Porta de correr com uma folha fixa e três folhas de correr. Tem parâmetro (por instância) de abertura da folha, para visualização dela aberta ou fechada.

Instance parameter for door opening.

Made in Revit 2022.

No Rating

Product Version: Revit Architecture 2020

222 Downloads

Flush double sliding shower door with changeable material properties. One size only, sorry.

No Rating

Product Version: Revit Architecture 2015

8294 Downloads

This American Woodmark casework family is a model of their one door, one drawer, one roll out tray divider base cabinet.  They offer two widths, 12" and 15", and those are included as family types.  The 12" has a tray divider with two compartments (one divider) while the 15" sports a three compartment divider (two dividers).  All movable components operate with instance parameters.  The trays are not adjustable beyond pulling them out.  There are actually two trays that get swapped in and out with your selection of cabinet width.

I've upgraded this cabinet.  It's a Revit 2013 model now and I've fixed a problem with the door.  The upgraded cabinet is a separate download.

No Rating

Product Version: Revit Architecture 2012

6082 Downloads

Base Cabinet - 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

7420 Downloads

Base Cabinet - 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

Product Version: Revit Architecture 2014

12754 Downloads

Tall Cabinet - 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

9582 Downloads

Tall Cabinet - 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

Product Version: Revit Architecture 2014

15554 Downloads

open pivot door, curtain wall panel shown open with closed panel turned off in visibility - can be reversed to show closed

No Rating

Product Version: Revit Architecture 2009

7297 Downloads

Porta de correr com uma folha fixa e uma folha de correr. Tem parâmetro (por instância) de abertura da folha, para visualização dela aberta ou fechada.

Instance parameter for door opening.

Made in Revit 2022.

No Rating

Product Version: Revit Architecture 2020

137 Downloads

The number and size of windows, height, width and thickness of the door are all controlled by parameters.  In addition, the min and max panel (section) height is controlled by parameters as is the approximate window elevation – I say approximate because I set it up to put the window as close to the specified height as is possible based on the height of each panel.

No Rating

Product Version: Unknown

1939 Downloads

The number and size of windows, height, width and thickness of the door are all controlled by parameters.  In addition, the min and max panel (section) height is controlled by parameters as is the approximate window elevation – I say approximate because I set it up to put the window as close to the specified height as is possible based on the height of each panel.

No Rating

Product Version: Revit Architecture 2013

1545 Downloads

One Door, multiple options.

Adjustable strip size and offset from door handle.

No architrave.

Modeled in Revit 2020. Fully adjustable in Revit except for the frame depts. Two frame sizes available.

Modeled in Revit 2020. Fully adjustable in Revit except for the frame depts. Two frame sizes available.

No Rating

Product Version: Revit Structure 2020

70 Downloads

Horton Automatics "Grand" Revolving Door - 3 Wing

Product Version: Revit Architecture 2008

17545 Downloads

Sectional overhead door with dock seal and 2 pipe guards

Product Version: Revit Architecture 2008

9884 Downloads

Sectional overhead dock door with shelter and 2 pipe guards

No Rating

Product Version: Revit Architecture 2008

3711 Downloads

Single Door - Full Glass - Existing in plan

No Rating

Product Version: Unknown

2349 Downloads

Semi Recessed Basin, 2 Door Vanity

Product Version: Unknown

14385 Downloads

Double Door with adjustable left/right swing

No Rating

Product Version: Revit Building 9.1

4441 Downloads

Another component of the Farmhouse style Kitchen cabinets. Here's the upper double door cabinet.

Product Version: Unknown

40162 Downloads

Single Door Flush with Hinge side window

Product Version: Revit Building 5.1

4016 Downloads

Single Door Flush with latch side window

Product Version: Revit Building 5.1

3276 Downloads

A highly parametric dooor for all of your doooring needs

Parameters: The materials should be self-explanatory, as long as you remember that the interior is the side with the doorknob. Here are the dimensional parameters:

-Doorknob depth: The depth of the doorknob

-Doorknbob X posistion: the X posistion of the doorknob (0 is at the right of the door)

-Doorknob Y posistion: the Y posistion of the doorknob (0 is at the bottom of the door)

-Doorknob base radius: the radius of the end of the dorknob that touches the door

-Doorknob outer radius: the radius of the other end of the doorknob

-Exterior depth: the depth of the exterior part of the door (must be negative)

-Exterior frame thickness: the thickness of the frame on the exterior of the door

Product Version: Unknown

55 Downloads

16' Overhead Garage Door - Waterton 1 Design

Product Version: Revit Building 8.1

11084 Downloads

16' Overhead Garage Door - Stockton Design

Product Version: Revit Building 8.1

20154 Downloads

16' Overhead Garage Door - Prairie Design

Product Version: Revit Building 8.1

17988 Downloads

Door is EBE Porte QN1 available in the US at www.rest-agio.com. Visit the site for full line catalog as well as other luxury finishes from Italy.

No Rating

Product Version: Revit Architecture 2013

7926 Downloads

Base Cabinet - Sink, 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

4940 Downloads

Base Cabinet - Sink, 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

8170 Downloads

Base Cabinet - 1 Drawer above 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

Product Version: Revit Architecture 2014

5413 Downloads

Base Cabinet - 1 Drawer above 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

5864 Downloads