.lindab.com/lindabrevitlibrary

Product Version: Revit Architecture 2016

4254 Downloads

This casework family depicts an American Woodmark three door, three drawer cabinet.  Each door and drawer opens or pulls out individually.  The doors hide an adjustable half-depth shelf.  The materials are pre-defined and assigned through casework subcategories.  American Woodmark offers only a single width, 45", and thus that is the only family type.  You can, however, adjust the width if you are installing a custom cabinet.  The URL parameter opens the catalog wherein this cabinet is found.

Product Version: Revit Architecture 2012

8338 Downloads

This casework family is an American Woodmark base cabinet with two doors, one deep roll out tray, one drawer, and an adjustable shelf.  The doors can be opened individually, the tray can be rolled out, the drawer can be pulled open, and the shelf can be moved up and down.  The shelf even has clips holding it in place!  The URL opens the catalog that contains the three available widths.  The pre-defined materials are assigned through casework sub-categories.

No Rating

Product Version: Revit Architecture 2012

5801 Downloads

This casework family is a model of American Woodmark's three doors, three drawers, three deep roll out trays, and six deep roll out trays base cabinet. All movable components operate independently. Materials are pre-defined and assigned using casework subcategories. American Woodmark offers only a single width for this cabinet and thus there is only a single 45" family type. Use the URL parameter to open the catalog in which you can find this cabinet.  This is an upgrade (I fixed a couple of problems).

No Rating

Product Version: Revit Architecture 2012

6178 Downloads

This casework family is a model of American Woodmark's three doors, three drawers, three deep roll out trays, and one adjustable shelf base cabinet.  All movable components operate independently.  Materials are pre-defined and assigned using casework subcategories.  American Woodmark offers only a single width for this cabinet and thus there is only a single 45" family type.  Use the URL parameter to open the catalog in which you can find this cabinet.

No Rating

Product Version: Revit Architecture 2012

5321 Downloads

Wall Cabinet - Open

 *** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• For offset from floor, adjust the "Offset from Floor" parameter under "Dimensions" category.


• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

4199 Downloads

Unofficial Model: Industry West Jointed Wall Shelf. 

https://industrywest.com/collections/in-stock

Product Version: Revit Architecture 2018

12949 Downloads

Series Dead Level BK Pre-Sloped Trench Drain System with 6(152) wide x 48(1219) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4(102) No Hub bottom outlet(s). System shall be frame-anchored, with BK grating. System to include frame connectors, grate lock-downs, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

179 Downloads

This specialty equipment family is a Waste King Legend 8000 in sink disposal.  It was modeled using a Waste King drawing and is replete with a drain connection.  After placing it in plan view, go to an elevation and align the collar to the bottom of your sink.  The pre-defined materials are assigned using specialty equipment sub-categories.  The URL takes you to the Waste King product page for the Legend 8000.  The price as of 2/7/12 is recorded in the cost parameter.  The current price will be shown on the web page.

No Rating

Product Version: Revit Architecture 2012

3082 Downloads

Tábua de Passar Roupas com Armário - Paramétrica, permite:

-Troca do material (estrutura), da tábua, portas, puxador, pézinhos;

-Alterar comprimento, profundidade, altura da estrutura;

-Alterar comprimento e a espessura da tábua de passar individualmente;

-Altetar a espessura da estrutura e da moldura das portas;

-Alterar a altura e a distância dos apoios;

Product Version: Revit Architecture 2020

300 Downloads

This American Woodmark casework family is a one door, one drawer, two deep roll out trays base cabinet.  All components operate independently.  Materials are pre-defined and assigned via casework subcategories.  The door is reversible.  The five widths offered by American Woodmark are included as family types.  The URL opens the catalog wherein you can find this cabinet.

I've upgraded this model.  The door opens more reliably.  Best practice for operating it is to open and close it in angular increments of something less than 90°.

Product Version: Revit Architecture 2013

4732 Downloads

Series Dead Level D Pre-Sloped Trench Drain System with 6 in.(152mm) wide x 48 in.(1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4(102) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

463 Downloads

Series Dead Level DX Pre-Sloped Trench Drain System with 12 in.(305mm) wide x 48 in.(1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with 6 in.(152mm) No Hub Bottom or End outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

267 Downloads