 |
MASS truAIR Drying Cabinet Storage and Protection for 18 flexible endoscopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying with 6LPM per scope. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Scope Hooks: stores 18 flexible endoscopes
Reusuable Drying Connectors: including Auxiliary Water
Padded Lower Wall: distal tip protection
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Air Manifold: quick disconnect for 18 connectors
Removable Drip Tray
Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
http://www.massmedicalstorage.com/endoscopy-storage/18-scope-hepa-grade-drying-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
545 Downloads
|
|
 |
This is the finished Facility Occupancy Load Schedule and Egress Plan. This is automated to calculate the occupant load based on the type of area then use that to calculate occupant load.
There are 2 tags. 1 for rooms, 1 for egress doors.
There are 4 schedules
1. DOOR EGRESS SCHEDULE
2. FACILITY OCCUPANCY SCHEDULE
3. ROOM OCCUPANCY COMPARE SCHEDULE
4. SPACE OCCUPANCY CLASSIFICATION
There is one sample Model.
Steps:
1. Copy the schedules and tags to your current project.
2. Open the Room occupancy compare schedule
3. Select what type of area you see fit.
4. Type in 0 sf for “NON CALCULATED ROOM AREA” to calculate occupants
5. Manually type in tag value to match calculation to populate the room tag.
6. Place the facility schedule on the code plan sheet.
7. Place the Door egress schedule on the sheet too.
8. Place all your room tags
9. Place your egress door tags on 1 exit way door only per egress area
10. Make a note of how you want to number your egress areas. ( I usually go clockwise from upper left to lower right)
11. Fill in the Egress area for each room in the properties field. ( You can multiple select rooms at the same time and type in the value for all at once, use your filter)
12. The Facility Schedule will populate.
13. Type in the Occupant value to the Door egress schedule. Make sure they match. Hide Door egress schedule.
You’re done. Or pretty close J #JustinDesigns3D JustinDesigns3D@Gmail.com |
|
Product Version: Unknown
4005 Downloads
|
|
|
 |
Here are two Viewports:
1. Viewport Std. - with following Type Parameters:
a. Title – View Title.
b. Show Title – Yes.
c. Show Extension Line – Box checked.
2. Viewport W/ Box - with following Type Parameters:
a. Title – View Title- Detail Box.
b. Show Title – Yes.
c. Show Extension Line – Box not checked.
Place Detail Boxes: using place a drafting view as the example.
1. Load the View Title-Detail Box and Detail Box into a project.
2. Create a drafting view “DOOR FRAME” for example and drag onto a sheet.
3. Click that detail, in the Properties window, click the down arrow on the right, two Viewport types will be shown. Click “Viewport W/ Box”. Double click the detail to activate that View, on the bottom of the option bar selecting the proper scale.
4. Now placing the Detail Box, in the Project Browser, under “Family”/ “Annotation Symbols”, click “Detail Box” and expand the family types, select 3x3 for example, drag and place it to the right location on the sheet using the grid marks on the border or the invisible grids on the sheet, then drag the “DOOR FRAME” detail into the detail box, then drag the detail title to the correct location.
5. If the detail box type for example 8x10 is not on the list, you can select any type such as 3x3, click it then in “Type Properties” using “Duplicate” to create the new type “8 X 10”, then in the “Type Parameter”, “Other”, in the Row X, click 3, then an up/down arrow will be shown on the right, using it to change to 8, then do the same for the Y, now you have the Type 8 X 10.
Sorry, haven't upload for a while. The site said that I can upload 10 files maximum, I had upload only two of three, the image file and the empty box family, and don't know why the View Title didn't upload.I tried again and no avail. I have to create another new upload for the View Title. |
No Rating |
Product Version: Revit Architecture 2015
4446 Downloads
|
|
|
 |
Filtrine Model FCC-107-14-HL fountain/chiller/purifier combination unit. Comes with a discrete and energy-saving chiller/purifier in the wall below. The chiller stores (2) gallons of chilled/purified Filtrine water (serving a population of 150). Matching key-lock, hinged access door provides chiller/purifier access and security. Architectural alternative to traditional Electric Water Cooler (EWC).
|
No Rating |
Product Version: Revit Architecture 2012
9647 Downloads
|
|
|
 |
This casework family is a model of an American Woodmark base cabinet with two doors, two drawers, and an adjustable half-depth shelf. Each door and drawer can be opened individually. The shelf moves up and down and is held in place with clips. The materials are pre-defined and assigned through casework sub-categories. The family includes the URL to open the American Woodmark catalog wherein this cabinet, with its four standard widths, can be found. |
No Rating |
Product Version: Revit Architecture 2012
7193 Downloads
|
|
|
 |
1 connected swing-out door with ONE rotating circular shelf
Image is from http://trendkitchencabinets.com/wp-content/uploads/2012/11/Menards-Kitchen-Cabinets-Unfinished-1.jpg |
|
Product Version: Revit Architecture 2013
20462 Downloads
|
|
|
 |
This American Woodmark casework family is a narrow vertical tray storage unit. It includes the tray divider and an adjustable shelf. The door opens with an instance parameter. The pre-defined materials are assigned with casework sub-categories. American Woodmark offers this cabinet in a single width, 9", but does also offer a reduced 14" depth. Both models are included as family types. The URL opens the catalog wherein you can find this cabinet. |
No Rating |
Product Version: Revit Architecture 2012
5036 Downloads
|
|
|
 |
AGRV_Door_GlassSlidingTriple_三落地窗門A
Metric Glass Triple Sliding door (TypeA) with DIM & Material parameters and dimension Guide |
No Rating |
Product Version: Revit Architecture 2018
756 Downloads
|
|
|
 |
AGRV_Door_GlassSlidingQuadrupleA_四落地窗門A
Metric Glass Quadruple Sliding door (TypeA) with DIM & Material parameters and dimension Guide |
No Rating |
Product Version: Revit Architecture 2018
1525 Downloads
|
|
|
 |
AGRV_Door_GlassSlidingTriple_三落地窗門
Metric Glass Triple Sliding door with DIM & Material parameters and dimension Guide |
No Rating |
Product Version: Revit Architecture 2018
1188 Downloads
|
|
|
 |
AGRV_Door_GlassSlidingTriple_三落地窗門
Metric Glass Triple Sliding door with DIM & Material parameters and dimension Guide |
No Rating |
Product Version: Revit Architecture 2018
671 Downloads
|
|
|
 |
AGRV_Door_GlassSlidingQuadruple_四落地窗門
Metric Glass Quadruple Sliding door with DIM & Material parameters and dimension Guide |
No Rating |
Product Version: Revit Architecture 2018
571 Downloads
|
|
|
 |
Office phone booth, measuring 41.5"W x 43.3"W x 88.8"H for use for acoustic quality and privacy in office settings.
Dimensions are not parameter controlled and are based on the ROOM brand phone booth.
Parameters control materials (the light and dark color options are included as family types), visibility of door swing in plan, and visibility of a stool I included for reference.
This model is one I created for personal use, and is not created by the ROOM company.
More info here:
https://room.com/pages/office-privacy-booths
Keywords: office phone booth privacy call conference acoustic telephone |
No Rating |
Product Version: Unknown
3635 Downloads
|
|
|
| |
Metal frame doors - detailed frames with stops. Standard 5 3/4" frame with adjustable frame depth. Can adjust setback from wall face - default 1/8". Rough openings will include frame width. Has lockset in elevation & 3D views. Door sizes 2'6", 2'8", 2'10", 3'0", & 4'0" x 7'0" - can add or adjust sizes. Default frame width 2", frame head 4" - can adjust sizes. |
No Rating |
Product Version: Revit Architecture 2010
1495 Downloads
|
|
|
 |
Download: http://swedoor-jeld-wen.bimobject.com/ext_char_pul
To get the single door version and/or other doors/sizes click the link above.
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
Character is our latest pride among the exterior doors. Its unique glass openings without strips and screws sets a new standard for design. Now you can create an entrance with a very stylish and self-expression. Door design, concealed hinges, solid construction and patented design solutions also contribute to the exclusive feel that Character conveys. |
|
Product Version: Unknown
1717 Downloads
|
|
|
 |
MASS TEE Probe Cabinets store TEE probes safely and securely. TEE probes hang freely and vertically to aid drying.
Our unique holder system helps prevent cross-contamination while protecting the transducer box.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.
Air Supply: High flow rate channel drying. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Adjustable TEE Rack: stores 4 TEE probes
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
https://www.massmedicalstorage.com/product/4-8-tee-probe-scope-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
117 Downloads
|
|
|
 |
MASS TEE Probe Cabinets store TEE probes safely and securely. TEE probes hang freely and vertically to aid drying.
Our unique holder system helps prevent cross-contamination while protecting the transducer box.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.
Air Supply: High flow rate channel drying. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Adjustable TEE Rack: stores 4 TEE probes
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
https://www.massmedicalstorage.com/product/4-8-tee-probe-scope-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
83 Downloads
|
|
|
 |
MASS TEE Probe Cabinets store TEE probes safely and securely. TEE probes hang freely and vertically to aid drying.
Our unique holder system helps prevent cross-contamination while protecting the transducer box.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.
Air Supply: High flow rate channel drying. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Adjustable TEE Rack: stores 8 TEE probes
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
https://www.massmedicalstorage.com/product/4-8-tee-probe-scope-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
238 Downloads
|
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 4 small scopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Removable Drip Tray
Small Scope Rack
Center Separator Scope Rack
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
176 Downloads
|
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 8 small scopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Removable Drip Tray
Small Scope Rack
Center Separator Scope Rack
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
224 Downloads
|
|
|
 |
A window with a fully parametric brick arch. This took quite a while to figure out, but I wanted to share it with anyone that wanted it. The brick arch is fully parametric in that it will adapt to the width, height, or arch height of the window. The number of bricks will also adapt depending on how wide/tall the window is. The window itself can be adapted as needed. Note. This arch part of the window is made to be configured by the height of the arch, not by a radius. I did this since I wanted to be able to specify a specific height for the arch to match brick coursing. And of course feel free to change the window to an opening/door/whatever. Just make sure you keep the main parameters. |
|
Product Version: Revit Architecture 2009
22276 Downloads
|
|
|
 |
I was too hesitant to upload this family without properly checking that it flexes properly. I appologize for the confusion. This is a line based kitchen cupboard family as a generic model. The cupboards can be used in a very quick way to draft 3D cupboards inside your model and have them depict somehwat correctly in sections and plan views. There are two other very similar families which I uploaded. They are similar, but do NOT flex properly if you need to convert to imperial measurments. I am pretty sure this version will be ok. I altered some of the family parameters and constraints to better array and alter the width of the door panels, no matter what length the cupboard is. With the tweaking and fixing, this family can also be used as line based wardrobes. I included a wardrobe type within the family. I hope the owners of this site could implement a "replace" function for uploaders to better serve those downloading! |
|
Product Version: Revit Architecture 2015
7528 Downloads
|
|
|
 |
Lazy Susan with 1 connected swing out door and TWO rotating shelves
Image is from http://trendkitchencabinets.com/wp-content/uploads/2012/11/Menards-Kitchen-Cabinets-Unfinished-1.jpg
|
|
Product Version: Revit Architecture 2013
16322 Downloads
|
|
|
 |
Ianjunker inspired me to recreate his corner cabinet based on one I had in a previous residence which I liked. Essentially it is the same with the main difference being the door is attached to the shelving. By rebuilding it from scratch I learned a lot of the nuances of Revit trying to get all the parameters to work. Enjoy!
Thanks again to Ianjunker for this model: https://www.revitcity.com/downloads.php?action=view&object_id=14822 |
|
Product Version: Revit Architecture 2020
1441 Downloads
|
|
|
 |
Contains 10, 20 & 40 Foot variations with High Cude variations as well.
This version has been fixed to ensure the Height takes into account the roof thickness. I've used a parametric workaround for that rather than re model the whole thing - since the original height setting was created by someone else
Param for door Visibility settings of components with additional Course View and plan view settings to help create clearer graphics. Metric Units. Rationalise Material naming & asset
NOTE: Visibility of roof set to show in Coarse view so that it can been seen in site-plan type views set to turn off in other views to ensure internal volume can be seen. |
|
Product Version: Revit Architecture 2014
14914 Downloads
|
|
|
 |
Nested SL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Multi lite panel can be 1V x1H to 5V x 3H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. etc. etc. Lallan Ji
Most params are shared Params |
|
Product Version: Revit Architecture 2013
1248 Downloads
|
|
|
 |
Nested DL window having 1 frames & 1 ML door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Multi lite panel can be 1V x1H to 5V x 3H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. etc. etc. Lallan Ji
Most params are shared Params |
|
Product Version: Revit Architecture 2013
2674 Downloads
|
|
|
 |
Revit 2022
Door family with varrying panels of that style which can be switched with a family type parameter.
Parameters include:
- Width
- Height
- Frame Thickness
- Thickness (door)
- Center Rail Height
- Top Rail Width
- Center Rail width
- Side rail width
- Bottom Rail Width
- Trim Width
- Trim Thickness
- Handle Height
- Handle Inset
- New (instance)
- Existing (instance)
- Undercut (instance)
- Deadbolt On/Off (instance) |
No Rating |
Product Version: Unknown
311 Downloads
|
|
|
 |
A Christmas present for my Animal Research Facility and Laboratory Facility architect friends.
Metal Guardrail (4" standard height, but can be adjusted). Three types:
1 1/2" projection
3" projection (most used in real life)
6" projection
Adjustable parameters include: Length, Height above floor, Bracket Spacing, Visibility of 'in' and 'out' brackets for dealing with inside and outside wall corners. For very short walls choose very short bracket spacing (I recommend making yourself a simpler version).
Context image also shows the Broom Stow (previously uploaded). Masonry wall stack bond pattern and a hollow metal door and frame with lite and louver help to make for a realistic image. |
No Rating |
Product Version: Revit Architecture 2017
841 Downloads
|
|
|
 |
Ferrari F-40 Features 3 parametrical functions “Handle & Tires movement”, “Opening & Closing the Door”, “Shifting Gears”. Made by Revit(2010-2011). |
|
Product Version: Revit Architecture 2011
23597 Downloads
|
|
|
Search