This is a very complex but also very robust cubicle family. It is entirely parametric. The available cubicle sizes from the manufacturer are set as types but all dimensions and controls are parametric. The family contains one of the 3 cubicles shown in the image.

Manufacturer's Write Up:

This modern, circular workstation design comes in the following diameters: 84"W (minimum), 96"W, 108"W, 120"W as well as custom sizes. The post heights can be 29", 36", 42", 49", 67" and 84"H or any height within this range. The curved walls can be fabricated from acrylic, laminate, printed on styrene or metal, all in numerous colors and finishes. Worksurface material options are High Pressure Laminate, Thermofoil,or Powdercoat on MDF. Stations can come with an integrated electrical system. This workstation concept can be customoized to fit your space. We can assist you with the space planning of this unique workstation design.

Product Version: Revit Architecture 2011

23863 Downloads

Here is a parametric door family in CMU wall with customized door schedule to match our office one.This one can show unequal leafs, different swing angles, lites, glass type on schedule; frame depth and frame setback are all parametric.1. The leaf sizes is "Type" dependant, a pair of 3'-0"/2'-0" x 7'-0", will be shown PR. 3'-0"/2'-0"x7'-0" on schedule. -if you need a pair of 3'-0"/1'-4" x 7'-0" door, you can duplicate 3'-0"/2'-0" x 7'-0", go to "Element Property" cahnge the "Width2" to 1'-4" and rename it accordingly, it will show on schedule.2. The swing angle is an "instance", you can click the door #11, go to "Element Property" change "Swing angle" to 50, it will be changed on plan.3. The lite in active panel has three configurations, and a flush one. -go to door schedule view, under "Door Type" not "(2) DOOR TYPE", for Door # 12, if you change the number to 3, then go to 3D view, you can see the lite changed.4. Type of glass is an "instance", you can un-check the box "Exterior Door" on Door Schedule, the "(5)GLASS" will be changed from SGI to SG. SGI- safety glass insulated, SG-safety glass.5. Frame depth and setback (for masonry wall) are all "Family dependant", since I think that each project should have the same setback, if you want, you can modify  it and make it a "Type" or "Instance" parameter.Then you can go to Sheet A101 to see the print format of the door schedule.

Merry X'mas and happy New Year for all.

Product Version: Revit Architecture 2009

4923 Downloads

Here is a parametric door family in CMU wall with customized door schedule to match our office one.This one can show unequal leafs, different swing angles, lites, glass type on schedule; frame depth and frame setback are all parametric.1. The leaf sizes is "Type" dependant, a pair of 3'-0"/2'-0" x 7'-0", will be shown PR. 3'-0"/2'-0"x7'-0" on schedule. -if you need a pair of 3'-0"/1'-4" x 7'-0" door, you can duplicate 3'-0"/2'-0" x 7'-0", go to "Element Property" cahnge the "Width2" to 1'-4" and rename it accordingly, it will show on schedule.2. The swing angle is an "instance", you can click the door #11, go to "Element Property" change "Swing angle" to 50, it will be changed on plan.3. The lite in active panel has three configurations, and a flush one. -go to door schedule view, under "Door Type" not "(2) DOOR TYPE", for Door # 12, if you change the number to 3, then go to 3D view, you can see the lite changed.4. Type of glass is an "instance", you can un-check the box "Exterior Door" on Door Schedule, the "(5)GLASS" will be changed from SGI to SG. SGI- safety glass insulated, SG-safety glass.5. Frame depth and setback (for masonry wall) are all "Family dependant", since I think that each project should have the same setback, if you want, you can modify  it and make it a "Type" or "Instance" parameter.Then you can go to Sheet A101 to see the print format of the door schedule.

Merry X'mas and happy New Year for all.

Product Version: Revit Architecture 2009

5165 Downloads

MASS TEE Probe Cabinets store TEE probes safely and securely.  TEE probes hang freely and vertically to aid drying.

Our unique holder system helps prevent cross-contamination while protecting the transducer box.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Adjustable TEE Rack: stores 4 TEE probes

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

https://www.massmedicalstorage.com/product/4-8-tee-probe-scope-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

117 Downloads

MASS TEE Probe Cabinets store TEE probes safely and securely.  TEE probes hang freely and vertically to aid drying.

Our unique holder system helps prevent cross-contamination while protecting the transducer box.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Adjustable TEE Rack: stores 4 TEE probes

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

https://www.massmedicalstorage.com/product/4-8-tee-probe-scope-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

84 Downloads

MASS TEE Probe Cabinets store TEE probes safely and securely.  TEE probes hang freely and vertically to aid drying.

Our unique holder system helps prevent cross-contamination while protecting the transducer box.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Adjustable TEE Rack: stores 8 TEE probes

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

https://www.massmedicalstorage.com/product/4-8-tee-probe-scope-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

240 Downloads

Eaton K-Factor transformers are specifically designed to withstand the harmful overheating effects caused by harmonics generated by nonlinear (non-sinusoidal) loads. These loads include computers, laser printers, copiers and other office equipment, as well as video monitors and other electronic equipment. 

480V to 208/120V standard150° or 115°C temperature rise available Copper windings and terminals standard CSL-3 2007 Final Rule efficiencies levels increased efficiencies help to gain LEED points

Product Version: Unknown

1125 Downloads

Download: http://offecct.bimobject.com/Green_Divider 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

GREEN DIVIDER provides a way to incorporate greenery into office environments, open spaces as well as the possibility to create spatiality. The design of GREEN DIVIDER is flexible and can be placed in different formations or stand alone. The attractive graphic form of GREEN DIVIDER means it works perfectly well with smaller plants, or even without any greenery.

Product Version: Revit Architecture 2014

90169 Downloads

CERAMICIRCUIT™ HEATERS – LAY-IN

High Efficiency Ceramic Infrared Panels

The CeramiCircuit™ Lay-In Ceiling Heater is ideal for institutional and commercial application where acoustical tile ceilings exist. Install a few units to address a cold spot, or use them as the primary heat source in an office.

Radiant Electric Heat

Product Website: http://electricheat.com/products/ceiling-heater-lay-in/

Product Cutsheet: http://electricheat.com/wp-content/uploads/2015/09/1624CL-Cut-Sheet-9.2015.pdf

3-Part Specification: http://electricheat.com/wp-content/uploads/2015/09/238330-REH3-part-Specification-9.30.2015.pdf

Submittal Sheet: http://electricheat.com/wp-content/uploads/2015/09/Ceiling-Submittal-Sheet-9.2015.pdf

Operation Manual Installation Instructions: http://electricheat.com//wp-content/uploads/2013/12/1624CL-Drop-In-OM-WEB1.pdf

No Rating

Product Version: Revit Architecture 2012

625 Downloads

Kranplatt 300 is the most basic variant of our lift platform. However it is not lacking in anything comparing to other products we offer. Our basic is still the top quality. In this platform we focused purely on functionality and affortableness. This is why we minimalised its design to the most simple solutions to make it easier for you to use and to make it lighter to your pocket. Whether you need a lift platform to your office or your private estate, Kranplatt 300 is a perfect choice.

K 300 available size:

250 - 560

560 - 810

810 - 1060

1060 - 1310

1560 - 1810

1810 - 2060

2060 - 2310

2310 - 2560

2560 - 2810

2810 - 2999

No Rating

Product Version: Revit Architecture 2020

651 Downloads

Contents:

Cabinet with  doors

• Dimensions are parametric, depth, height, width, handle placement


• Materials: cabinet, door, handle

Cabinets Drawers

• up to five drawers with visibility


• dimensions are parametric; depth, height, width, drawer height


• drawers automatically drop down 5 mm under the above drawer this is fixed at the moment a new version might get this dynamic.


• Materials are parametric

Plinth

• Parametric dimensions (instance) material parameter.

Worktop L shape (with/without sink)

• Lengths, depths, heights, and thickness all instance parametric

Worktop I shape (with/without sink) Lengths, depths, heights, and thickness all instance parametric

Misc parts face based

1. Stove electric: fixed dimensions, parametric materials (4 or 5 cooking pits with visibility parameter)


2. coffee machine based upon Phillips Coffee pad machine: fixed dimensions, parametric materials


3. coffee mug: fixed dimensions, parametric materials


4. Microwave; fixed dimensions, parametric materials


5. faucet: fixed dimensions, parametric materials based upon an old Sphinx one

Misc generic model

1. Sink: parametric (instance) dimensions and height based upon floor height.

For any qeustions, 'bugs' etc. contact me by personal message

disclaimer: first family, some stuff might seem odd but strangely it works, next version will probably tone down on the parameters a bit.

Notice: Everything under constraints is calculated and should be left alone.

standard sizes based upon measurements from the netherlands, but can be adjusted to match your own.

Need another Revit version? Sadly Revit doesn't support saving back to previous versions. I can, however, create an IFC which can be imported. This might break the information contained within. Rendering the model useless. I'm sorry for this.

No Rating

Product Version: Revit Architecture 2016

3161 Downloads