Hey guys, I noticed that someone posted a Parametric Slab Family in here, but nobody could've download it. Apparently it was a fake.

A while ago I managed to get a real Parametric Slab Family (with joists and bricks), but I don't remember from where or who is the author, but I decided to post it here, so other people could use it too.

PS: I DIDN'T DEVELOPED THIS FAMILY, SO, IF THE AUTHOR SHOWS UP AND ASK ME TO REMOVE IT, I WILL REMOVE IT.

How to use: Load the family "Laje_de_Forro_Parametric_Slab_17204.rfa" in the project and create a Beam System. Change the Beam Type to "Vigota Treliçada..." and you will see the joists. Use Fixed Distance of 0,43 m. Then select one or all the joists (not the beam system) and you will see the option "Visibilidade da Lajota" in the bottom of the Properties Panel. Check it to enable the brick. That is it.

---------------------------------------------------- 

Olá pessoal, eu percebi que alguém postou uma Família Paramétrica de Laje de Forro aqui, mas ninguém conseguia baixar ela. Aparentemente era uma montagem.

A alguem tempo atrás eu consegui uma Família de Laje de Forro real (com vigotas e lajotas), mas não consigo me lembrar onde e quem era o autor, mas decidi postar aqui, para que outras pessoas pudessem usá-la também.

OBS: EU NÃO DESENVOLVI ESSA FAMÍLIA, ENTÃO, SE O AUTOR APARECER E PEDIR PRA REMOVER, EU VOU REMOVER.

Como usar: Carregue a família "Laje_de_Forro_Parametric_Slab_17204.rfa" no projeto e crie um Sistema de Vigas. Mude o Tipo de Viga (Beam Type) para "Vigota Treliçada..." e você verá as vigotas. Use Distância Fixada de 0,43m. Depois selecione um ou todas as vigotas (não o sistema de vigas) que você verá a opção "Visibilidade da Lajota" no fundo do Painel de Propriedades. Marque essa opção para habilitar as vigotas. Pronto, é isso.

Product Version: Unknown

3818 Downloads

This door has lots of parametirc options and most are instance based for flexibility.  You can change the size, frame, casings (on/off), panel configuration (glass or solid), handle, and material.  You can also show the door closed or opened (any  angle) in 3D as well as in Plan View (3D angle and plan angle do NOT have to be the same and are instance based).

Product Version: Unknown

8689 Downloads

My first family shared on this site. I looked at the Classic Doric column posted here for help. There were a few things I didn't like about that one, so I built this one from scratch. The parameters break if you go too small with it (I think at like 3' tall) but other than that it seems to proportion perfectly. I may build one with a typical Doric base at some point or if anyone wants to modify it feel free. Just make sure to share it if you do. Thanks. 

I apologize for the large image, I assumed it would be resized.

Product Version: Revit Architecture 2014

12416 Downloads

Amateur size boxing ring with parameters for material.  Not dimensionally parametric because i only needed this size and had a deadline to meet.  Will make parametric for other sizes by request.

Product Version: Revit Architecture 2011

7220 Downloads

Parametric Precast Wheel Stops. Comes in standard 6',7' & 8' Lengths with or without drainage slots in base. Choice of beveled or flat ends. Cross section is also parametric. 7' Truck Wheel Stop included as well in same model. Revit 2012.

Product Version: Revit Architecture 2012

13406 Downloads

Non parametric face based candle holder. Handle and candle material are both parametric. You can change the material to your liking.

No Rating

Product Version: Revit Architecture 2014

1287 Downloads

This parametric family is based on a floor anchored / overhead braced toliet partition enclosure. The default size is for a standard toilet enclosure. All dimensions and materials are parametric.

Product Version: Revit Architecture 2011

65354 Downloads

parametric wash basin

mirror visibility parametric

Product Version: Revit Architecture 2011

8926 Downloads

Single Door - Fully Parametric - All elements are nested families and are completely parametric. Full Lite, Half Lite, and Flush Panel doors included. All Hardware included.

Product Version: Unknown

3656 Downloads

Floor-based generic model of an enclosed shower. Width, Depth, and Height are all adjustable Instance Parameters. Materials for shower door, glass, pan, lip, drain, and surround are all adjustable type paramteres. Flip controls are also included. Shower head and Valve control height are adjustable within the family. 

Modeled in Revit 2017, not 2016 as stated. 

Product Version: Revit Architecture 2016

107455 Downloads

A Pipe Sleeve through walls, Parametric Inside Diameter with thickness that will cut the wall opening. Material and front plate thickness are parametric for types

No Rating

Product Version: Revit Architecture 2009

3442 Downloads

A fully parametric decorative architectural column. The height of the middle cornice is parametric too.

Product Version: Revit Architecture 2017

10415 Downloads

The height, radius, start angle, end angle, border wall height, and materials are adjustable. Adjusting the start and end angles can make the dome a full dome, half dome, quarter dome, etc.

Product Version: Revit Architecture 2011

14018 Downloads

Computer Desk with pull-out keyboard shelf. Desk surface has customizable insert panel that any material can be applied to. The panel is intended to be glass, but any material would work. Parameters include width, height, depth, and insert panel thickness.

No Rating

Product Version: Revit Architecture 2013

4143 Downloads

Curb with gutter has Length as an Instance parameter; gutter width, curb width, and curb depth as type parameters, so you can set your curb once and just change the lengths. It is just a straight segment of curb, set to a default revit material of concrete. Please let me know if there are any bugs.

Product Version: Unknown

11871 Downloads

Parametric text line with multiple colors & multiple line thicknesses. This is a Annotative Component so it will only show on the view it is assigned to. Distance between the text boxes is parametric as well. Revit 2025

No Rating

Product Version: Unknown

318 Downloads

SEE WHOLE TUTORIAL OF WINDOW

https://youtu.be/LuIXSrg_1BM

SEE WHOLE TUTORIAL OF HANGING LIGHT

https://youtu.be/OY1HhuuR4Hc

No Rating

Product Version: Revit Architecture 2016

136 Downloads

This component works well with the latest RevitCity upload (Raised Table)

The chair is 3' 6" tall

Product Version: Revit Architecture 2018

6495 Downloads

Bar chair with a parameter for material.  Dining table and chairs are also uploaded under my profile.

Product Version: Revit Architecture 2013

18247 Downloads

A tic tae toe game set to add that detail in your renderings. This is a non parametric generic model. Materials are parametric.

No Rating

Product Version: Revit Architecture 2017

3071 Downloads

This Bed is totally adjustable, the pillows can be controlled in every way, the sheet can be adjusted in relation to the pillows, when adjusting pillow height, you must adjust from the base of the mattress, for some reason I couldn't constrain the height to the mattress height, also the sheet height is constrained to the pillow height

Product Version: Revit Architecture 2011

6632 Downloads

Large book open for coffee table type placement

Product Version: Unknown

6163 Downloads

cabinets with table for office use

Product Version: Revit Architecture 2013

12510 Downloads

A simple cushion with piping all around.  All dimensions and materials are parametric.

Please rate and offer suggestions.  Thanks!

Seat Cushion, Chair Cushion, Bench Cushion, Window Seat Cushion

Product Version: Revit Architecture 2017

2290 Downloads

Many useful options available.

Product Version: Revit Architecture 2010

5622 Downloads

water tank with radius and ht of the tank is parametric & material is also parametric

Product Version: Revit Architecture 2011

70247 Downloads

Non-parametric Chivas Regal Whiskey Bottle. Only the cap material is parametric.

Category made under -  generic models

No Rating

Product Version: Revit Architecture 2017

12368 Downloads

This family is drawn in plan on a line that can be locked to wall or not. There is no hardware visible.

The 4 shelves are variable in depth, thickness, spacing (total span from top to bottom), and height of top shelf.

It usually is versetile enough.

Product Version: Revit Architecture 2013

33663 Downloads

Model; Bed

Dimensions; 150x200 cm

Materials; YES

Parametric dimensions; NO

Parametric materials; YES

Faceted faces; NO

Keywords;

Simple bed, useful for basic interiors renders and nice top view aspect for furnishing plans.

Product Version: Revit Architecture 2014

27397 Downloads

adjustable size 4 burner oven 

part of my library also have 5 burner and 6 burner versions  full library available contact karinise@hotmail.com

Product Version: Revit Architecture 2012

15499 Downloads