Electrical Distribution Board sized for 30 circuits.

Wall based, with plastic type shell.

Panel not seen in plan, only icon graphic visible in plan, with instance adjustment for distance from wall (for personal prefs)

Suits NZ and Australia markets.

 CBI (NZ)  77-2  General Power Distribution

No Rating

Product Version: Revit Architecture 2013

6294 Downloads

Best Selling Coffee Tables.   Made in the USA.  100% Recycled Steel.  No VOC Power Coat Finishing in a variety of standard colors.

Great Price Point. 

HighTower Group

No Rating

Product Version: Unknown

2536 Downloads

Best Selling Coffee Tables.   Made in the USA.  100% Recycled Steel.  No VOC Power Coat Finishing in a variety of standard colors.

Great Price Point. 

HighTower Group

No Rating

Product Version: Unknown

3153 Downloads

Best Selling Side Multi-Purpose Tables.   Made in the USA.  100% Recycled Steel.  No VOC Power Coat Finishing in a variety of standard colors.

Great Price Point. 

HighTower Group

No Rating

Product Version: Unknown

4585 Downloads

Best Selling Side Multi-Purpose Tables.   Made in the USA.  100% Recycled Steel.  No VOC Power Coat Finishing in a variety of standard colors.

Great Price Point. 

HighTower Group

No Rating

Product Version: Unknown

1891 Downloads

Hardwire - Voice & Data - Wall to Furniture

Use with Hardwire - Power - Wall to Furniture :)

No Rating

Product Version: Revit Architecture 2010

1377 Downloads

Ropatec - Big Star - Wind turbine on custom post support. http://www.ropatec.com/ing_big_star_vertical.php?lin=3

Fin rotor diameter 26 feet (8m)

Overall height: 52 feet (16m)

Nominal power: 20 KVA

Product Version: Revit Architecture 2010

6345 Downloads

POOL SPOT

Art. S.3693 12 MODULES LED RGBW (W=6000K)  24VdcRated luminaire luminous flux: 430lmRated input power: 31WLuminaire efficacy: 14lm/WRequires remote ON-OFF power supply or Dimmable power supply CELUMINAIRE TYPESubmersion luminaire. IP rating IP 68MATERIAL CHARACTERISTICSTalc-filled technopolymer housing. Marine grade stainless steel AISI 316L front trim 2 mm thick. A4 grade Stainless Steel screws with 2,5-3% molybdenum content whitch increases the resistance against corrosion. Toughened transparent glass 4mm thick for MICROPOOL SPOT, 8mm MINIPOOL SPOT and POOL SPOT. Mechanical resistance IK 10 Silicone gaskets.LIGHTING PERFORMANCEThe spectral distribution of the light is intended to change the appearance of the scene or object lit. Not intended for use in other applications. Lamp  fixed position. LOR -- WIRINGPOOL SPOT requires a FLANGE accessory to anchor the fitting to the bottom of pools or fountains. The stainless steel flange is supplied with fastening screws, both for fixing the fitting to the flange and for the anchorage to the bottom of the pool. Should the fixation with screws be impossible, the weight of the accessory still allows to keep the luminaire sitting on the bottom of the pool. Single cable entry with M20 brass cable gland. Luminaire hard wired with 6 m. cable (5 x 1mm²) cable type H07RN8-F for MICROPOOL RGBW, 6 m. cable (5 x 1mm²) cable type H07RN8-F for MINIPOOL RGBW and 8 m. cable (5 x 1mm²) cable type H07RN8-F for POOL RGBW closed by cable gland and sealed with B component epoxy resin, wired internally protected by silicon sheaths Isolation: CLASS III . Available colours: Stainless steel (cod.19). Weight: 4.48 Kg LED circuit included. Not suitable to install outside the water.The luminaire cannot be installed out of the water. Not compatible with pools containing salt water and that are treated with salt water chlorinationPOOL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

1080 Downloads

Selux spent several years in research and development to achieve the aesthetic design and maintenance-free functionality of Sonne, our first totally solar powered luminaire. Off-grid locations need not be off bounds any longer. Equipped with one of a variety of different size solar panels, sealed-gel batteries, and a fixture head fitted with from 26W to 32W compact fluorescent lamps, Sonne is environmentally friendly and can be installed very quickly. This excellently designed lighting system incorporates many innovative features, such as the Smart Controller programmable regulator which controls flow of energy from panels to batteries and lamping. No cabling, no trenching, no wiring, and no electric bills! Sonne carries a 25 year warranty on power output of solar panels. Solar powered lighting from Selux in a quality product, find out more about SONNE!

No Rating

Product Version: Revit Architecture 2010

10060 Downloads

Selux spent several years in research and development to achieve the aesthetic design and maintenance-free functionality of Sonne, our first totally solar powered luminaire. Off-grid locations need not be off bounds any longer. Equipped with one of a variety of different size solar panels, sealed-gel batteries, and a fixture head fitted with from 26W to 32W compact fluorescent lamps, Sonne is environmentally friendly and can be installed very quickly. This excellently designed lighting system incorporates many innovative features, such as the Smart Controller programmable regulator which controls flow of energy from panels to batteries and lamping. No cabling, no trenching, no wiring, and no electric bills! Sonne carries a 25 year warranty on power output of solar panels. Solar powered lighting from Selux in a quality product, find out more about SONNE!

Product Version: Revit Architecture 2010

5373 Downloads

Rinnai VT26 gas califont,  wall based.

MEP connections for gas supply, cold water IN, hot water OUT, 230 v electrical power supply,  no condensate drain  (optional on this model),  materials for  white spray painted metal case, manufacturer logo, copper tubing.

CBI (NZ)  Liquid  71-26 hot potable water reticulation systems

Has local NZ gas regulations module placement on wall relative to window or doors, dowpipes, balconies, internal corners and ground lines as diagram with Yes/No parameter control -  place the unit on the wall and the unit and diagram appear, move to suit the annotated lines until module in correct  place,  click then select Properties and turn off the 2D diagram,  leaving the module alone on the wall.

Modeled from local NZ Rinnai web site  literature.

Revit 2018

Product Version: Unknown

591 Downloads

The VR-600 is a robot used to clean the bottom of artificial lakes. 

The VR-600 is remotely controlled and equipped with rotating brushes and a powerful pump that directly pumps out all loosened sediment – without raising turbidity in the reservoir. The VR-600 is equipped with a video camera that facilitates inspection of the inside of the reservoir. The entire cleaning process is documented and the customer receives both a videotape and a written report.

Dimensions (L x W x H): 735 x 595 x 400 mmPump capacity: 70 m3/hSpeed: Variable from 0.5 to 10 m/min depending on sediment depth.Power consumption: 2.3 kW

No Rating

Product Version: Revit Architecture 2018

1182 Downloads

BLITZ 4 WINDOWS

Art. S.4089W 1 MODULES COB 3000K  220-240Vac 1867lm 17.4W CRI 90 MacAdam step 3Rated luminaire luminous flux: 303lmRated input power: 18.1WLuminaire efficacy: 17lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10LIGHTING PERFORMANCELuminaires come with toughened glass lenses already installed using the appropriate "lens-carrier slide". These may be substituted with coloured dichroic lenses. INSTALLATION AND MAINTENANCEA robust, die-cast aluminium cap is secured to the base with four stainless steel screws. WIRINGDouble cable entries with PG13,5 (Ø 7÷12 mm) cable glands. Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.9 Kg Glow Wire test: 850°CLED circuit included.This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

1060 Downloads

BLINKER

Art. S.6080W 1 MODULES COB 3000K  220-240Vac 2419lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 567lmRated input power: 23WLuminaire efficacy: 25lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 06LIGHTING PERFORMANCEReflector in 99.98% pure anodized aluminium . Acid-etched toughened glass 4 mm thick. LOR -- INSTALLATION AND MAINTENANCEThe recessing box is provided with support ribs that make it crush-proof during installation; the ribs are molded to the recessing box and cannot fall out before installation. The ribs must be removed before the installation of the luminaire. The lamp body is secured to the recessing box through stainless steel clips; the electric components are protected by a covering reflector that houses the light source. WIRINGSingle cable entry . Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.28 Kg Glow Wire test: --LED circuit included.BLINKER REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

258 Downloads

MINIREEF BOLLARD

Art. S.5240W 1 MODULES COB 3000K  220-240Vac 1740lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1090lmRated input power: 16.8WLuminaire efficacy: 65lm/WPower supply Dimmable  DALI 2 / PUSH CELUMINAIRE TYPEBollard fitting. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) and extruded EN AW-6060 with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10LIGHTING PERFORMANCE99.98% pure anodized aluminium reflector. Polycarbonate lens  transparent  with controlled downward light emission for avoiding any glare, UV-stabilised and vandalproof . Lamp  fixed position . INSTALLATION AND MAINTENANCEGarden mounted fixtures are to be installed and used with the ground stake accessory or cemented root flange. These cannot be installed directly to the ground or cement bases without the relative accessories because the contact between the two different materials may lead to an accelerated process of oxidation of the fixture. WIRINGDouble cable entries with grommets. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), BURNISHED BRONZE (cod.20). Weight: 6.13 Kg Glow Wire test: 850°CLED circuit included.This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

490 Downloads

CATCH SQUARE 4LED

Art. S.7406W 4 MODULES LED 3000K  220-240Vac 620lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 415lmRated input power: 7.8WLuminaire efficacy: 53lm/WElectronic ballast  DALI 2 / PUSH CELUMINAIRE TYPEFalse ceiling-recessed down-light fitting. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. Aluminium front trim or Marine grade stainless steel AISI 316L front trim. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 08LIGHTING PERFORMANCEThe led chips are positioned inside specific cowels and are not visible therefore resulting in excellent visual comfort and antiglare characteristics. Toughened  transparent  glass 5mm thick. Lamp  adjustable ±20° position. LOR -- INSTALLATION AND MANTEINANCEThe luminaires are fixed to the falseceiling by a heavy-duty bracket system, adjustable. WIRINGLuminaire hard wired with 0.4m H05RNF cable, supplied with IP67 connector . Isolation: CLASS II . Available colours: Stainless steel (cod.19). Weight: 1.84 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2019

199 Downloads

MINISTAGE ROUND SPOT

Art. S.1315W1 MODULES COB 3000K  220-240Vac 1225lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1040lmRated input power: 11.2WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEProjector. IP rating IP 66MATERIAL CHARACTERISTICSDie-cast EN AB-47100 aluminium housing with high corrosion resistance.Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCE99.98% pure aluminium reflectors, or with concentrating lenses: The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source. Clear toughened glass. LOR -- INSTALLATION AND MAINTENANCEThe tempered front glass diffuser is fixed externally to the fitting through silicon resin, perfectly flush with the front ring. Water and dirt deposits that can disturb the lighting performance of the projector can easily flow away. WIRINGSupply 5m cable section type FEP/FEP + PCP (Microstage and Ministage) or FLAT (Stage and Megastage) sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 1.73 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGN MICROSTAGE BLADE OF LIGHT PATENTED, REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

2350 Downloads

AVENUE STREET LIGHTING 36led

Art. S.3090N36 MODULES LED 4000K  220-240Vac 12614lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 9976lmRated input power: 107WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 66MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp  fixed position . LOR -- POLE CONNECTIONPole mounted in painted aluminium with Ø 102 mm connection. ON REQUEST ADAPTOR for cylindrical poles Ø 76 mm.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H05RN-F cable. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Anthracite grey (cod.24). Weight: 18.96 Kg Glow Wire test: -- Exposed windage area : 0,06 m² ( 1000mm ), 0,05 m² ( 800mm ), 0,04 m² ( 645mm )LED circuit included.AVENUE PATENT PENDINGThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

816 Downloads

PARK SINGLE POLE H=3500mm

Art. S.7100N20 MODULES LED 4000K  220-240Vac 6000lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 4308lmRated input power: 46WLuminaire efficacy: 94lm/WElectronic ballast  ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 65MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp  fixed position . LOR -- POLERectangular extruded aluminum pole with inspection door. Steel zinc-plated mounting flange with stainless steel screws.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H07RNF cable. Single cable entry with PG13,5 (Ø 6÷12 mm) cable gland in PMMA. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 36.01 Kg Glow Wire test: -- Exposed windage area : 0,394 m² ( S.7100N ) Exposed windage area : 0,440 m² ( S.7110N )LED circuit included.PARK REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

715 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  33 Hz- 67 Hz - 3dB27 Hz- 150 Hz - 10dB
  
  


• continuous output
  
  121 dBSPL
  
  


• peak output
  
  127 dB SPL
  
  


• sensitivity
  
  95 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
  
  


• driver complement
  
  one 12" woofer
  
  


• dimensions
  
  24 x 15 x 24 inches
  
  


• weight
  
  83 lbs
  
  


• Rated Impedance
  
  8 Ohms
  
  


• Power Rating
  
  400 W continuous, 800 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/specialty-subs/cs30/
  
  

No Rating

Product Version: Unknown

489 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  18 Hz- 100 Hz -3dB16 Hz -10dB
  
  


• continuous output
  
  122 dB SPL
  
  


• peak output
  
  128 dB SPL
  
  


• sensitivity
  
  95 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
  
  


• driver complement
  
  one 12" long excursion woofer
  
  


• dimensions
  
  87.5 x 18 x 20 inches
  
  


• weight
  
  220 lbs
  
  


• Rated Impedance
  
  8 Ohms
  
  


• Power Rating
  
  500 W continuous, 1000 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/specialty-subs/dts20/
  
  

No Rating

Product Version: Unknown

263 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  44Hz-200Hz -3dB36Hz-200hz -10dB
  
  


• continuous output
  
  142 dB SPL
  
  


• peak output
  
  148 dB SPL
  
  


• sensitivity
  
  119 dBSPL @ 125 Hz (Referenced to 2.83V @1M 1⁄2 space, measured as 28.3V @ 10M)
  
  


• driver complement
  
  Four 12 inch Long Excursion
  
  


• dimensions
  
  50" X 50" X 18"
  
  


• weight
  
  277 lbs.
  
  


• Rated Impedance
  
  2 ohms or 2 x 4 ohms
  
  


• Power Rating
  
  4000 W continuous
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/bc-horns/bc412/
  
  

No Rating

Product Version: Unknown

413 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  34 Hz- 300 Hz -3dB28 Hz - 400 Hz -10dB
  
  


• continuous output
  
  141 dB SPL
  
  


• peak output
  
  147 dB SPL
  
  


• sensitivity
  
  117 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
  
  


• driver complement
  
  two 18" long excursion woofers
  
  


• dimensions
  
  45 x 45 x 22.5 inches
  
  


• weight
  
  277 lbs
  
  


• Rated Impedance
  
  switchablea single 2 ohm loadortwo 4 ohm loads
  
  


• Power Rating
  
  3600 watts continuous 14,400 watt peak
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/dbh/dbh218/
  
  

No Rating

Product Version: Unknown

210 Downloads

SPECIFICATIONS

• coverage Pattern
  
  NA
  
  


• operatingfrequency range
  
  15 Hz- 70 Hz - 3dB12 Hz -10dB
  
  


• continuous output
  
  127 dB SPL
  
  


• peak output
  
  133 dB SPL
  
  


• sensitivity
  
  100 dBSPL (2.83 Volts into rated Z, at 1 meter) measured in half space
  
  


• driver complement
  
  two 12" long excursion woofers
  
  


• dimensions
  
  59.5 x 44 x 16 inches
  
  


• weight
  
  285 lbs
  
  


• Rated Impedance
  
  4 Ohms
  
  


• Power Rating
  
  1000 W continuous, 2000 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/specialty-subs/dts10/
  
  

No Rating

Product Version: Unknown

192 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  19 Hz – 125 Hz - 3 dB 17 Hz -10dB
  
  


• continuous output
  
  120 dB SPL
  
  


• peak output
  
  126 dB SPL
  
  


• sensitivity
  
  94 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
  
  


• driver complement
  
  two 8" long excursion woofers
  
  


• dimensions
  
  11 x 48 x 45 inches
  
  


• weight
  
  156 lbs
  
  


• Rated Impedance
  
  8 Ohms
  
  


• Power Rating
  
  400 W continuous, 800 W program
  
  

No Rating

Product Version: Unknown

105 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  28 Hz - 150 Hz - 3 dB23 Hz – 200 Hz -10dB
  
  


• continuous output
  
  146 dB SPL
  
  


• peak output
  
  152 dB SPL
  
  


• sensitivity
  
  110 dB SPL (2.83 Volts into rated Z, at 1 meter), measured in half space
  
  


• driver complement
  
  eight 12" long excursion woofers
  
  


• dimensions
  
  60 x 60 x 28 inches
  
  


• weight
  
  584 lbs
  
  


• Rated Impedance
  
  Switchablea single 4 ohm loadortwo 8 ohm loads
  
  


• Power Rating
  
  8000 W continuous 16,000 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th-812/
  
  

No Rating

Product Version: Unknown

134 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  22 Hz - 180 Hz - 3 dB 18.5 Hz – 200 Hz -10dB
  
  


• continuous output
  
  138 dB SPL
  
  


• peak output
  
  144 dB SPL
  
  


• sensitivity
  
  109 dB Spl (2.83 Volts into rated Z, at 1 meter), measured in half space
  
  


• driver complement
  
  two, long excursion, 21" woofers
  
  


• dimensions
  
  60 x 60 x 28 inches
  
  


• weight
  
  480 lbs
  
  


• Rated Impedance
  
  switchablea single 2 ohm load ortwo 4 ohm loads
  
  


• Power Rating
  
  3000 W continuous 6000 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th-221/
  
  

No Rating

Product Version: Unknown

110 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  40 Hz - 250 Hz -3 dB28 Hz - 300 Hz -10dB
  
  


• continuous output
  
  137 dB SPL
  
  


• peak output
  
  143 dB SPL
  
  


• sensitivity
  
  108 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
  
  


• driver complement
  
  one 18" long excursion woofer
  
  


• dimensions
  
  40 X 22.5 X 28.5 inches
  
  


• weight
  
  160 lbs
  
  


• Rated Impedance
  
  4 Ohms
  
  


• Power Rating
  
  1700 W continuous, 3400 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th118/
  
  

No Rating

Product Version: Unknown

164 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  38 Hz - 200 Hz - 3 dB33 Hz - 280 Hz - 10 dB
  
  


• continuous output
  
  133 dB SPL
  
  


• peak output
  
  139 dB SPL
  
  


• sensitivity
  
  106 dB SPL (2.83 Volts into rated Z, at 1 meter), measured in half space
  
  


• driver complement
  
  one 15 inch long excursion woofer
  
  


• dimensions
  
  40 X 22.5 X 28.5 inches
  
  


• weight
  
  152 lbs
  
  


• Rated Impedance
  
  4 Ohms
  
  


• Power Rating
  
  1000W continuous, 2000 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th115/
  
  

No Rating

Product Version: Unknown

109 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  38 Hz - 200 Hz +/- 3 dB 31 Hz – 200 Hz -10 dB
  
  


• continuous output
  
  133 dB SPL
  
  


• peak output
  
  139 dB SPL
  
  


• sensitivity
  
  104 dB SPL (2.83 Volts into rated Z, at 1 meter), measured in half space
  
  


• driver complement
  
  two 12" long excursion woofers
  
  


• dimensions
  
  36 x 15 x 36 inches
  
  


• weight
  
  142 lbs
  
  


• Rated Impedance
  
  4 Ohms
  
  


• Power Rating
  
  1400 W continuous, 2800 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th-212/
  
  

No Rating

Product Version: Unknown

86 Downloads