Glass Sconce with exposed bulb. Edison bulb. Black Finish. Industrial. Farmhouse Fixture. Bar lighting. 

No Rating

Product Version: Revit Architecture 2018

14698 Downloads

Standard parking lot bumper, parametric for length and height.  Set as concrete but can be changed to any color/material.  Two reinforcing bar attachments included.

Product Version: Revit Architecture 2018

16597 Downloads

Series LF100XL Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. They feature a Lead Free* copper alloy body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model LF100XL-8 is also available with 8 in. (200mm) extension thermostat. Series LF100XL is ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

125 Downloads

Parametric Beer Can. No lables and made from a simple revolve. This is ideal for interior elevations of a bar but is not a highly detailed model. It does not have a lable. 

Instance based parameters control the size of the can for either 12oz or 16oz

No Rating

Product Version: Revit Architecture 2016

547 Downloads

Series LF53L Lead Free* Poppet Type Pressure Relief Valves are used for protection against excessive pressure on domestic storage tanks or tankless water heaters. Model LF53L has the same basic design as Model LF3L except it is furnished in 1/2 in. (15mm) size and does not comply with ASME requirements. Pressure range is 75-150psi (5.2-10.3 bar). Series LF53L comes in standard settings of 75, 100, 125 and 150psi (5.2, 6.9, 8.6 and 10.3 bar). These pressure relief valves are popularly used in conjunction with the Model LF210 gas shutoff valve on gas water heaters to shut off gas to heater if water heater temperature exceeds 210 degreeF (99 degreeC). The LF53L features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

344 Downloads

This is a flatware rack and dolly family for behind your bar/in your kitchen. I based it off of similar items from Vollrath. I also have just the flatware rack if you just want that.

Product Version: Revit Architecture 2016

1817 Downloads

Parametric Dining Table.  Chairs and bar chairs are also uploaded under my profile.

I'm sorry, but I only have Revit 2013. I cannot upload this file as an earlier version.

Product Version: Revit Architecture 2013

24746 Downloads

This is a basic security storm door with no screen or number of bar control. It does not cut the wall but allows you to place it in front of an existing door. There is an option to open the door 90 or 180 degrees in plan view.

Product Version: Revit Architecture 2012

13974 Downloads

My first try at making a family. I needed a cigar box for a bar project I was working on so I made one myselt and made copies for different cigar brands.

-Has 9 cigars, made from rosewood, velvet and decaling.

Thanks.

Product Version: Revit Architecture 2011

3485 Downloads

This is a decorative mirror used in restaurants bar etc.

No Rating

Product Version: Unknown

5822 Downloads

Series LF1L, LF1XL Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. They feature an all Lead Free* copper silicon alloy body with NPT threaded male inlet and NPT threaded female outlet connections, unique thermostat with special thermo-bonded coating, and test lever. Series LF1L, LF1XL are CSA listed. Model LF1L has 2 in. (50mm) thermostat and a test lever. Model LF1XL has an extension thermostat. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

97 Downloads

A simple pull handle for cabinetry. In horizontal orientation. Chrome finish. Parametric length adjustment and multiple dimensioning references. 8mm round stand-offs and 12mm round main bar.

Product Version: Revit Architecture 2009

22274 Downloads

Series LF1L, LF1XL Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. They feature an all Lead Free* copper silicon alloy body with NPT threaded male inlet and NPT threaded female outlet connections, unique thermostat with special thermo-bonded coating, and test lever. Series LF1L, LF1XL are CSA listed. Model LF1L has 2 in. (50mm) thermostat and a test lever. Model LF1XL has an extension thermostat. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

118 Downloads

Series LF1L, LF1XL Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. They feature an all Lead Free* copper silicon alloy body with NPT threaded male inlet and NPT threaded female outlet connections, unique thermostat with special thermo-bonded coating, and test lever. Series LF1L, LF1XL are CSA listed. Model LF1L has 2 in. (50mm) thermostat and a test lever. Model LF1XL has an extension thermostat. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

100 Downloads

Single Exterior Aluminum Door with Two Sidelites and Crash Bar

No Rating

Product Version: Revit Architecture 2009

1785 Downloads

Parametric single fire escape door with with selection of ironnmongery including push bar

Product Version: Revit Building 8.1

11547 Downloads

This is a generic liquor dispenser I created for a bar I designed. I searched RevitCity at first but couldn't find anything so I created one and am sharing it with you guys enjoy! Bottles I got from RevitCity!

Product Version: Revit Architecture 2015

5523 Downloads

Width: 83'-0"

Length: 68'-0"

Depth: D6', S3'-6"

"D" stands for the deepest end and "S" stands for shallowest end.

The pool is a generic pool. 

It has a round pool bar and a pool island with a hot-tub in it and still large enough to put beach chairs on.

Product Version: Revit Architecture 2015

47027 Downloads

5 Tap Beer Tower

Brass finish with instance based option to turn off tap handles. 

Omniclass No. 23.40.40.14.24.11

Bar Equipment

Family Catagory= Specialty Equipment

Product Version: Revit Architecture 2016

7623 Downloads

Boat and Trailer - All materials are listed under BandT for easy location and changing of materials

UPDATE CONTENT: Parametric Settings: Ski bar and Boards on/off, Trailer on/off

FILE TYPE: Revit 2012 64 bit

Product Version: Revit Architecture 2012

18947 Downloads

This is the K-Series Bar Joist-Rod Web.rfa with extended ends that act independently and show up on course plan views.  I have changed nothing but two dimension parameters in this file. Everything else is as AutoDesk designed and shipped it with Revit Suite 2014.

No Rating

Product Version: Unknown

4475 Downloads

I revised what Chilimac had uploaded. This is a kitchen island that has a bar with stools and a sink and dishwasher. 

Product Version: Revit Architecture 2009

111300 Downloads

Kitchen Island utilizing 30 and 60 degree angles. This uses standard Revit cabinets.

42" Standard Bar Height.

Material Parameters exist for Countertop Material, Wall Material, and Brace Material.

Product Version: Revit Architecture 2013

26308 Downloads

Series LF40L, LF40XL Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature a Lead Free* brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model LF40L has a short thermostat for installation directly in available tank tapings. Model LF40XL has an extension thermostat for installation in the hot water outlet within the allowable distance from the top of the tank. Series LF40L, LF40XL valves are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

173 Downloads

Series LFLL40XL, LFLLL40XL Extended Shank Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature an extended shank for installation on water heaters with extra thick insulation as well as a Lead Free* cast copper silicon alloy with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model LFLL40XL is available in sizes 3/4 and 1 in. (20 and 25mm). Model LFLLL40XL is available in size 3/4 (20mm) with an extra long extended shank. Series LFLL40L, LFLLL40XL valves are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

89 Downloads

8 in 1 Revit family to save you time from downloading each of the equiptment. Pommel Horse and Parallel Bars has landing mat which can be turn off.

Equipment are Ring Tower, Uneven Bars, Single Bar, Vault, Inground Trampoline, Pommel Horse, Parallel Bars and Bnlance Beam.

Enjoy.

Product Version: Revit Architecture 2018

6997 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

No Rating

Product Version: Revit Architecture 2015

7511 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

6073 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

9640 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

8910 Downloads