This is an arched carport shade I made for a friend by request for his project.

The length of the carport is parametric as are the materials.

I tried to figue out how I could make the tilt angle parametric and the width but it is complicated by the seeming limitations on the sweep curves and how they change as the ange flexes and the back to front length changes.  (Suggestions if you have them would be appreciated)

Product Version: Unknown

2882 Downloads

A non parametric generic model for a mortar and pestle for use in kitchen renderings. Only Materials are parametric.

Product Version: Revit Architecture 2017

5622 Downloads

Wall-Mounted Clothing Rod Bracket. Height is adjustable.

Product Version: Unknown

1396 Downloads

Made a countertop that has 3 nested sinks of 3 different sizes small, medium & Large.  It has a ton of parameters to turn off the other 2 sink sizes and you can turn off the backsplash too.  Has coutertop sink hole location so you can modify that to match the size of the sink and its location along the counter.

Product Version: Revit Architecture 2009

29437 Downloads

Parametric Water Tank with Parametric water inside. I tried to work out the water and tank volume calculations but gave up when I relaized that I and Revit can't do math very well

No Rating

Product Version: Revit Architecture 2011

12646 Downloads

Parametric Shadow Box for use on Sheets. Includes parametric grips and shadow offset.

Credit to teafoe5 for the shadow box he uploaded, which served as my starting point.

No Rating

Product Version: Revit MEP 2014

631 Downloads

This is a fully parametric tapered architectural column, where you can edit base as well as top dimensions and the material. Since it is fully parametric, you can have it taper either way.

No Rating

Product Version: Revit Architecture 2014

3311 Downloads

...the chieftec tower under my table ;)

Product Version: Unknown

5316 Downloads

Modified "Curved Shower Rod with Curtain".

No Rating

Product Version: Unknown

8088 Downloads

This is a parametric fireplace cap with either one or two chimney pots nested (controlled via visiablity control). The pot heights are not parametric controlled by the main file, but you can edit them and make them any size you'd like

This file is saved in Revit 2014 format

Product Version: Revit Architecture 2013

5689 Downloads

48"x30"x30" CADD table with drafting board cover and paralllel bar as used in CADD lab at Valencia College. Add separate Monitor, tower computer and keyboard.

No Rating

Product Version: Unknown

921 Downloads

Single kerb,

Kerb thickness and height are adjustable

Pavement count can be increased and reduced in family settings

Pavement height moves with kerb height

Pavement depth adjustable

Can turn pavements on and off

Modeled in Revit 2020.

No Rating

Product Version: Revit Structure 2020

1220 Downloads

Curved Glass Double Hung Window, appropriate for Victorian Turrets, towers, and curved walls.  In order to make more than one type, you must have the radius of the curved wall (Radius_wall), Height, Sill Height, and Width of the opening.  Unfortunately, you will have to fiddle with the Angle to match the Width_Arc_Length to the actual Width of the hole in the wall.

Product Version: Revit Architecture 2013

14459 Downloads

Parametric scalloped wooden fence with parmetric max/min height and length.  Non-parametric, but editable, are 4"x4" wood posts, 1"x6" boards, and 2"x4" horizontal supports.  Note some exact lengths throw an error - if so, just choose a slightly different length.

No Rating

Product Version: Revit Architecture 2020

1331 Downloads

spider Crane with parametric Boom Extension. I did not have time to model the hook cable and may need to add few parameters depending on your needs. I have decide to create one as I have not seen a parametric spider crane quiet as good as this. Hopefully it will help create better for future needs. Enjoy! by Vision Artititech

Product Version: Unknown

1665 Downloads

Fish Bowl with mirror base. Used as table centerpiece, personally. Placement is face-based; placing in 3D view is advised. Fish not included.

Product Version: Unknown

1643 Downloads

I added a parametric window opening to the existing Tub-shower enclosure created by someone else.

The width, height, and location of the opening are parametric.

No Rating

Product Version: Revit Structure 2009

4947 Downloads

Military stool(1923) by designer Gerrit Rietveld. See also Military table.

No Rating

Product Version: Unknown

3206 Downloads

Parametric DP & Spreader, parametric variables: spreader length, spreader diameter. ;)

No Rating

Product Version: Unknown

2129 Downloads

Parametric couch with parametric material

Product Version: Unknown

4156 Downloads

Full parametric element.

You can set the length of fence, the material, the height of fence and the slope of land, etc...

Reloaded the previous version.

Much more full parametric elements and this element with analysis function:

www.revittuning.com

Comming soon

Ps.:

Thanks to someone for the rate... :-D

Product Version: Revit MEP 2010

14627 Downloads

A dining table by Cattelan Italia version A in three type of finishing top and base. Before you upload the family in the project, you choose one of type in menu. Sorry, some dimensions in Russian, but I think, its not a problem.

Product Version: Revit Architecture 2018

1211 Downloads

Parametric Board Extension Over Pool

Paramentric Board Width

Parametric Materials

Railings Move with Board Width

Static 1M Height

Static Base Location

Static Stair Location

Product Version: Unknown

7541 Downloads

Morning and afternoon peeps.

Latest and greatest model is a nice simple TV stand. Parametric in length and depth and 3 parametric materials can be changed. Overall wood, front doors and glass doors.

No TV or any other stuff with this model, just the stand.

Enjoy guys

Andy

Product Version: Revit MEP 2014

56501 Downloads

One Door, multiple options.

Strip quantity can be increased within strips in the properties.

Door has adjustable architrave.

Modeled in Revit 2020. Fully adjustable in Revit except for the frame depts. Two frame sizes available.

No Rating

Product Version: Revit Structure 2020

42 Downloads

Perfect for game rooms

Improved look and materials

Please Rate

Product Version: Revit Architecture 2011

11831 Downloads

Parametric Truss - 2 Roof Beams.

Adjustable parameters:

1. truss thickness or 3D depth

2. wall thickness

3. bottom of cord height

4. top of cord height

5. overhang

6. span or length (w/o overhang)

 -- 

Please Rate this Object and Give Kudos or suggestions as appropriate to further enhance this forum.

Thank you! 

No Rating

Product Version: Revit Architecture 2016

1328 Downloads

Dinner Table Material Changeable (Mesa de Madera Redonda con materiales configurables

Product Version: Revit Architecture 2011

4173 Downloads

A simple starting block for swimming pool, metric, non-parametric in size, parametric in material

No Rating

Product Version: Revit Architecture 2013

2117 Downloads

Do you want to place an elegant corner kitchen as quickly as possible? You can try this file.

Place the kitchen and use the arrows INSTANCE to CONTROL THE lengths. You can show and hide the refrigerator and ovens if you have a small space for the kitchen. Good luck. Enjoy.

Product Version: Revit Architecture 2020

13769 Downloads