Series RD-100-CP epoxy coated cast iron roof drain with flashing clamp with integral gravel stop, 12-3/4 in. x 12-3/4 in. (324 x 324mm) suare epoxy coated ductile iron heel proof promenade top, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

92 Downloads

with neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty brass casing, 360 degree swivel inlet connection, heavy duty chrome plated bronze head casting, polished chrome plated face plate, and satin finished nickel bronze box with hinged locking cover. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

29 Downloads

with neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty brass casing, 360 degree swivel inlet connection, heavy duty chrome plated bronze head casting, polished chrome plated face plate, and satin finished nickel bronze box with hinged locking cover. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

39 Downloads

Series FD-230-A epoxy coated cast iron floor drain/cleanout combination with anchor flange, integral trap, membrane clamp with weepholes, adjustable round heel proof nickel bronze strainer & cleanout top, removable plug, and no hub outlet.

No Rating

Product Version: Revit MEP 2014

115 Downloads

Series FD-320-Y-SET epoxy coated cast iron area drain with anchor flange, membrane clamp with weepholes, 8 in. (203mm) diameter fixed top, loose set ductile iron grate supported by bucket, and no hub connection (standard).

No Rating

Product Version: Revit MEP 2014

95 Downloads

Series FD-490-F-4 epoxy coated cast iron cast in place parking deck drain with 17 in x 17 in (432mm x 432mm) square anti-ponding top with membrane clamping flange, heavy duty self-closing hinged grate, aluminum sediment bucket, and no hub outlet.

No Rating

Product Version: Revit MEP 2014

173 Downloads

Series RD-200-CP epoxy coated cast iron promenade roof drain with flashing collar with integral slot drainage, 8 x 8 in. (203x203mm) square heel proof epoxy coated ductile iron promenade top, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

260 Downloads

Series RD-200-CP epoxy coated cast iron promenade roof drain with flashing collar with integral slot drainage, 8 x 8 in. (203x203mm) square heel proof epoxy coated ductile iron promenade top, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

139 Downloads

Series FD-320-SET epoxy coated cast iron area drain with anchor flange, membrane clamp with weepholes, 8 in. (203mm) diameter adjustable top, loose set heel proof ductile iron grate supported by bucket, and no hub connection (standard).

No Rating

Product Version: Revit MEP 2014

65 Downloads

Series FD-340-SET epoxy coated cast iron area drain with anchor flange, membrane clamp with weepholes, 12-1/2 in. (318mm) diameter adjustable top, loose set heel proof ductile iron grate supported by bucket, and no hub connection (standard).

No Rating

Product Version: Revit MEP 2014

47 Downloads

Series FD-340-Y-SET epoxy coated cast iron area drain with anchor flange, membrane clamp with weepholes, 12-1/2 in (318mm) diameter fixed top, loose set heel proof ductile iron grate supported by bucket, and no hub connection (standard).

No Rating

Product Version: Revit MEP 2014

52 Downloads

Series FD-900 epoxy coated cast iron parking deck drain with integral countersunk deck flange, 12-1/2 in. (318mm) round top with secured ductile iron heel proof grate, gasket seal between body and top assembly, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

107 Downloads

Series FD-910 epoxy coated cast iron parking deck drain with integral countersunk deck flange, 15-1/2 in. (394mm) round top with secured ductile iron heel proof grate, gasket seal between body and top assembly, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

92 Downloads

Series FD-920 epoxy coated cast iron parking deck drain with integral countersunk deck flange, 10-7/16 in. (265mm) round top with secured ductile iron heel proof grate, gasket seal between body and top assembly, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

93 Downloads

Series RD-300-CP15 epoxy coated cast iron roof drain with flashing clamp with integral gravel stop, 15-5/8 x 15-5/8 in. (397 x 397mm) square epoxy coated ductile iron heel proof promenade top, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

57 Downloads

Series FD-430 epoxy coated steel side outlet area drain with anchor flange, 12-3/4 in. x 12-3/4 in. (324 x 324mm) square epoxy coated heel proof ductile iron hinged grate, integral trap with cleanout plug, sediment bucket, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

441 Downloads

Series FD-600 epoxy coated cast iron isolation drain with epoxy coated cast iron upper and lower bodies, reversible membrane clamps with primary and secondary weepholes, adjustable round heel proof nickel bronze strainer, neoprene movement compensator coupling, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

62 Downloads

Series FD-620 epoxy coated cast iron isolation drain with epoxy coated cast iron upper and lower bodies, reversible membrane clamps with primary and secondary weepholes, 8 in. (203mm) diameter adjustable top with heel proof ductile iron grate, neoprene movement compensator coupling, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

63 Downloads

The Watts Model LF07S Residential Fire Sprinkler Dual Check Backflow Preventer is designed for non-health hazard [i.e., pollutant] application on potable fire sprinkler service connections to protect against possible backsiphonage conditions that could inadvertently drain the fire sprinkler system.

No Rating

Product Version: Revit MEP 2014

213 Downloads

Series Dead Level BK Pre-Sloped Trench Drain System with 6(152) wide x 48(1219) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4(102) No Hub bottom outlet(s). System shall be frame-anchored, with BK grating. System to include frame connectors, grate lock-downs, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

179 Downloads

This specialty equipment family is a Waste King Legend 8000 in sink disposal.  It was modeled using a Waste King drawing and is replete with a drain connection.  After placing it in plan view, go to an elevation and align the collar to the bottom of your sink.  The pre-defined materials are assigned using specialty equipment sub-categories.  The URL takes you to the Waste King product page for the Legend 8000.  The price as of 2/7/12 is recorded in the cost parameter.  The current price will be shown on the web page.

No Rating

Product Version: Revit Architecture 2012

3087 Downloads

Series Dead Level D Pre-Sloped Trench Drain System with 6 in.(152mm) wide x 48 in.(1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4(102) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

466 Downloads

Series Dead Level DX Pre-Sloped Trench Drain System with 12 in.(305mm) wide x 48 in.(1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with 6 in.(152mm) No Hub Bottom or End outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

268 Downloads

Series TD-300 Elevator Channel Drain with 11-3/4 (298) wide x (specify) long 12 ga. type 304 stainless steel body, heel proof and ADA compliant load class B stainless steel grating with grate open area of 65 sq. in. per foot is secured with vandal-proof stainless steel screws, and 4 (110) no hub center outlet. Complies with 2013 California Building Code 403.6.1, 403.6.2, 3007.4, 3008.4, and SFFC Section 511.1.4 for a flow rate of 100 GPM.

No Rating

Product Version: Revit MEP 2014

488 Downloads

Series Dead Level P Pre-Sloped Trench Drain System with 6 in.(152mm) wide x 48 in.(1219mm) long (standard) UV stabilized glass-filled polypropylene frame, UV stabilized talc-filled polypropylene channels with integral 4 in.(102mm) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

223 Downloads

CB-624 or CB-2424 Catch Basin for Series Dead Level Pre-Sloped Trench Drain System, 6 in. (152mm) or 24 in. (610mm) (specify) wide x 24 in.(610mm) long x 24 in.(610mm) deep, with UV stabilized talc-filled polypropylene body with 4 in. (102mm) and 6 in. (152mm) no hub outlet connections, and polypropylene (6 in. wide only) or ductile iron frame. Catch Basin shall be frame-anchored, with (specify) grating and lockdowns to suit DIN Class (specify) load rating. Installation to be performed in accordance with manufacturer's recommendations.

No Rating

Product Version: Revit MEP 2014

1172 Downloads

A Carrier® fan coil can be a core component of your comfort system. If you could look under the hood, you’d see what drives the performance: a serious commitment to quality. Certain fan coils feature ECM blower motors for optimized airflow, comfort and efficiency. Our Infinity® and Performance™ models step it up with variable-speed air delivery for extra efficiency, quieter operation and even, consistent indoor temperatures. For lasting durability through corrosion protection, the indoor coil includes our high-tech composite base pan with its integrated, sloped drain. The base pan promotes positive drainage to help reduce opportunities for growth of airborne irritants. To ensure maximum reliability and energy-efficient operation, our thermostatic expansion valve (TXV) maintains proper refrigerant flow as pressure and conditions change. Of course, this is the type of excellence you expect when you turn to the experts – Carrier.

No Rating

Product Version: Revit MEP 2018

668 Downloads

The Ductile Iron “Y” type strainer shall be in 125 Class and conform to ANSI B16.1, and both the body and access cover shall be made of Ductile Iron A536 65-45 12. The valve shall be supplied with a drain/blow-off connection with a ductile iron closure plug. The integral strainer screen shall be accessible for cleaning without removing the device from the line.

No Rating

Product Version: Unknown

199 Downloads

The Ductile Iron “Y” type strainer shall be in 125 Class and conform to ANSI B16.1, and both the body and access cover shall be made of Ductile Iron A536 65-45 12. The valve shall be supplied with a drain/blow-off connection with a ductile iron closure plug. The integral strainer screen shall be accessible for cleaning without removing the device from the line.

No Rating

Product Version: Unknown

117 Downloads

Rinnai VT26 gas califont,  wall based.

MEP connections for gas supply, cold water IN, hot water OUT, 230 v electrical power supply,  no condensate drain  (optional on this model),  materials for  white spray painted metal case, manufacturer logo, copper tubing.

CBI (NZ)  Liquid  71-26 hot potable water reticulation systems

Has local NZ gas regulations module placement on wall relative to window or doors, dowpipes, balconies, internal corners and ground lines as diagram with Yes/No parameter control -  place the unit on the wall and the unit and diagram appear, move to suit the annotated lines until module in correct  place,  click then select Properties and turn off the 2D diagram,  leaving the module alone on the wall.

Modeled from local NZ Rinnai web site  literature.

Revit 2018

Product Version: Unknown

591 Downloads