A simple, adjustable pedistal mounted hydronic radiator with pipe connectors.

No Rating

Product Version: Revit MEP 2010

874 Downloads

Fire Extinguisher made in Revit 2014.

• Adjustable Height


• Pipe Connectors


• Standard Dimensions

This is my first uploaded family so I hope you Like it. take a look at www.incide.it

Product Version: Unknown

13013 Downloads

assign it a rainfall rate, and total surface area (has ability to include vertical surfaces as well)

It will size the pipe dia based on michigan plumbing code

-can be adapted for other states, based on Wade

Based on 1% slope I intend to include rates based on 2% slope at a later date

Product Version: Revit MEP 2009

14346 Downloads

Created this P-Trap as a basic/generic/parametric family for use in renderings or section details.  It's NOT configured as a "smart" plumbing family for use with MEP Revit.  The material and dimensions are all parametic, including radius of the pipe. 

No Rating

Product Version: Revit Architecture 2020

1042 Downloads

Created this P-Trap as a basic/generic/parametric family for use in renderings or section details.  It's NOT configured as a "smart" plumbing family for use with MEP Revit.  The material and dimensions are all parametic, including radius of the pipe. 

No Rating

Product Version: Revit Architecture 2020

470 Downloads

Floor trough based on Advance Tabco Floor Troughs. Width and Lengh fully parametric with one 4" drain. Consult Manuf. for sizes. Stainless Steel grate. 3D fine and 2D medium and coarse representaion, 4" SS pipe connector.

Product Version: Revit MEP 2010

7591 Downloads

Elkay PRK Series Sink based off Manufactures DWG drawings and PDF specs. 100% Revit with pipe connectors. No AutoCAD information in Family!

No Rating

Product Version: Revit MEP 2011

6256 Downloads

The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet.

No Rating

Product Version: Revit Architecture 2019

282 Downloads

The roof outlet has a rectangular pipe and an inlet with a 45° angle so it matches the fillet / cant strip which is placed in the corner between the roof surface and the parapet.

No Rating

Product Version: Revit Architecture 2019

148 Downloads

Floor trough based on Advance Tabco Floor Troughs. Standard Width and Lengh with two 4" drain outlets. Consult Manuf. for sizes. Stainless Steel grate. 3D fine and 2D medium and coarse representaion, 4" SS pipe connectors.

Product Version: Revit MEP 2010

6192 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

95 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

43 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

71 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

49 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

39 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

99 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

46 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

Product Version: Revit Architecture 2019

46 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

34 Downloads

MIFAB® Series MI-QHUB (specify size) no hub couplings are manufactured with Quick Hub gaskets made with neoprene and three sealing rings that meets the requirements of ASTM C564 housed inside a Type 301 stainless steel corrugated shield. Two (2” through 4” size), four (6” through 10” size) or six (12” sizes) Type 301 stainless steel clamps tightened with 5/16” Type 305 stainless steel hex head screws surround the shield to provide the sealing force. MI-QHUB Series Couplings are tested and certified to the ASTM-C1277, CISPI 310, NSF and CSA B602 (File # 247608) Standards and are listed with IAPMO. Also tested and certified by Intertek Testing Services to CAN/ULC S102.2 “Smoke Test.” Patented Pipe Clamp for joining all types of pipe.

No Rating

Product Version: Unknown

43 Downloads

Sectional overhead door with dock seal and 2 pipe guards

Product Version: Revit Architecture 2008

9925 Downloads

Sectional overhead dock door with shelter and 2 pipe guards

No Rating

Product Version: Revit Architecture 2008

3721 Downloads

Rain water tank sits beneath topography with a slight rise above the surface for access and 4 connections at the base. I deal for use on small blocks to maximise space.

W 2440 x L 3780 x H 1270

Material (design is meant to be Poly), Length and width adjustable parameters and i have added pipe connections however i am not HVAC so others may be able to improve on the realistic fitting diameter sizing.

No Rating

Product Version: Revit Architecture 2015

3578 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

Product Version: Revit Architecture 2019

78 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

28 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

23 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

19 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

17 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

25 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

22 Downloads