 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
16 Downloads
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
32 Downloads
|
|
|
 |
Series FS-800 epoxy coated cast iron sanitary can wash drain with secured nickel bronze grate, stainless steel sediment bucket, spray nozzle assembly with 1/2 in. (13mm) NPT pipe connection, and 4 in. (102mm) no hub (standard) outlet. |
No Rating |
Product Version: Revit Structure 2014
275 Downloads
|
|
|
 |
The design of JUAL angular roof outlet is similar to the vertical roof outlet, but the pipe has a 92° angle immediately after the intlet so water is drained horizontally from the roof. The angular roof outlet can be supplied in all standard diametres from 50 mm to 110 mm with various roof membrane types. |
No Rating |
Product Version: Revit Architecture 2019
225 Downloads
|
|
|
 |
The design of JUAL angular roof outlet is similar to the vertical roof outlet, but the pipe has a 92° angle immediately after the intlet so water is drained horizontally from the roof. The angular roof outlet can be supplied in all standard diametres from 50 mm to 110 mm with various roof membrane types. |
No Rating |
Product Version: Revit Architecture 2019
124 Downloads
|
|
|
 |
The design of JUAL angular roof outlet is similar to the vertical roof outlet, but the pipe has a 92° angle immediately after the intlet so water is drained horizontally from the roof. The angular roof outlet can be supplied in all standard diametres from 50 mm to 110 mm with various roof membrane types. |
No Rating |
Product Version: Revit Architecture 2019
254 Downloads
|
|
|
 |
Cow Tongue Wall Scupper Outlet - based on a 3" pipe diameter. This family has an instance parameter called "Wall Offset", which allows for adjustments for walls with a thicker base than upper portion. Initial placement is to the exterior face of wall. Once placed, adjust the wall offset parameter to bring it out to the finished face of stacked walls. |
|
Product Version: Revit Architecture 2014
3561 Downloads
|
|
|
 |
Cow Tongue Wall Scupper Outlet - based on a 6" pipe diameter. This family has an instance parameter called "Wall Offset", which allows for adjustments for walls with a thicker base than upper portion. Initial placement is to the exterior face of wall. Once placed, adjust the wall offset parameter to bring it out to the finished face of stacked walls. |
|
Product Version: Revit Architecture 2014
4165 Downloads
|
|
|
 |
MIFAB® Series MI-QXHUB (specify size) heavy duty shielded no hub couplings are manufactured with gaskets made from neoprene and three sealing rings (meets the requirements of ASTM C564) housed inside a Type 304 stainless steel corrugated shield. Four (2” through 4” size), six (5” through 12” size) Type 304 stainless steel clamps tightened with 3/8” Type 305 stainless steel hex head screws surround the shield to provide the sealing force.
MI-QXHUB Series Couplings are tested and certified to the ASTM-C1540 and CSA B602 Standards. The MI-QXHUB are also tested and certified by Intertek Testing Services to the CAN/ULC S102.2 “Smoke Test”. The MI-QXHUB are tested and certified by IAPMO to comply to the FM1680 Standard (except for markings). Patented Pipe Clamp for joining all types of pipe. |
No Rating |
Product Version: Unknown
37 Downloads
|
|
|
 |
Dryer-Ells are ten inch radius, smooth interior elbows that reclaim allowable duct length. Based on ASHRAE methodology for calculating friction loss, they can be measured the same as straight pipe. This removes the run length penalty most code requires for every elbow.
https://dryer-ell.com/introducing-dryer-ell-model-lt90 |
No Rating |
Product Version: Unknown
575 Downloads
|
|
|
 |
Dryer-Ells are ten inch radius, smooth interior elbows that reclaim allowable duct length. Based on ASHRAE methodology for calculating friction loss, they can be measured the same as straight pipe. This removes the run length penalty most code requires for every elbow.
https://dryer-ell.com/introducing-dryer-ell-model-lt45 |
No Rating |
Product Version: Unknown
364 Downloads
|
|
|
 |
Working with this family:
-Change type to go from Single to Double sided.
-Use the "Right/Left Handed" yes/no toggles to change direction of the flow of pipe.
-In order to have a double wye connection style - Have *both* the "Right/Left Handed" as well as the "Double Sided - Right/Left" toggle on. (Any questions with this feel free to post comments, and i will be happy to answer.)
-Use the "Center of Connection Point & Stand Notches" for the elevation.
*Note* - Available elevation adjustment is: 4.25" - 9.75" |
No Rating |
Product Version: Revit MEP 2015
869 Downloads
|
|
|
 |
MIFAB Series C1440-S (select model number with required plug pipe size) expandable line cleanout plug with tapping and 7” x 7” square, smooth nickel bronze access panel with allen key screws and anchor frame with mounting lugs. |
No Rating |
Product Version: Unknown
72 Downloads
|
|
|
 |
MIFAB Series C1450-S (select model number with required plug pipe size) line cleanout plug with blind tapping and 7” x 7” square, smooth nickel bronze access panel with allen key screws and anchor frame with mounting lugs. |
No Rating |
Product Version: Unknown
96 Downloads
|
|
|
 |
Series 957, 957N, 957Z Reduced Pressure Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a potential health hazard. Compact design and lightweight stainless steel construction (70% lighter than traditional designs) makes installation easier and faster. Groove connections also ease installation and pipe alignment. A variety of shutoff valve options are available. |
No Rating |
Product Version: Revit MEP 2014
796 Downloads
|
|
|
 |
The vertical bowl outlet consists of a bowl that cumulates the water before it flows down into the pipe system of the building via vertical pipes of standard diametres from ø50 to ø110 mm.Bowl outlets are made from stainless steel and can be delivered with integrated bitumen or foil membrane. |
No Rating |
Product Version: Revit Architecture 2019
134 Downloads
|
|
|
 |
Gallus 2000-NG4 Gas Meter for utlity reticulation at property boundary
Wall hosted, Category Speciality Equipment
White painted metal sheet cover with On/Off control
Adjustable length gas supply pipe (instance parameter), adjustable position on wall for unit.
Plan View only shows Gas meter icon graphic.
Gas label has distance from wall control to suit different view scales / personal prefs.
Materials partly assigned so User needs to check mats before render otherwise shaded views set up. |
|
Product Version: Revit Architecture 2013
6465 Downloads
|
|
|
 |
The vertical bowl outlet consists of a bowl that cumulates the water before it flows down into the pipe system of the building via vertical pipes of standard diametres from ø50 to ø110 mm.Bowl outlets are made from stainless steel and can be delivered with integrated bitumen or foil membrane. |
No Rating |
Product Version: Revit Architecture 2019
131 Downloads
|
|
|
 |
Series 757 Double Check Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a non-health hazard. Compact design and lightweight stainless steel construction (70% lighter than traditional designs) makes installation easier and faster. For unmatched versatility, assemblies are available for horizontal, vertical, or N pattern installations while groove connections allow ease of installation and pipe alignment. Patented tri-link check assemblies are also designed for easy serviceability. A variety of shutoff valve options are offered. |
No Rating |
Product Version: Revit MEP 2014
837 Downloads
|
|
|
 |
Festivus Pole:
- Aluminum, Extruded Alloy 6063-T6
- Finish: Mill, As Fabricated (see note below)
- 1-1/2" Sch. 40 Pipe Size (1.900" Diam. W/.140" wall)
|
|
Product Version: Revit MEP 2012
694 Downloads
|
|
|
 |
Series LF3005A Lead Free* Dielectric Unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals, and features a male iron pipe thread to solder connection. It consists of a union nut, two tailpieces, and a gasket that separates the tailpieces to prevent an electric current from occurring. Series LF3005A is ideal in applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. Maximum Pressure: 250psi. |
No Rating |
Product Version: Revit MEP 2014
387 Downloads
|
|
|
 |
Series LF3007 Lead Free* Dielectric Unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals, and features a male iron pipe thread to female solder connection. It consists of a union nut, two tailpieces, and a gasket that separates the tailpieces to prevent an electric current from occurring. Series LF3007 is ideal in applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. Maximum Pressure: 250psi. |
No Rating |
Product Version: Revit MEP 2014
136 Downloads
|
|
|
 |
Series LFFBV-3C-QC 2-Piece, Full Port, Lead Free* cast copper silicon alloy Ball Valves with Quick-Connect Technology are used in residential and commercial potable water applications. They feature a bottom-loaded blowout proof stem, virgin PTFE seats and thrust washer, adjustable packing gland, stem packing nut, chrome-plated brass ball adapter and steel handles. Comes with integral Quick-Connect inlet and outlet connections for fast installation on copper, CPVC, PEX, and PB pipe. |
No Rating |
Product Version: Revit MEP 2014
630 Downloads
|
|
|
 |
Series LF3008 Lead Free* Dielectric Unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals, and features a female brass pipe thread to female solder connection. It consists of a union nut, two tailpieces, and a gasket that separates the tailpieces to prevent an electric current from occurring. Series LF3008 is ideal in applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. Maximum Pressure: 250psi. |
No Rating |
Product Version: Revit MEP 2014
186 Downloads
|
|
|
 |
JUAL Outlet with rectangular pipe. The outlet can be supplied in many different standard dimensions with a cross section ranging from 77x56 to 500x100 mm and lengths from 400 mm to 1000 mm.
|
No Rating |
Product Version: Revit Architecture 2019
50 Downloads
|
|
|
 |
JUAL Outlet with rectangular pipe. The outlet can be supplied in many different standard dimensions with a cross section ranging from 77x56 to 500x100 mm and lengths from 400 mm to 1000 mm.
|
No Rating |
Product Version: Revit Architecture 2019
103 Downloads
|
|
|
 |
JUAL Outlet with rectangular pipe. The outlet can be supplied in many different standard dimensions with a cross section ranging from 77x56 to 500x100 mm and lengths from 400 mm to 1000 mm.
|
No Rating |
Product Version: Revit Architecture 2019
52 Downloads
|
|
|
 |
The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line |
No Rating |
Product Version: Unknown
193 Downloads
|
|
|
 |
The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line |
No Rating |
Product Version: Unknown
111 Downloads
|
|
|
 |
The JUAL Vapour Barrier Roof Outlet is a vertical roof outlet which is installed in the vapour barrier below the insulation. The bottom part of the outlet fits into a standard downpipe. The upper part of the outlet pipe is wider and has a lip seal. It works as a watertight socket for a standard roof outlet which is installed at the roof surface.The vapour barrier roof outlet is available in one length and in various standard diameters. |
No Rating |
Product Version: Revit Architecture 2019
130 Downloads
|
|
|
Search