This is a standard design for R.R.Dry Stone masonary Retaining wall to support the hill roads. As normally the maximum length of hill roads are supported by these dry walls which do not use any mortar for masonary, to control the cost. Filling behind the wall has also modelled for explaining purpose, which may be removed.

No Rating

Product Version: Revit Architecture 2018

265 Downloads

Series CA-421 floor mounted plate type lavatory or water cooler carrier with heavy gauge steel uprights with integral welded feet, universal steel hanger support plate, and plated hardware.

No Rating

Product Version: Revit MEP 2014

156 Downloads

Parametric Water Tank on 2 side support mostly constructed on mumty roof. Internal size, wall thickness, floor & tank roof thickness, materials can be set manually. Tank can be raised above the roof. Manhole covers not provided . Lallan Ji, Varanasi

No Rating

Product Version: Revit Architecture 2015

511 Downloads

Cow Tongue Wall Scupper Outlet - based on a 3" pipe diameter.  This family has an instance parameter called "Wall Offset", which allows for adjustments for walls with a thicker base than upper portion.  Initial placement is to the exterior face of wall.  Once placed, adjust the wall offset parameter to bring it out to the finished face of stacked walls.

Product Version: Revit Architecture 2014

3550 Downloads

Cow Tongue Wall Scupper Outlet - based on a 6" pipe diameter.  This family has an instance parameter called "Wall Offset", which allows for adjustments for walls with a thicker base than upper portion.  Initial placement is to the exterior face of wall.  Once placed, adjust the wall offset parameter to bring it out to the finished face of stacked walls.

Product Version: Revit Architecture 2014

4146 Downloads

MIFAB® Series MI-QXHUB (specify size) heavy duty shielded no hub couplings are manufactured with gaskets made from neoprene and three sealing rings (meets the requirements of ASTM C564) housed inside a Type 304 stainless steel corrugated shield. Four (2” through 4” size), six (5” through 12” size) Type 304 stainless steel clamps tightened with 3/8” Type 305 stainless steel hex head screws surround the shield to provide the sealing force.

MI-QXHUB Series Couplings are tested and certified to the ASTM-C1540 and CSA B602 Standards. The MI-QXHUB are also tested and certified by Intertek Testing Services to the CAN/ULC S102.2 “Smoke Test”. The MI-QXHUB are tested and certified by IAPMO to comply to the FM1680 Standard (except for markings). Patented Pipe Clamp for joining all types of pipe.

No Rating

Product Version: Unknown

37 Downloads

Series CA-321 epoxy coated floor mounted urinal carrier with heavy gauge steel offset uprights with welded feet, universal steel hanger support plate and bottom bearing plate with integral mounting brackets, and plated hardware.

No Rating

Product Version: Revit MEP 2014

161 Downloads

The Emily Two Seater Sofa provides a crisp clean design whilst still provide excellent levels of comfort and support for users making it ideal for care homes, nursing homes, hospices and housing associations. Some of the key benefits include removable seat cushion for easy cleaning and reversible cushions reduce fabric wear. Padded arms and wings offer additional comfort and is Ergonomically designed to aid good posture.

(Created in Revit 2014)

Product Version: Unknown

17102 Downloads

Stool generally used for the education market. Can be used as an art stool or in science. Plastic seat with a pleasing aesthetic using holes punched through. Seat has a small lip at the back for additional support. Sits on a steel sled frame. Manufactured by Hille Educational Products

No Rating

Product Version: Revit Architecture 2013

3114 Downloads

Dryer-Ells are ten inch radius, smooth interior elbows that reclaim allowable duct length. Based on ASHRAE methodology for calculating friction loss, they can be measured the same as straight pipe. This removes the run length penalty most code requires for every elbow.

https://dryer-ell.com/introducing-dryer-ell-model-lt90

No Rating

Product Version: Unknown

575 Downloads

Dryer-Ells are ten inch radius, smooth interior elbows that reclaim allowable duct length. Based on ASHRAE methodology for calculating friction loss, they can be measured the same as straight pipe. This removes the run length penalty most code requires for every elbow.

https://dryer-ell.com/introducing-dryer-ell-model-lt45

No Rating

Product Version: Unknown

364 Downloads

Working with this family:

-Change type to go from Single to Double sided.

-Use the "Right/Left Handed" yes/no toggles to change direction of the flow of pipe.

-In order to have a double wye connection style - Have *both* the "Right/Left Handed" as well as the "Double Sided - Right/Left" toggle on. (Any questions with this feel free to post comments, and i will be happy to answer.)

-Use the "Center of Connection Point & Stand Notches" for the elevation.

*Note* - Available elevation adjustment is: 4.25" - 9.75"

No Rating

Product Version: Revit MEP 2015

867 Downloads

The 90 Series Heavy Duty Return Gym Grille features a fully welded border and mandrel tubes that support the blades to prevent damage, making them ideal for heavy duty applications. Available in both steel and aluminum construction with multiple core styles and mounting options, the 90 Series can be customized to suit each application.

No Rating

Product Version: Revit MEP 2020

114 Downloads

Ropatec - Big Star - Wind turbine on custom post support. http://www.ropatec.com/ing_big_star_vertical.php?lin=3

Fin rotor diameter 26 feet (8m)

Overall height: 52 feet (16m)

Nominal power: 20 KVA

Product Version: Revit Architecture 2010

6343 Downloads

Henley has specifically Designed arms to aid easy rising. With a timber trim to back which reduces fabric wear. Available in Natural Beech, Bleached Beech, Oak, Cherry, Walnut and Wenge stains as standard, plus customers own stains. Available in our large range of standard fabrics or client specified.

Hygiene gap prevents trapping of dirt and bacteria between the seat and back with stretcher rails to provide added strength.Supportive high back provides extra support.

(Created in Revit 2014)

Product Version: Unknown

3761 Downloads

This is a straight stage curtain, opened to both sides. The height of the curtain, support rod, and wall opening are all adjustable. Depending on your particular conditions, it may require expanding the size of the curtains on either side. This will require a copy and paste of curtain (the curtain is in two pieces on each side already). Then use the join tool to join as many pieces as you need. Join the two sides separately to retain functionality. Do not group pieces - you will lose functionality.

Product Version: Unknown

29691 Downloads

MIFAB Series C1440-S (select model number with required plug pipe size) expandable line cleanout plug with tapping and 7” x 7” square, smooth nickel bronze access panel with allen key screws and anchor frame with mounting lugs.

No Rating

Product Version: Unknown

72 Downloads

MIFAB Series C1450-S (select model number with required plug pipe size) line cleanout plug with blind tapping and 7” x 7” square, smooth nickel bronze access panel with allen key screws and anchor frame with mounting lugs.

No Rating

Product Version: Unknown

96 Downloads

Series 957, 957N, 957Z Reduced Pressure Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a potential health hazard. Compact design and lightweight stainless steel construction (70% lighter than traditional designs) makes installation easier and faster. Groove connections also ease installation and pipe alignment. A variety of shutoff valve options are available.

No Rating

Product Version: Revit MEP 2014

792 Downloads

To make it parametric. Please clcik the link.

Please support my Youtube Channel, if this family is helpful. >>>https://www.youtube.com/watch?v=kho5o7nAMaY&list=PLFtpZGWL7M_I3mMBN7lTFsat-CQF8Uh8X&index=4

No Rating

Product Version: Unknown

750 Downloads

Dimensions of the night stand can be changed:

Minimum Width: 1'Maximum Width: 5'

Minimum Depth: 1'Maximum Depth: 5'

Minimum Height: 1' 6"Maximum Height: 4'

Drawer height and legs thickness can also be changed:

Minimum Drawer Height: 5"Maximum Drawer Height: (Height/1'9")*6"

Minimum Leg Thickness: 3/4"Maximum Leg Thickness: 0' 1 1/2"

Materials parameters for:

DrawerHandleLegs and Support

Furniture Family

Product Version: Revit Architecture 2016

3338 Downloads

The vertical bowl outlet consists of a bowl that cumulates the water before it flows down into the pipe system of the building via vertical pipes of standard diametres from ø50 to ø110 mm.Bowl outlets are made from stainless steel and can be delivered with integrated bitumen or foil membrane.

No Rating

Product Version: Revit Architecture 2019

134 Downloads

Gallus 2000-NG4 Gas Meter for utlity reticulation at property boundary

Wall hosted,               Category Speciality Equipment

White painted metal sheet cover with On/Off control

Adjustable length gas supply pipe (instance parameter), adjustable position on wall for unit.

Plan View only shows Gas  meter icon graphic.

Gas label has distance from wall control to suit different view scales / personal prefs.

Materials partly assigned so User needs to check mats before render otherwise shaded views set up.

Product Version: Revit Architecture 2013

6429 Downloads

Parametric total height and board height.

Want to see the making of this family? https://www.youtube.com/watch?v=m8SOZvfUqQM&t=5s

Feel free to use this family for personal or commercial uses.

Support is appreciated: https://www.patreon.com/user?u=4579022

No Rating

Product Version: Revit Architecture 2016

1903 Downloads

The vertical bowl outlet consists of a bowl that cumulates the water before it flows down into the pipe system of the building via vertical pipes of standard diametres from ø50 to ø110 mm.Bowl outlets are made from stainless steel and can be delivered with integrated bitumen or foil membrane.

No Rating

Product Version: Revit Architecture 2019

130 Downloads

Series 757 Double Check Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a non-health hazard. Compact design and lightweight stainless steel construction (70% lighter than traditional designs) makes installation easier and faster. For unmatched versatility, assemblies are available for horizontal, vertical, or N pattern installations while groove connections allow ease of installation and pipe alignment. Patented tri-link check assemblies are also designed for easy serviceability. A variety of shutoff valve options are offered.

No Rating

Product Version: Revit MEP 2014

831 Downloads

MIFAB® Series MC-41D floor mounted back to back concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware. 

No Rating

Product Version: Unknown

43 Downloads

MIFAB® Series MC-41D floor mounted back to back concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware. 

No Rating

Product Version: Unknown

21 Downloads

MIFAB® Series MC-41D floor mounted back to back concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware. 

No Rating

Product Version: Unknown

16 Downloads

Festivus Pole:

Product Version: Revit MEP 2012

692 Downloads