Non-hosted generic model family I built for fun.  It is based on the Innova DISCatcher Disc Golf target.  There is a High-detail and a Low-detail Type.  Actual chains proved to be too intense, so I opted for a surface pattern to represent the chains.

not parametric yet...

Product Version: Revit Architecture 2009

1786 Downloads

KUFI - Al-Ikhlas

-Depth Extrusion's Parametric

more at :

https://www.facebook.com/media/set/?set=a.447636519966.60334.502589966&type=3&l=1aeffd6bc8

Product Version: Revit Architecture 2011

10236 Downloads

This is an awesome little family I must say.  I have made a parametric column/girder/concrete base family where the you can control the number of columns and the column spacing.  The girder cut length will follow as you enter the amount of columns you want.  Can you believe I have totally mastered revit but still can't find a job!!!  Please rate and comment.

Product Version: Revit Architecture 2012

4670 Downloads

Parametric Materials Only.

Please like my Face Book Page, Thx! Page.https://www.facebook.com/JobeConstruction/

No Rating

Product Version: Revit Structure 2020

1127 Downloads

Casement Window with setback for a Brick wall.  Fully Parametric with Optional Header, Sill, and Side Trim.  Individual Material Assignments for Header, Sill and Side Trim along with Visibility Parameters to turn each on and off.

Product Version: Revit Architecture 2009

4959 Downloads

Can turn on/off top drawer to be open. Extent of drawer is true to product. Material is a parameter, but pine is the default. Size is not parametric, dims are true to IKEA's website. But reference planes are used and dimensions added, so parameters can be easily applied if needed.

No Rating

Product Version: Unknown

106 Downloads

Fully Parametric Swing Window Family. Can open any open Angle for 2D & 3D. One by one leaf can change left/Right Open. Sunshape also can be on/off for every window.

If you need any Revit Family, please contact us on the following FB Page Messenger Link ( https://business.facebook.com/tbrotherengineeringtraining/?business_id=202883793686604&ref=bookmarks ) with detail specification about family you need. Thanks.

Product Version: Revit Architecture 2018

4876 Downloads

Fully Parametric Swing Window Family. Can open any open Angle for 2D & 3D. One by one leaf can change left/Right Open. Sunshape also can be on/off for every window.

If you need any Revit Family, please contact us on the following FB Page Messenger Link ( https://business.facebook.com/tbrotherengineeringtraining/?business_id=202883793686604&ref=bookmarks ) with detail specification about family you need. Thanks

Product Version: Revit Architecture 2018

3188 Downloads

Fully Parametric Swing Window Family. Can open any open Angle for 2D & 3D. One by one leaf can change left/Right Open. Sunshape also can be on/off for every window.

If you need any Revit Family, please contact us on the following FB Page Messenger Link ( https://business.facebook.com/tbrotherengineeringtraining/?business_id=202883793686604&ref=bookmarks ) with detail specification about family you need. Thanks.

Product Version: Revit Architecture 2018

3460 Downloads

To make it parametric. Please click the link.

Please support my Youtube Channel, if the family is helpful.>>>>https://www.youtube.com/watch?v=rTMxFs6_s3g

No Rating

Product Version: Unknown

532 Downloads

this is a fixed 40mm double casement window modeled off the Vantage profile, all elements are fully extruded right down to the neoprene seals.  This file is quite large but excellent for adding that extra detail to your peoject.  I think i've managed to iron out all the kinks.  This window is parametric.  One awning & one fixed pane - even

Product Version: Revit Architecture 2009

27548 Downloads

Double Vanity - CAROLINE PARKWAY 72 Inch MD-2172

Not Parametric / No Material Designations

No Rating

Product Version: Revit Architecture 2014

7715 Downloads

MY FIRST MODEL UPLOAD

THANK YOU TO

Kiddie Pool Ball - Free CAD Drawings

RevitCity.com | Object | parametric swimming pool

No Rating

Product Version: Unknown

71 Downloads

Parametric segmented arch Opening,  Requires Height, Springing height and Width.  The radius of the arc is calculated from the height of the segment (Height-Springing)  and the chord length(Width)

Product Version: Revit Architecture 2009

9067 Downloads

Parametric wall assembly tag for use in tagging wall types in detail component views.  Tick marks are instances that can be oriented left, right, up or down.  Designed for use with "Wall Type Tag", "Wall Type Tag - Dummy" and "Wall Assembly Title" - search RevitCity for related content

Product Version: Revit Architecture 2017

1031 Downloads

Fully parametric C section created in Revit Architecture 2012. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.

The family type is Structural Column.

For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology.

Product Version: Revit Architecture 2012

3948 Downloads

Parametric Detail Component for Tate Access Floor Pedestal

No Rating

Product Version: Revit Architecture 2009

1365 Downloads

parametric detail item

Sealant on backing rod

No Rating

Product Version: Revit MEP 2013

995 Downloads

Heres a Fully parametric shower tray and enclosure modelled for a recent job. The tray is changable in width and depth. The screen and screen framing changes when altering width & depth.

Shower tray material, Screen, Screen frame, Handle, and Trap materials are all changable.

Hope you like it.

Comments are welcome. Cheers

Product Version: Revit MEP 2014

73480 Downloads

Parametric Iron Grill Door (Burger Door) Family. Can adjust Width & Height.

If you need any Revit Family, please contact us on the following FB Page Messenger Link ( https://business.facebook.com/tbrotherengineeringtraining/?business_id=202883793686604&ref=bookmarks ) with detail specification about family you need. Thanks.

Product Version: Revit Architecture 2018

11207 Downloads

My best recreation of the Sargent Chandel-Air from Meyda.  54" round, diffuser body, metal trim, fan blades, fan body materials can be set.  Only shaft length (to adjust hanging height) is parametric.

Made this for my wife who is an interior design student.  Hopefully is helps some others out there.

No Rating

Product Version: Revit Architecture 2017

474 Downloads

Fully Parametric Office Container Family. Can open any Door Angle for 2D & 3D. Base Concrete can add and remove by one click. Container Roof Can be On/Off.

If you need any Revit Family, please contact us on the following FB Page Messenger Link ( https://business.facebook.com/tbrotherengineeringtraining/?business_id=202883793686604&ref=bookmarks ) with detail specification about family you need. Thanks.

Product Version: Revit Architecture 2018

12039 Downloads

Otis Gen2 Premier lift

Non parametric wall based lift modeled based on Otis 13 person 1000kg car.

has detail lines for floor plan and model for sections / elevations.

This is a NZ /Aus lift with metric units. Used in a 2 story Hospital building. (administration)

Included are the Otis pdfs. Fact sheet, Plans & builder guide.

Made by SDHB Revit Team

Product Version: Revit Architecture 2012

32303 Downloads

Fixed trapezoid window with slope top and bottom to match slope of the roof.  Fully parametric (Though not tested in All configurations): roof slope; overall height and window height.  Revit 2012

Product Version: Revit Architecture 2011

6500 Downloads

Gate Garage Door. Fully parametric. Door and side panels are controlled separately. (Side panels can be turned off individually if they are not needed. There are a lot of math calculation in this family so when changing sizes it is a little slow. 

Rvt 15

Hope it helps,

smh

Product Version: Revit Architecture 2015

11138 Downloads

Marvin Casement Window Family, with trim.  Modern window without dividers.  These are parametric - the windows and the trim can both be resized.  Several family types are included.  Add more by downloading the Marvin Clad Ultimate Casement DWG from their website (or download attached) and duplicate additional sizes.

Product Version: Revit Architecture 2009

8314 Downloads

This fully parametric handicap accesible ramp with flared sides is based on a 1:12 slope for the ramp and 1:10 slope for the flared sides. Adjust the curb height and the ramp automatically calculates the depth and the width of the flares. The ramp width itself is expandable and the material is changeable. You can recalculate the slope ratios to meet your local codes. Enjoy!

Product Version: Revit Building 8

20912 Downloads

Parametric A325 Heavy Hex Bolt Assembly. This bolt is set to 3/4"Ø by default, but also contains 1/2"Ø, 5/8"Ø, 7/8"Ø, 1"Ø, 1-1/4"Ø & 1-1/2"Ø sizes. Based on Portland Bolt Specs. Revit 2012.

Product Version: Revit Structure 2012

11508 Downloads

Parametric Pendant Lighting (Exposed Bulb).  Not ceiling mounted so heights can be fully adjustable.

WARNING: I accidentally made type parameters instead of instance parameters so it could be a problem if you want to individually adjust settings of multiple instances. However, if you don't mind all fixtures changing at the same time, you are good to go.

Parameters: Bulb height (keep at 0'-0" at all times) / Cord Length / Support (Rail) height, Rod Length, Materials

Light sources are nested as separate bulbs

Product Version: Revit Architecture 2015

8333 Downloads

Fully parametric U section created in Revit Architecture 2012. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.

The family type is Structural Framing.

For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology.

No Rating

Product Version: Revit Architecture 2012

1847 Downloads