The ROBOT Storage Cabinet is designed to efficiently store 4 robotic adapters, including HEPA air filtration.  Easy customizations are also available to maximize your storage needs.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Removable Drip Tray

Adjustable M1295 Scope Holders and Separator Racks: stores up to 4 scopes with robotic adapters

Center Separator Scope Rack

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

https://www.massmedicalstorage.com/product/robot-storage-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

164 Downloads

Fully parametric louver with V-blades; adjustable width, thikness, blade number, blade thikness, distance between blades; automatically calculated hight; textured. Please, use this model in a door panel creation (generic model).

Product Version: Revit Architecture 2012

6469 Downloads

Nested SL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

1231 Downloads

The new SURVIVOR® 9 offers water, impact, and vandal-resistant solutions for the most demanding applications. A versatile, unobtrusive fixture for a wide range of surface or pendant mount interior or exterior applications. SURVIVOR® 9 fixtures are fully gasketed (IP66 rated) and feature captive hardware and a hinged door with a polycarbonate prismatic satine lens. A sleek and shallow fixture (only 2 3/8" deep), Survivor is compliant with the Americans with Disabilities Act (ADA). Survivor can be specified in 2, 3, and 4 foot lengths and operated with a choice of T8, T5, and T5HO lamps. Survivor® 9 offers the specifier a vandal and abuse resistant fixture that is suitable aesthetically for mounting conditions in university lobbies, corporate applications, school corridors, pedestrian bridges, overpasses, and parking garages. Contact Selux with your project's requirements.

Product Version: Revit Architecture 2010

3629 Downloads

Nested SL window having 1 frame of 2 bay  & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

1642 Downloads

The new SURVIVOR® 9 offers water, impact, and vandal-resistant solutions for the most demanding applications. A versatile, unobtrusive fixture for a wide range of surface or pendant mount interior or exterior applications. SURVIVOR® 9 fixtures are fully gasketed (IP66 rated) and feature captive hardware and a hinged door with a polycarbonate prismatic satine lens. A sleek and shallow fixture (only 2 3/8" deep), Survivor is compliant with the Americans with Disabilities Act (ADA). Survivor can be specified in 2, 3, and 4 foot lengths and operated with a choice of T8, T5, and T5HO lamps. Survivor® 9 offers the specifier a vandal and abuse resistant fixture that is suitable aesthetically for mounting conditions in university lobbies, corporate applications, school corridors, pedestrian bridges, overpasses, and parking garages. Contact Selux with your project's requirements.

No Rating

Product Version: Revit Architecture 2010

7227 Downloads

Nested DL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins, Security Grills can be adjusted on/off etc.  etc. Lallan Ji Upadhyay.

No Rating

Product Version: Revit Architecture 2015

1607 Downloads

Nested DL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins, Security Grills can be adjusted on/off etc.  etc. Lallan Ji Upadhyay

No Rating

Product Version: Revit Architecture 2015

1551 Downloads

The Brookfield 60", double sink, Antique Black vanity by James Martin Furniture features hand-carved accenting filigrees and raised panel doors. Two doors, on either side, open to shelves for storage below and three center drawers, made up of a lower double-height drawer and both middle and top standard drawers, offer additional storage space. The look is completed with Antique Brass finish door and drawer pulls. Each cabinet is configured to work with our variety of either 2cm, 3cm, or a 4 cm countertops. The matching decorative wood backsplash is included.

No Rating

Product Version: Revit Architecture 2020

6426 Downloads

Vektor luminaires offer a symbiosis of design integrity with time-tested simplicity. Stainless-steel, aerodynamic shape is the perfect complement for many urban and corporate streetscapes and plazas. Available in two sizes for H.I.D. lamping from 50W to 400W. Standard with stainless steel fasteners and a sealed optic system behind a tempered glass lens, Vektor luminaires are made to endure the tests of time. Tool-less stainless steel door provides for easy maintenance.Choice of many pole options, mounting arm configurations including wall mount option. Vektor luminaires provide IDA-certified "Dark Sky Friendly" Full Cutoff performance and are available in Type II, Type III and Type V distributions. Selux application engineering can provide detailed layout drawings and calculations for your next installation.

No Rating

Product Version: Revit Architecture 2010

3774 Downloads

Vektor luminaires offer a symbiosis of design integrity with time-tested simplicity. Stainless-steel, aerodynamic shape is the perfect complement for many urban and corporate streetscapes and plazas. Available in two sizes for H.I.D. lamping from 50W to 400W. Standard with stainless steel fasteners and a sealed optic system behind a tempered glass lens, Vektor luminaires are made to endure the tests of time. Tool-less stainless steel door provides for easy maintenance.Choice of many pole options, mounting arm configurations including wall mount option. Vektor luminaires provide IDA-certified "Dark Sky Friendly" Full Cutoff performance and are available in Type II, Type III and Type V distributions. Selux application engineering can provide detailed layout drawings and calculations for your next installation.

No Rating

Product Version: Revit Architecture 2010

1773 Downloads

Nested 3SL window having 1 frame of 3 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

543 Downloads

Nested SL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins, Security Grills can be adjusted on/off etc.  etc. Shared Param files attached  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

635 Downloads

Nested 1DL1SL window having 1 frame of 2 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

737 Downloads

Nested SL window having 1 frame of 2 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

Product Version: Revit Architecture 2015

1087 Downloads

Nested 1DL1SL window having 1 frame of 2 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

899 Downloads

Nested 2DL window having 1 frame of 2 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

936 Downloads

AGRV_Door_GlassSlidingX_多門落地窗門

Metric Glass X Piece Sliding door with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

521 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 9 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 9 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 9 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/9-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

227 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 8 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 8 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 8 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/8-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

163 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 4 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 4 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 4 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/8-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

127 Downloads

Nested 1DL1SL window having 1 frame of 2 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

885 Downloads

Ferrari F-40

Features 3 parametrical functions “Handle & Tires movement”, “Opening & Closing the Door”, “Shifting Gears”. Made by Revit(2010-2011).

Product Version: Revit Architecture 2011

5009 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 18 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 18 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 18 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/18-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

178 Downloads

The Corral bollard offers landscape designers and urban specifiers an exciting bollard design to integrate with existing architectural forms and locales. A classic bollard shape combined with the distinctive “corral” rings and precision workmanship exude an air of confidence and reassurance. A thick-walled column of extruded aluminum fitted with a die-cast, aluminum cover gives the luminaire an overall smooth, crisp form. Available for use with HID sources up to 70Watt, or with triple tube, four-pin, compact fluorescent lamps up to 42 Watt. The Corral bollard is constructed for long-term durability with impact resistant diffuser behind protective die-cast aluminum rings, vandal resistant fasteners, and internal direct bolt anchoring system accessible through a 5" x 6" vandal resistant access door. This fixture is ideal for high traffic locations such as schoolyards, hospitals, stadiums, parks and pedestrian malls. Can be used in conjunction with the Corral Column to give varied illumination possibilities from complementary luminaires.

Product Version: Revit Architecture 2010

38750 Downloads

May 01   2010

NZ local content of a Pioneer Manufacturing Ltd proprietary solid fuel burner  (20kw output) with optional wetback module ( not included).

This family has Yes/No parameters for the upper ECO flue base kit,  the 3 lower flue sections - 150 mm, 200 mm, 250 mm  and Yes/No parameter for the optional Floor Protector sheet including width and length parameters for the protector sheet.

The flue sections are instance parameters for height so have grips for on the fly / interactive height adjustment. The upper ECO flue base kit (nested family) has type parameters for some length sections while some are deliberately fixed segments.

Some sub categories assigned for various flue sections.

Materials parameters are assigned for inner flue, fascia panel, louvre blades, glass inset panel, door handle shaft and knob.

There is some information current at this date included in the family such as URL , NZ Keynotes (the CBI system/format and the like. The family is a wall hosted family and has the manufacturer recommended installation clearances from firebox to wall built into the family.

As usual, use at own risk- enjoy

Product Version: Revit Architecture 2011

3776 Downloads

Download: http://bimobject.com/en/supa-doors/product/glass_doors_5-panel 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

All doors are solid stile and rail construction that are all Built To Order, allowing for customization on the fly and are available in any standard heights up to 8’0” tall and 3’6” wide (larger doors available upon request). Stile and rail dimensions may be adjusted without affecting the pricing, including multiple sticking profiles and panel options. Door Thicknesses include 1-3/8", 1-3/4" and 2-1/4". ALL Panel doors may be fire rated in 20 minutes, 45 minutes, 60 minutes, and 90 minutes with concealed closer options. SUPA Doors proudly carry a limited Lifetime Warranty and are STC sound rated to minimize noise (STC 32-45). Doors can qualify toward multiple LEED credits and are manufactured in the USA. Clear, Frosted, and Specialty Glass may be substituted for all panels, and all doors can include prehung wood jambs if desired. Matching stain grade veneer doors available in addition to the standard MDF doors. Please see catalogue for details.

No Rating

Product Version: Unknown

13211 Downloads

PARK SINGLE POLE H=3500mm

Art. S.7100N20 MODULES LED 4000K  220-240Vac 6000lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 4308lmRated input power: 46WLuminaire efficacy: 94lm/WElectronic ballast  ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 65MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp  fixed position . LOR -- POLERectangular extruded aluminum pole with inspection door. Steel zinc-plated mounting flange with stainless steel screws.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H07RNF cable. Single cable entry with PG13,5 (Ø 6÷12 mm) cable gland in PMMA. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 36.01 Kg Glow Wire test: -- Exposed windage area : 0,394 m² ( S.7100N ) Exposed windage area : 0,440 m² ( S.7110N )LED circuit included.PARK REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

711 Downloads

Contents:

Cabinet with  doors

• Dimensions are parametric, depth, height, width, handle placement


• Materials: cabinet, door, handle

Cabinets Drawers

• up to five drawers with visibility


• dimensions are parametric; depth, height, width, drawer height


• drawers automatically drop down 5 mm under the above drawer this is fixed at the moment a new version might get this dynamic.


• Materials are parametric

Plinth

• Parametric dimensions (instance) material parameter.

Worktop L shape (with/without sink)

• Lengths, depths, heights, and thickness all instance parametric

Worktop I shape (with/without sink) Lengths, depths, heights, and thickness all instance parametric

Misc parts face based

1. Stove electric: fixed dimensions, parametric materials (4 or 5 cooking pits with visibility parameter)


2. coffee machine based upon Phillips Coffee pad machine: fixed dimensions, parametric materials


3. coffee mug: fixed dimensions, parametric materials


4. Microwave; fixed dimensions, parametric materials


5. faucet: fixed dimensions, parametric materials based upon an old Sphinx one

Misc generic model

1. Sink: parametric (instance) dimensions and height based upon floor height.

For any qeustions, 'bugs' etc. contact me by personal message

disclaimer: first family, some stuff might seem odd but strangely it works, next version will probably tone down on the parameters a bit.

Notice: Everything under constraints is calculated and should be left alone.

standard sizes based upon measurements from the netherlands, but can be adjusted to match your own.

Need another Revit version? Sadly Revit doesn't support saving back to previous versions. I can, however, create an IFC which can be imported. This might break the information contained within. Rendering the model useless. I'm sorry for this.

No Rating

Product Version: Revit Architecture 2016

3155 Downloads