These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.

4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

84 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.

4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

70 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.

4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

78 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.

4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

131 Downloads

Here are two Viewports:

1. Viewport Std. - with following Type Parameters:

a. Title – View Title.

b. Show Title – Yes.

c. Show Extension Line – Box checked.

2. Viewport W/ Box - with following Type Parameters:

a. Title – View Title- Detail Box.

b. Show Title – Yes.

c. Show Extension Line – Box not checked.

Place Detail Boxes: using place a drafting view as the example.

1. Load the View Title-Detail Box and Detail Box into a project.

2. Create a drafting view “DOOR FRAME” for example and drag onto a sheet.

3. Click that detail, in the Properties window, click the down arrow on the right, two Viewport types will be shown. Click “Viewport W/ Box”. Double click the detail to activate that View, on the bottom of the option bar selecting the proper scale.

4. Now placing the Detail Box, in the Project Browser, under “Family”/ “Annotation Symbols”, click “Detail Box” and expand the family types,    select 3x3 for example, drag and place it to the right location on the sheet using the grid marks on the border or the invisible grids on the sheet,    then drag the “DOOR FRAME” detail into the detail box, then drag the detail title to the correct location.

5. If the detail box type for example 8x10 is not on the list, you can select any type such as 3x3, click it then in “Type Properties” using “Duplicate” to create the new type “8 X 10”, then in the “Type Parameter”, “Other”, in the Row X, click 3, then an up/down arrow will be shown on the right, using    it to change to 8, then do the same for the Y, now you have the Type 8 X 10.

 Sorry, haven't upload for a while. The site said that I can upload 10 files maximum, I had upload only two of three, the image file and the empty box family, and don't know why the View Title didn't upload.I tried again and no avail. I have to create another new upload for the View Title.

No Rating

Product Version: Revit Architecture 2015

4455 Downloads

MIFAB Series MI-G-L-SDH ____ sanitary acid resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: removable baffle assembly and cross bar, internal deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, internal steel cone, flexible drawoff

hose and cap, hose clamp, line shut off valve and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s).

No Rating

Product Version: Unknown

141 Downloads

• This coffee table comes with 1/2 inch tempered glass with beveled edge


• One side of the glass and base is supported by high gloss chrome finish metal bar


• Dimensions: L 48" x W 26" x H 17"

Product Version: Unknown

5009 Downloads

SPECIFICATIONS

• coverage Pattern
  
  100˚ conical
  
  


• operatingfrequency range
  
  125 Hz - 18 kHz +/- 3dB88 Hz - 20 kHz - 10dB
  
  


• continuous output
  
  117 dB SPL
  
  


• peak output
  
  123 dB SPL
  
  


• sensitivity
  
  88 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in free space
  
  


• driver complement
  
  one 8" coaxial
  
  


• dimensions
  
  10 x 10 x 10.5 inches
  
  


• weight
  
  22.5 lbs
  
  


• Rated Impedance
  
  8 Ohms
  
  


• Power Rating
  
  200 W continuous, 400 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/loud-speakers/synergy-horn/sh-mini/
  
  

No Rating

Product Version: Unknown

392 Downloads