A VERY STANDARD PIPE THAT IS PARAMETRIC, ITS HAS A PIPE WALL THICKNESS OF 30MM, I HAVE SET UP A FEW DIFFERENT PIPE RADIUS ALREADY, BUT BY EDITING THE FAMILY YOU CAN HAVE WHATEVER PIPE THICKNESS YOU LIKE. ITS STRETCHABLE BY BOTH THE INPUT AND DRAG METHODS. THE MATERAIL IS ALSO EASILY CHANGABLE.

Product Version: Unknown

13629 Downloads

A VERY STANDARD PIPE THAT IS PARAMETRIC, ITS HAS A PIPE WALL THICKNESS OF 30MM, I HAVE SET UP A FEW DIFFERENT PIPE RADIUS ALREADY, BUT BY EDITING THE FAMILY YOU CAN HAVE WHATEVER PIPE THICKNESS YOU LIKE. ITS STRETCHABLE BY BOTH THE INPUT AND DRAG METHODS. THE MATERAIL IS ALSO EASILY CHANGABLE.

Product Version: Unknown

8514 Downloads

Plumbing pipe clip, parametric to any pipe size, but typically used for pipe 2 inch and less.  Stainless steel, but can be adjusted to any material.

Product Version: Revit Architecture 2018

2848 Downloads

The soil pipe ventilation with double pipe has an movable pipe for installation in a soil pipe which is lead through the roof surface. It fits soil pipes in DN diameters from ø50 to ø110 mm.

No Rating

Product Version: Revit Architecture 2019

421 Downloads

Pipe support assembly created for a SMEP modular residential project.

Consisting of a strut (length can be schedule), a strap, and angles.

Oriented from the strut's left end. The straps can be aligned to pipe centres.

Let me know of any improvements you hvae.

Product Version: Revit MEP 2012

4055 Downloads

pipe Sleeves for roof and Wall penetrations.

No Rating

Product Version: Unknown

217 Downloads

Wall hosted straight down pipe with RWH

Product Version: Revit Architecture 2011

8407 Downloads

Residential with conection to wall pipe

No Rating

Product Version: Revit Architecture 2010

724 Downloads

This is a paramteric precast concrete pipe or ring wich comes with several family tipes. You can use it as a pipe or rotate it and use it as a ring. The paramteric parameters allow you to create you own dimensions and material.

Hope you like it. It's my first upload, so please leave a review.

No Rating

Product Version: Revit Structure 2017

3429 Downloads

Basic Quarter pipe - Parametric width only, can hide Rail and Box Platform

Product Version: Unknown

2695 Downloads

Floor based custom coffee table built out of various sizes of PVC pipe.  I built this in real life years ago and finally built a revit family for it.  Height, as well as table top thickness and radius are parametric.  Both top and base have material parameters.  "pipe base" sizing not parametric since it is quite complicated.  If looking to make table much wider, I'd suggest editing family and scaling each "pipe" set to your desired size.  Enjoy!

Revit 2017

Product Version: Unknown

1366 Downloads

Half Pipe ramp NOHS skate skateboard skateboarding outdoor sports extream sports wooden 

Product Version: Unknown

5858 Downloads

Simple skatepark half pipe, with ladders, as far as i can find the only on revitcity, needs material adjustment for location

Product Version: Revit Architecture 2009

2563 Downloads

There is no pipe in structural framing for some reason. there is one in structural columns but not framing.  So I made one.

No Rating

Product Version: Revit Architecture 2013

6422 Downloads

Full parametric element.

You can set the length of fence, the material, the height of fence...

When you set the full length then the fence make automatically the allocations.

The element make the calculation of waste pipe, of concrete amount and of pipe amount.

Much more full parametric elements:

www.revittuning.com

Comming soon

Product Version: Revit MEP 2010

23752 Downloads

Parametric detail item for an infinite pipe. Diameter and thickness are type properties. Length and visibility of masking region are instance parameters. Great for your typical details. 

No Rating

Product Version: Revit Structure 2018

570 Downloads

I modled this for a project at work it's a Glycol storage tank c/w baffel, pipe connections(top & bottom) and base. It's used in a pharmaceuticle plant. This is my frst upload, feel free to mess about with it and I hope it helps :)

Product Version: Revit MEP 2013

7255 Downloads

A Pipe Sleeve through walls, Parametric Inside Diameter with thickness that will cut the wall opening. Material and front plate thickness are parametric for types

No Rating

Product Version: Revit Architecture 2009

3448 Downloads

A simple instance based pipe bollard family that allows you too set the depth and diameter of the concrete base as well as the diameter and height of the metal bollard itself.

The bollard is colored standard yellow and concrete is cast in place gray.

No Rating

Product Version: Unknown

1214 Downloads

Parametric pipe

Product Version: Revit Building 9.1

2318 Downloads

Overhead steel door with 4 pipe guards

No Rating

Product Version: Revit Architecture 2008

4361 Downloads

Drainage-Marley-Pipe V

No Rating

Product Version: Unknown

6927 Downloads

Here is a line based parametric pipe for indicative use in architectural applications eg field drains or main pipe runs

Horizontal runs - draw in plan

Vertical or sloping runs - set the workplane to a vertical plane eg a nearby face.   

Symbolic line in plan (using Hiroshi Jacobs tip - using an invisible  model line that goes vertically so that the view cuts the object. Cheers)

http://vtourinteractive.webs.com/

Product Version: Revit Architecture 2010

2907 Downloads

Product Version: Revit Architecture 2011

3239 Downloads

Parmetrisch

Product Version: Revit Architecture 2013

4074 Downloads

Product Version: Revit Architecture 2011

5368 Downloads

No Rating

Product Version: Revit MEP 2008

1036 Downloads

No Rating

Product Version: Unknown

2864 Downloads

No Rating

Product Version: Revit MEP 2009

999 Downloads

Product Version: Unknown

26160 Downloads