Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

5528 Downloads

An induction hot plate modeled loosely on Duxtop's. Not parametric.

2.5" high, 11.5" wide, 13" deep.

Control panel decal not included with family.

Meant to sit on top of a countertop and act like a mini portable stove. Enjoy!

No Rating

Product Version: Unknown

925 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

12119 Downloads

Modern Shower rose, adjustable in height, bar length & tap position, based on Kohler design.  Not totally squared away may have problems with height position

No Rating

Product Version: Revit Architecture 2009

2839 Downloads

Series LFSL100XL, LFL100XL, LFLL100XL and LFLLL100XL Lead Free* Extended Shank Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. They feature an extended shank for installation on water heaters with extra thick insulation as well as a Lead Free* brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model LFSL100XL is suitable for water heaters with up to 1-3/4 in. (45mm) of insulation. Model LFL100XL is suitable for water heaters with up to 2 in. (51mm) of insulation. Model LFLL100XL is suitable for water heaters with up to 2-1/2 in. (64mm) of insulation. Model LFLLL100XL is suitable for water heaters with up to 3 in. (76mm) of insulation. Series LFSL100XL, LFL100XL, LFLL100XL and LFLLL100XL are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

90 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

7535 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

10756 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

6803 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

11887 Downloads

Power Tower Pull up Station based on the dimensions of the X-Factor Pull Up Station Chin Up and Dip with Sit Up Bar VKR. 5 Adjustable height setting in both Inches and based on the settings of the original pull up station.

No Materials

Product Version: Revit Architecture 2020

4073 Downloads

Wood dining room set with adjustable heights.  Preset types with 30" standard height, 36" counter height, and 42" bar height.  Materials are also adjustable.

Enjoy!

Product Version: Revit Architecture 2014

18883 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.  Designed for a home work shop.

Product Version: Revit Architecture 2015

21081 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

No Rating

Product Version: Revit Architecture 2015

6335 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

644 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

356 Downloads

This is my most ambitious family yet.

This ADA-compliant countertop and sink(s) was made to solve frustrations in our office that there were no functional and flexibile families to meet generic bathroom sink and countertop needs.

This accomplishes that, I feel.

User can specify length of the countertop, materials, and up to four sinks or as few as zero.  

 Sink locations space automatically to fill the surface, depending on how many sinks are visible.  If for some reason you'd like the sinks to be asymmetric, a "shift sink" field is avaiable in the properties bar.

Product Version: Revit Architecture 2014

37447 Downloads

Kitchen Island utilizing 45 degree angles. This uses standard Revit cabinets.

42" Standard Bar Height.

Material Parameters exist for Countertop Material, Wall Material, and Brace Material.

Includes "Defy 600 Hob and under counter oven" uploaded by Cassie

Defy 600 Hob and under counter oven

Product Version: Revit Architecture 2013

28393 Downloads

Shuffleboard table, 10'-4" length (8'-8" playing surface length).  Parameters control materials and puck on/off visibility.

Dimensions are not parameter controlled.  Based on dimensions of Indio metal outdoor shuffleboard table from Pottery Barn. Felt color is blue.  

https://www.potterybarn.com/products/indio-metal-shuffleboard-slate-mp/?pkey=cgame-tables

Keywords: Shuffleboard, puck, bar game, game

No Rating

Product Version: Revit Architecture 2020

3160 Downloads

A standard size pool table (8' standard size = 44"w x 88"l playing surface).

The materials can be controlled by parameters.  Visibility of the pool cue and balls can be controlled by parameters as well.  A 3'-6" play area clearance is built in as well, and can also be controlled for visibility.

The model is not currently set for the table size to be parameter controlled, and if you adjust the size it'll get wonky. 

BUT!  If you're looking for that standard size pool table, this could be the one for you.  I'll try to upload a better version later with adjustable size parameters when I get the chance to update this one.  

Pool table, snooker table, bar games, billiard, billiards

Product Version: Unknown

21803 Downloads

Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. It consists of a bronze (1/2 to 2 in) body construction that is easy to maintain and service. Series 007 is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

416 Downloads

Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. They have a bronze (1/2 to 2 in.) body construction that is easy to maintain and service. Series 007 is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

247 Downloads

Manufacturer: Ametco Manufacturing Corporation.URL: www.ametco.com 

Fully parametric V-blades louver. Adjustable Width, Number of Blades, automaticaly calculated Hight. According to manufacturer blade design, 15 types of color, textured, 100% and 80% visual screening. Family type catalog included.

The fixed louver Venetian Design allows up to 100% visual screening in any direction and still allows airflow for ventilation. The Venetian Design has V-shaped extruded aluminum main bar welded to extruded aluminum framing bars. After fabrication Venetian design is polyester powder coated for long lasting maintains free beauty.

Product Version: Revit Architecture 2012

6111 Downloads

Series LF4001E Lead Free* Dielectric Unions feature a female iron pipe thread to solder connection. Compliant to American Society of Sanitary Engineering ASSE Standard 1079-2005. These unions are designed to be installed between pipe made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. Maximum Pressure: 250psi (17.2 bar). Maximum Temperature: 180°F (82°C)

No Rating

Product Version: Revit MEP 2014

100 Downloads

Series LF3006 Dielectric Unions feature a female iron pipe thread to female iron pipe thread (black). These unions are designed to be installed between pipe made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. The LF3006 features Lead Free* construction to comply with Lead Free* installation requirements. Maximum Pressure: 250psi (17.2 bar).

No Rating

Product Version: Revit MEP 2014

233 Downloads

Series 007DCDA Double Check Detector Assemblies prevent the backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. They incorporate a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. The compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Unknown

693 Downloads

Series 709DCDA Double Check Detector Assemblies prevent backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. It incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. Its compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

548 Downloads

Series 774 Double Check Valve Assemblies prevent the backflow of polluted water from entering into the potable water supply. They have a compact construction and short lay length, ideal for retrofit installations. They feature a lightweight stainless steel body and low head loss. Series 774 is ideal in applications identified by local authorities as non-health hazard. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

514 Downloads

ROCA

Application space: Bath

Reference: 5A9743C00

Index: Home > Products > Faucets > Shower columns > Shower column

Style: Loft

Description: The avant-garde design and the technology blend together to create strong and high-quality elements. This design is a timeless, singular and unalterable style proposal with a refined finish and the originality of its contours fill every space with elegance, precision and distinction.

Faucet: Included

Finish: Chrome

Handshower: Included

Installation type: Wall-mounted

Minimum water pressure required(bar): 2

Mixer type: Twin lever

Number of water outlets: 2, Shower flexible supply hose included 

Shower head function: Rain 

Suitable for: Shower

Product Version: Revit Architecture 2012

123255 Downloads

• MODERN INDUSTRIAL PENDANT LIGHTS: Inspired by refracted light, this elegant hanging lamp is made of 3 layer high quality metal with beautiful matte black lampshade, golden inside, which allows light reflects from multiple angles, create a attractive refracted lighting.


• ADJUSTABLE HANGING LIGHTING FIXTURE: Adjustable wire max to 47.24 inch, ideal for customizing different lighting needs and desired look. Overall dimension: 12.8” x 12.8” x 16.93” (L x W x H), Ceiling Canopy: 4.72" Dia.


• HARD WIRED: Requires 1 x E26 T12 or E26 T10, MAX 8W (Bulb NOT included), Suggested light bulb - E26 T12 MAX 8W frosted bulb.


• EASY TO INSTALL: This metal pendant lighting can be installed on flat or sloped ceilings, includes all mounting hardware for quick and easy installation.

No Rating

Product Version: Unknown

4478 Downloads

Series 709DCDA Double Check Detector Assemblies prevent backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. They incorporate a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. Their compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

302 Downloads