 |
Parametric circular hand rail - Generic face based family
rail length and face offset instance parameter / rail support type parameter |
|
Product Version: Revit Architecture 2015
2651 Downloads
|
|
 |
Curvilinear Reception Desk in the shape of a Water Wave
Elevated Glass Counter Top, Blue Counter with Mulit-Level Recessed Voids + Curved Base Support
Visit my website at http://www.4u2cdesign.com
|
|
Product Version: Revit Architecture 2010
35703 Downloads
|
|
|
 |
Afternoon Peeps.
Its been a few weeks since my last upload so i thought i'd treat you all.
For you today is a nice simple, but yet modern desk chair fit for either residential office or commercial office.
Fixed in size but i'e given the chair 4 material parameters. The main seat, the back support, the frame and the arm rests. So you can change them to suit your needs.
Hope it comes in useful
Enjoy |
|
Product Version: Revit MEP 2014
15515 Downloads
|
|
|
 |
Morning guys, heres a quick Modern Glass dining table.
This is parametric in length and width, and has 3 materials families, 2 glass and the steel feet/main support.
Hope you guys like it and it comes in useful for you on your projects.
Have a good week |
|
Product Version: Revit MEP 2014
10045 Downloads
|
|
|
 |
MIFAB® Series MC-10-HDX, 1000 lb. Carrier Support complies with all applicable requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) load.
This support is used in concert with the standard lacquered cast iron adjustable faceplate, lacquered cast iron waste fitting, adjustable ABS nipple, hardware and finishing kit. |
No Rating |
Product Version: Unknown
62 Downloads
|
|
|
 |
Completely parametric awning family, with nested arrayed support brackets. You choose the maximum bracket spacing and the length, and the number of brackets required is calculated. Includes material paremeters for the frame and the awning materal (such as canvas, metal, etc.), and options for open or closed ends. |
|
Product Version: Revit Architecture 2009
25854 Downloads
|
|
|
 |
Floor trough based on Advance Tabco Floor Troughs. Width and Lengh fully parametric with one 4" drain. Consult Manuf. for sizes. Stainless Steel grate. 3D fine and 2D medium and coarse representaion, 4" SS pipe connector. |
|
Product Version: Revit MEP 2010
7557 Downloads
|
|
|
 |
The bypass isolation switch is designed for applications where maintenance, inspection and testing must be performed while maintaining continuous power to the load. This is typically required in critical life support systems and standby power situations calling for safe system maintenance with no power disruptions. |
No Rating |
Product Version: Unknown
2410 Downloads
|
|
|
 |
Modern DVD Tower - Curved Vertical Panels stack up to form this center tri-core assembly. Blue DVD Panel, Black Vertical Supports and Aluminum Circular Base w/ Vertical Rod for Support.
Visit my website at http://www.4u2cdesign.com
|
No Rating |
Product Version: Revit Architecture 2010
3046 Downloads
|
|
|
 |
Fully parametric diesel day storage tank on a leg support.
Default size is (2000x2000x1200)mm (WxDxH)
Minimum Size supported is (600x600x600)mm (WxDxH) |
No Rating |
Product Version: Revit MEP 2020
215 Downloads
|
|
|
 |
Red-Blue Chair by Rietveld |
|
Product Version: Unknown
2753 Downloads
|
|
|
 |
This is a generic model of half of a Modillion from the Corinthian order. Two mirror versions of this model adorn the modillion coursing in the bed-moulding of the Corinthian entablature. This bracket supports the eaves (sometimes coffered) and variants of this decoration also support archways (usually topped by an impost block) and consoles. |
|
Product Version: Revit Architecture 2018
2906 Downloads
|
|
|
 |
Elkay PRK Series Sink based off Manufactures DWG drawings and PDF specs. 100% Revit with pipe connectors. No AutoCAD information in Family!
|
No Rating |
Product Version: Revit MEP 2011
6227 Downloads
|
|
|
 |
Visibility Parameter For :
1) Hatch
2)Round Supports
3)Landing Curverd Support
--------------------------------------------
Parameters:
Height
Width
Landing wall Width & Height
All materials
Fixation Distance From Wall = offset ( accepts Negative values)
For Changing Spacing between Risers or Fixation mess with the equations ;)
Any upgrades needed for the family just tell so i may be able to adjust |
No Rating |
Product Version: Unknown
3398 Downloads
|
|
|
 |
The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet. |
No Rating |
Product Version: Revit Architecture 2019
274 Downloads
|
|
|
 |
Wall-Mounted Clothing Rod and Bracket. Height and width is adjustable. With Top Shelf and intermediate support. |
|
Product Version: Unknown
7465 Downloads
|
|
|
 |
The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet. |
No Rating |
Product Version: Revit Architecture 2019
145 Downloads
|
|
|
 |
Floor trough based on Advance Tabco Floor Troughs. Standard Width and Lengh with two 4" drain outlets. Consult Manuf. for sizes. Stainless Steel grate. 3D fine and 2D medium and coarse representaion, 4" SS pipe connectors. |
|
Product Version: Revit MEP 2010
6176 Downloads
|
|
|
 |
Coalesse - Emu The Cross collection is a collection of statuesque and meticulous design that plays on a refined combination of materials: metals to form the shapes, cushions to give them softness and aluminum to support the structures COALESSE |
|
Product Version: Revit Architecture 2009
2144 Downloads
|
|
|
 |
AGRV-HRAL_SeriesC-Metal & Glass Railing
# Floor mounted railing
# rail support
We proivde 2 type of Railing in RVT : H120,H150
We also create a Baluster using the railing support familt, so you can place it manully.
Visit our website AgrvArchitect.com for more families
Because the rvt file is too big, so I put the file in here :
https://drive.google.com/file/d/1TIqQGfTZHJhLxvAHKhBZwEPG244N61jc/view?usp=sharing
|
No Rating |
Product Version: Revit Architecture 2018
1362 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
88 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
41 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
69 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
48 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
36 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
94 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
45 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
|
Product Version: Revit Architecture 2019
45 Downloads
|
|
|
 |
JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm. |
No Rating |
Product Version: Revit Architecture 2019
33 Downloads
|
|
|
 |
MIFAB® Series MI-QHUB (specify size) no hub couplings are manufactured with Quick Hub gaskets made with neoprene and three sealing rings that meets the requirements of ASTM C564 housed inside a Type 301 stainless steel corrugated shield. Two (2” through 4” size), four (6” through 10” size) or six (12” sizes) Type 301 stainless steel clamps tightened with 5/16” Type 305 stainless steel hex head screws surround the shield to provide the sealing force. MI-QHUB Series Couplings are tested and certified to the ASTM-C1277, CISPI 310, NSF and CSA B602 (File # 247608) Standards and are listed with IAPMO. Also tested and certified by Intertek Testing Services to CAN/ULC S102.2 “Smoke Test.” Patented Pipe Clamp for joining all types of pipe. |
No Rating |
Product Version: Unknown
42 Downloads
|
|
|
Search