Coalesse - Emu

The Cross collection is a collection of statuesque and meticulous design that plays on a refined combination of materials: metals to form the shapes, cushions to give them softness and aluminum to support the structures.

COALESSE

Product Version: Revit Architecture 2009

3949 Downloads

Coalesse - Emu

The Cross collection is a collection of statuesque and meticulous design that plays on a refined combination of materials: metals to form the shapes, cushions to give them softness and aluminum to support the structures

COALESSE

Product Version: Revit Architecture 2009

2169 Downloads

Coalesse - Emu

The Cross collection is a collection of statuesque and meticulous design that plays on a refined combination of materials: metals to form the shapes, cushions to give them softness and aluminum to support the structures

COALESSE

Product Version: Revit Architecture 2009

1903 Downloads

Two metal wall mounted shelves. You can change the width, depth and space between them. You can also change how far the supports extend down and up. 

REVIT 2016 (not 2015)

Be aware that the elevation constraint measures from the bottom of the wall support, not the first shelf, so you might have to do some math. 

Product Version: Revit MEP 2015

14776 Downloads

AGRV-HRAL_SeriesC-Parapet-Metal & Glass Railing

# Parapet(Short wall) mounted railing

# rail support

We proivde 2 type of Railing in RVT : H120,H150

We also create a Baluster using the railing support familt, so you can place it manully.

Visit our website AgrvArchitect.com for more families

No Rating

Product Version: Revit Architecture 2018

913 Downloads

Fully parametric square concrete footing with square pier support and column straps.

Familt Category is 'Structural Columns' rather than 'Structural Footings' because when attaching a column to it, the column would attch to the top of the strap elevation rather than the pier bearing surface if categorized as a footing...

Product Version: Revit Architecture 2014

5414 Downloads

Sectional overhead door with dock seal and 2 pipe guards

Product Version: Revit Architecture 2008

9887 Downloads

Sectional overhead dock door with shelter and 2 pipe guards

No Rating

Product Version: Revit Architecture 2008

3711 Downloads

Rain water tank sits beneath topography with a slight rise above the surface for access and 4 connections at the base. I deal for use on small blocks to maximise space.

W 2440 x L 3780 x H 1270

Material (design is meant to be Poly), Length and width adjustable parameters and i have added pipe connections however i am not HVAC so others may be able to improve on the realistic fitting diameter sizing.

No Rating

Product Version: Revit Architecture 2015

3554 Downloads

User controls: base width, top width, concrete structural support center width, top cap width, top cap thickness, column height, cap on/off.

 I did not include a stone hatch.  That you'll have to put in.

No Rating

Product Version: Unknown

6267 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

Product Version: Revit Architecture 2019

73 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

27 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

22 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

18 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

16 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

24 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

20 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

16 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

32 Downloads

Model of SMEG's retro 50's refrigerator.  Model #FAB32ULOR3.

Non parametric.  Materials can be set for the body pieces combined, the logo and handles combined, and the support feet.

I made this for my wife who is and interior design student.  I hope it helps some others out there.

No Rating

Product Version: Revit Architecture 2017

5466 Downloads

Series FS-800 epoxy coated cast iron sanitary can wash drain with secured nickel bronze grate, stainless steel sediment bucket, spray nozzle assembly with 1/2 in. (13mm) NPT pipe connection, and 4 in. (102mm) no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

272 Downloads

To make it parametric. Please click the link.

Please support my Youtube Channel, if the family is helpful.>>>>https://www.youtube.com/watch?v=rTMxFs6_s3g

No Rating

Product Version: Unknown

529 Downloads

The design of JUAL angular roof outlet is similar to the vertical roof outlet, but the pipe has a 92° angle immediately after the intlet so water is drained horizontally from the roof. The angular roof outlet can be supplied in all standard diametres from 50 mm to 110 mm with various roof membrane types.

No Rating

Product Version: Revit Architecture 2019

223 Downloads

AGRV-HRAL_SeriesD-Metal & Glass Railing# floor mounted railing# talon supportWe proivde 2 type of Railing in RVT : H120,H150We also create a Baluster using the railing support familt, so you can place it manullyVisit our website AgrvArchitect.com for more families

Product Version: Revit Architecture 2018

3099 Downloads

Series CA-431-1 floor mounted bi-level water cooler carrier with heavy gauge steel uprights with integral welded feet, universal steel hanger support plate, and plated hardware.

No Rating

Product Version: Revit MEP 2014

179 Downloads

Parametric Pendant Lighting (Exposed Bulb).  Not ceiling mounted so heights can be fully adjustable.

WARNING: I accidentally made type parameters instead of instance parameters so it could be a problem if you want to individually adjust settings of multiple instances. However, if you don't mind all fixtures changing at the same time, you are good to go.

Parameters: Bulb height (keep at 0'-0" at all times) / Cord Length / Support (Rail) height, Rod Length, Materials

Light sources are nested as separate bulbs

Product Version: Revit Architecture 2015

8321 Downloads

Series CA-311 epoxy coated floor mounted urinal carrier with heavy gauge steel offset uprights with welded feet, universal steel hanger support plate with integral mounting brackets, and plated hardware.

No Rating

Product Version: Revit MEP 2014

196 Downloads

The design of JUAL angular roof outlet is similar to the vertical roof outlet, but the pipe has a 92° angle immediately after the intlet so water is drained horizontally from the roof. The angular roof outlet can be supplied in all standard diametres from 50 mm to 110 mm with various roof membrane types.

No Rating

Product Version: Revit Architecture 2019

122 Downloads

The design of JUAL angular roof outlet is similar to the vertical roof outlet, but the pipe has a 92° angle immediately after the intlet so water is drained horizontally from the roof. The angular roof outlet can be supplied in all standard diametres from 50 mm to 110 mm with various roof membrane types.

No Rating

Product Version: Revit Architecture 2019

253 Downloads

Fully parametric canopy system based on the Mitchell Metals canopy system.  Allows you to drag it to the correct size and places the supports as required and recommended by the manufacturer.  The width/height is controlled to correspond to the manufacturer's maximum recommended dimensions. 

The parameters are shared between the support and the canopy system, you will most likely need to create the shared parameters in your own project or use the attached file.

No Rating

Product Version: Revit Architecture 2011

4932 Downloads