 |
FULL SIZING AND MATERIAL PARAMETERS. FACE-BASED SO CAN BE PLACED ON ANY SURFACE. REVIT 2025 |
No Rating |
Product Version: Revit Architecture 2020
58 Downloads
|
|
 |
FULL SIZING AND MATERIAL PARAMETERS. FACE-BASED SO CAN BE PLACED ON ANY SURFACE. REVIT 2025. |
No Rating |
Product Version: Revit Architecture 2020
57 Downloads
|
|
|
| |
Outdoor timber spa. This is first time I have uploaded. |
|
Product Version: Revit Architecture 2008
5532 Downloads
|
|
|
 |
Adjusted from one I downloaded from this site - hopefully improved somewhat. |
No Rating |
Product Version: Revit MEP 2011
8682 Downloads
|
|
|
 |
100% RAC 2009 - (Not an Autocad import) Not Parametric Generic Model |
|
Product Version: Revit Architecture 2009
23997 Downloads
|
|
|
 |
Pentair 2" Eyeball Fitting |
No Rating |
Product Version: Unknown
1143 Downloads
|
|
|
 |
This is a 16ga three bay sink with 2 12" drain boards. It was created using the dimensions and information from Regency Tables and Sinks model #600S31014212 specification sheet. I think it is pretty close to the actual, but there may be a few discrepancies.
Please rate. |
No Rating |
Product Version: Revit Architecture 2011
5623 Downloads
|
|
|
 |
001 Escada de Piscina Portugal/Brasil.100 % ParamétricoAproveitamP.S.can be translate to english if you want, because it´s ENU family |
|
Product Version: Revit Architecture 2010
11874 Downloads
|
|
|
 |
Deep end= 12', shallow end= 3.5', and gradual slant inbetween. 54X27 feet |
|
Product Version: Unknown
4922 Downloads
|
|
|
 |
Tilt Kettle Drain Cart |
No Rating |
Product Version: Revit Building 5.1
763 Downloads
|
|
|
 |
Turn down slab edges to sloped slab. Grating over the top. Includes detail components in fine detail.
This is my comanies standard trench drain and I got tired of modeling it piece by piece.
Revit 2017 |
|
Product Version: Unknown
3466 Downloads
|
|
|
 |
Stormwater drain 100mm - Pluvetta |
|
Product Version: Revit MEP 2014
1621 Downloads
|
|
|
 |
Wall Mounted 3" Cows Tongue Wall Drain |
|
Product Version: Revit Architecture 2012
5101 Downloads
|
|
|
 |
Wall based object. You can change the rack finish, bottom half, and top half of cues. |
No Rating |
Product Version: Revit Architecture 2013
9250 Downloads
|
|
|
 |
This is based on a swiss timing OSB11 starting block but it's not exact. You can change the number. |
|
Product Version: Revit Architecture 2016
3253 Downloads
|
|
|
| |
4-slope shower with drain |
No Rating |
Product Version: Unknown
2021 Downloads
|
|
|
 |
4-slope shower with drain |
No Rating |
Product Version: Unknown
10637 Downloads
|
|
|
 |
The picture shows steps but they are not part of the family.
You can change the material and the width between the two bars, but not the height or size of the grab bars. |
|
Product Version: Revit Architecture 2016
2255 Downloads
|
|
|
 |
Single post .... just in case you need one.
Revit 2019 |
No Rating |
Product Version: Unknown
1840 Downloads
|
|
|
 |
With swim up bar
Underground
Fits in 30' by 50' area |
|
Product Version: Revit Architecture 2011
11212 Downloads
|
|
|
 |
Glass Vessel Bathroom Sink With PU-MR
Parametric model of Sink with drain. Different materials for drain. Fully Textured. Easily adjustable draintaipice and drain extension. |
|
Product Version: Revit Architecture 2012
19806 Downloads
|
|
|
 |
Line base Drain Channal |
|
Product Version: Revit MEP 2012
5653 Downloads
|
|
|
 |
MIFAB® Series F1240 lacquered ductile iron area drain with ½” (13) thick, 6 ½” (165) diameter heavy duty ductile iron grate with stainless steel screws. Recommended for use in vehicular traffic areas. |
No Rating |
Product Version: Unknown
908 Downloads
|
|
|
 |
The Pronto!™ FD-190-PR-60 PVC adjustable floor drain offers 1 3/4” pre- and 7/8” post-pour adjustability with an integrated bubble level, two leveling shims and a reversible clamping collar with weepholes to ensure professional results. This floor drain also features an anchor flange, round nickel bronze strainer, and a solvent weld outlet. Options include vandal-proofing, trap primer tapping, a backwater valve, side outlet and a choice of funnels. |
No Rating |
Product Version: Revit Structure 2014
722 Downloads
|
|
|
 |
Series FD-200-WD on-grade epoxy coated cast iron floor drain with anchor flange, weepholes, chrome plated secured dome, adjustable standpipe, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
162 Downloads
|
|
|
 |
Series FD-200-K on grade epoxy coated cast iron floor drain with anchor flange, weepholes, adjustable nickel bronze dome strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
835 Downloads
|
|
|
 |
POOL SPOT
Art. S.3693 12 MODULES LED RGBW (W=6000K) 24VdcRated luminaire luminous flux: 430lmRated input power: 31WLuminaire efficacy: 14lm/WRequires remote ON-OFF power supply or Dimmable power supply CELUMINAIRE TYPESubmersion luminaire. IP rating IP 68MATERIAL CHARACTERISTICSTalc-filled technopolymer housing. Marine grade stainless steel AISI 316L front trim 2 mm thick. A4 grade Stainless Steel screws with 2,5-3% molybdenum content whitch increases the resistance against corrosion. Toughened transparent glass 4mm thick for MICROPOOL SPOT, 8mm MINIPOOL SPOT and POOL SPOT. Mechanical resistance IK 10 Silicone gaskets.LIGHTING PERFORMANCEThe spectral distribution of the light is intended to change the appearance of the scene or object lit. Not intended for use in other applications. Lamp fixed position. LOR -- WIRINGPOOL SPOT requires a FLANGE accessory to anchor the fitting to the bottom of pools or fountains. The stainless steel flange is supplied with fastening screws, both for fixing the fitting to the flange and for the anchorage to the bottom of the pool. Should the fixation with screws be impossible, the weight of the accessory still allows to keep the luminaire sitting on the bottom of the pool. Single cable entry with M20 brass cable gland. Luminaire hard wired with 6 m. cable (5 x 1mm²) cable type H07RN8-F for MICROPOOL RGBW, 6 m. cable (5 x 1mm²) cable type H07RN8-F for MINIPOOL RGBW and 8 m. cable (5 x 1mm²) cable type H07RN8-F for POOL RGBW closed by cable gland and sealed with B component epoxy resin, wired internally protected by silicon sheaths Isolation: CLASS III . Available colours: Stainless steel (cod.19). Weight: 4.48 Kg LED circuit included. Not suitable to install outside the water.The luminaire cannot be installed out of the water. Not compatible with pools containing salt water and that are treated with salt water chlorinationPOOL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. |
No Rating |
Product Version: Revit Architecture 2018
1080 Downloads
|
|
|
 |
Series FD-200-VD on-grade epoxy coated cast iron floor drain with anchor flange, weepholes, adjustable round nickel bronze strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
695 Downloads
|
|
|
| |
|
|
Product Version: Unknown
2695 Downloads
|
|
|
 |
Series FD-200-RS on-grade epoxy coated cast iron floor drain with anchor flange, weepholes, adjustable heel proof rectangular nickel bronze strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
2179 Downloads
|
|
|
Search