Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.  Designed for a home work shop.

Product Version: Revit Architecture 2015

21055 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

No Rating

Product Version: Revit Architecture 2015

6325 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

643 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

356 Downloads

This is my most ambitious family yet.

This ADA-compliant countertop and sink(s) was made to solve frustrations in our office that there were no functional and flexibile families to meet generic bathroom sink and countertop needs.

This accomplishes that, I feel.

User can specify length of the countertop, materials, and up to four sinks or as few as zero.  

 Sink locations space automatically to fill the surface, depending on how many sinks are visible.  If for some reason you'd like the sinks to be asymmetric, a "shift sink" field is avaiable in the properties bar.

Product Version: Revit Architecture 2014

37401 Downloads

Kitchen Island utilizing 45 degree angles. This uses standard Revit cabinets.

42" Standard Bar Height.

Material Parameters exist for Countertop Material, Wall Material, and Brace Material.

Includes "Defy 600 Hob and under counter oven" uploaded by Cassie

Defy 600 Hob and under counter oven

Product Version: Revit Architecture 2013

28383 Downloads

Shuffleboard table, 10'-4" length (8'-8" playing surface length).  Parameters control materials and puck on/off visibility.

Dimensions are not parameter controlled.  Based on dimensions of Indio metal outdoor shuffleboard table from Pottery Barn. Felt color is blue.  

https://www.potterybarn.com/products/indio-metal-shuffleboard-slate-mp/?pkey=cgame-tables

Keywords: Shuffleboard, puck, bar game, game

No Rating

Product Version: Revit Architecture 2020

3155 Downloads

A standard size pool table (8' standard size = 44"w x 88"l playing surface).

The materials can be controlled by parameters.  Visibility of the pool cue and balls can be controlled by parameters as well.  A 3'-6" play area clearance is built in as well, and can also be controlled for visibility.

The model is not currently set for the table size to be parameter controlled, and if you adjust the size it'll get wonky. 

BUT!  If you're looking for that standard size pool table, this could be the one for you.  I'll try to upload a better version later with adjustable size parameters when I get the chance to update this one.  

Pool table, snooker table, bar games, billiard, billiards

Product Version: Unknown

21739 Downloads

Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. It consists of a bronze (1/2 to 2 in) body construction that is easy to maintain and service. Series 007 is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

416 Downloads

Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. They have a bronze (1/2 to 2 in.) body construction that is easy to maintain and service. Series 007 is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

247 Downloads

Manufacturer: Ametco Manufacturing Corporation.URL: www.ametco.com 

Fully parametric V-blades louver. Adjustable Width, Number of Blades, automaticaly calculated Hight. According to manufacturer blade design, 15 types of color, textured, 100% and 80% visual screening. Family type catalog included.

The fixed louver Venetian Design allows up to 100% visual screening in any direction and still allows airflow for ventilation. The Venetian Design has V-shaped extruded aluminum main bar welded to extruded aluminum framing bars. After fabrication Venetian design is polyester powder coated for long lasting maintains free beauty.

Product Version: Revit Architecture 2012

6109 Downloads

Series LF4001E Lead Free* Dielectric Unions feature a female iron pipe thread to solder connection. Compliant to American Society of Sanitary Engineering ASSE Standard 1079-2005. These unions are designed to be installed between pipe made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. Maximum Pressure: 250psi (17.2 bar). Maximum Temperature: 180°F (82°C)

No Rating

Product Version: Revit MEP 2014

100 Downloads

Series LF3006 Dielectric Unions feature a female iron pipe thread to female iron pipe thread (black). These unions are designed to be installed between pipe made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. The LF3006 features Lead Free* construction to comply with Lead Free* installation requirements. Maximum Pressure: 250psi (17.2 bar).

No Rating

Product Version: Revit MEP 2014

233 Downloads

Series 007DCDA Double Check Detector Assemblies prevent the backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. They incorporate a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. The compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Unknown

692 Downloads

Series 709DCDA Double Check Detector Assemblies prevent backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. It incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. Its compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

546 Downloads

Series 774 Double Check Valve Assemblies prevent the backflow of polluted water from entering into the potable water supply. They have a compact construction and short lay length, ideal for retrofit installations. They feature a lightweight stainless steel body and low head loss. Series 774 is ideal in applications identified by local authorities as non-health hazard. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

512 Downloads

ROCA

Application space: Bath

Reference: 5A9743C00

Index: Home > Products > Faucets > Shower columns > Shower column

Style: Loft

Description: The avant-garde design and the technology blend together to create strong and high-quality elements. This design is a timeless, singular and unalterable style proposal with a refined finish and the originality of its contours fill every space with elegance, precision and distinction.

Faucet: Included

Finish: Chrome

Handshower: Included

Installation type: Wall-mounted

Minimum water pressure required(bar): 2

Mixer type: Twin lever

Number of water outlets: 2, Shower flexible supply hose included 

Shower head function: Rain 

Suitable for: Shower

Product Version: Revit Architecture 2012

123183 Downloads

Series 709DCDA Double Check Detector Assemblies prevent backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. They incorporate a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. Their compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

302 Downloads

Series LF53 Lead Free* Pressure Relief Valves are spring operated Lead Free* brass relief valves designed to be used only as protection from the buildup of excessive pressure in systems containing water, oil, or air. These valves are not ASME approved safety relief valves and should not be used in system applications with this requirement. They feature a Lead Free* brass construction with stainless steel springs. Series LF53 is factory preset to standard pressure settings of 75, 100 or 125 psi(5.2, 6.9 or 8.6 bar).

No Rating

Product Version: Revit MEP 2014

144 Downloads

Series LFN9, LFN9C Lead Free* Dual Check Vacuum Breakers prevent the reverse flow of polluted water from entering into the potable water supply. They have a Lead Free* brass body construction with an atmospheric vent, and NPT female inlet and outlet connections. Series LFN9 and LFN9C are designed for non-health hazard, continuous pressure applications. Series LFN9C comes with chrome plated finish. Maximum Working Pressure: 125psi (8.6 bar)

No Rating

Product Version: Revit MEP 2014

78 Downloads

Series 757, 757N Double Check Valve Assemblies prevent the backflow of pollutants that are objectionable but not toxic, from entering into the potable water supply. Its compact housing consists of two independently operating tri-link check valves, two shutoff valves, and four test cocks. It features a stainless steel housing and sleeve and is 70% lighter than traditional designs. Series 757, 757N is designed for non-health hazard applications and may be installed under continuous pressure service to protect against both backpressure and backsiphonage. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

386 Downloads

Series LF560 Mini Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is ideal where a small, economical package is required such as on special industrial process applications, miscellaneous plumbing applications, and OEM equipment. Series LF560 is suitable for water supply pressures up to 300psi (21 bar). The LF560 features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

149 Downloads

Series LF123LP Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 200psi (13.8 bar) and may be adjusted from 10 - 30psi (69 - 207 kPa). The standard setting is 30psi (207 kPa). All parts are quickly and easily serviceable without removing the valve from the line. The LF123LP features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

291 Downloads

Series 719 Double Check Valve Assemblies are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements. They have a bronze alloy body construction and chloramine resistant elastomers. Series 719 features a separate access, top-entry check valve design for ease of maintenance and is for use at referenced cross-connections in non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

312 Downloads

Series LF709 Lead Free* Double Check Valve Assemblies prevent the reverse flow of polluted water from entering into the potable water supply. They have a modular check design for easy maintenance and epoxy coated (FDA approved) cast iron body construction. Series LF709 is ideal at referenced cross-connections identified in non-health hazard applications. The LF709 features Lead Free* construction to comply with Lead Free* installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

353 Downloads

Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. They have a bronze body construction (1/4 to 2 in.) or FDA approved epoxy coated cast iron (2 1/2 to 3 in.), two in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

343 Downloads

Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of bronze body construction (1/4 to 2 in., 8 to 50mm) or FDA approved epoxy coated cast iron (2 1/2 to 3 in., 65 to 80mm), two, in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

435 Downloads

Series 919 Reduced Pressure Zone Assemblies prevent the reverse flow of contaminated water from entering into the potable water supply due to backsiphonage and or backpressure. They have a bronze body construction, two poppet style check valves, and replaceable check seats, with an intermediate relief valve. Series 919 compact modular design facilitates easy maintenance and assembly access. It is ideal for protection at health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit Structure 2014

119 Downloads

Series 774DCDA Double Check Detector Assemblies prevent the backflow of fire protection system substances from being pumped or siphoned into the potable water supply. They have a compact construction and short lay length, ideal for retrofit installations. They feature a lightweight stainless steel body, thermoplastic and stainless steel check valves, and low head loss. Series 774DCDA can be installed in the horizontal or vertical flow-up positions. It is designed for installation on applications identified by local authorities as non-health hazard, such as on fire protection systems. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

606 Downloads

Series LF719 Double Check Valve Assemblies are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements. They have a Lead Free* cast copper silicon alloy body construction and chloramine resistant elastomers. Series LF719 features a separate access, top-entry check valve design for ease of maintenance and is for use at referenced cross-connections in non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

132 Downloads