Metal Prefab fireplace in various standard sizes.

Product Version: Unknown

3288 Downloads

This is a parametric railing made out of metal piping, although you can change the material. You can choose whether the middle railing exists. You can change the length, height, diameter of piping, distance from the end supports to the middle supports, and how many middle supports to get it just how you like. It is face based so you can put it anywhere

I saved a couple diameters and materials for you but you can make your own. 

Product Version: Revit Architecture 2016

12619 Downloads

Instance-adjustable dimensions, with two types preset for frame materials (wood and metal). Edit the type options to change materials.

Creates the necessary opening in the roof, and shows a very simple non-operable skylight. Doesn't have fancy construction details.

Created as a generic component, so insert into your model via components menu rather than windows menu. 

Product Version: Revit Architecture 2010

25853 Downloads

L-Shaped Glass-topped computer desk. Meant to be metal body with glass top; however, those elements are parametric so any material can be assigned. The desk is not parametric in size.

No Rating

Product Version: Revit Architecture 2013

4400 Downloads

Single hollow metal framed exterior door with half lite. Parameters for frame depth and 2" vs 4" head

Product Version: Revit Architecture 2008

11121 Downloads

Metal Stairs and Railings. This is good for industrial applications and commercial. This is a Rvt file. You will need to copy and paste. Some of these railings may not meet some codes. It can be modified. Made by Jeff Rath www.3dentourage.com

Product Version: Revit Architecture 2012

13424 Downloads

Recreation of the 200559 - 8in Diamond Mini Pendant from Meyda lighting.  Overall length (ceiling to bottom of pendant body) is parametric to adjust hanging height.  Set materials for the mica shade and metal frame.

Made this for my wife who is an interior design student.  Hopefully it helps some other people out there.

Product Version: Revit Architecture 2017

1297 Downloads

Series 909RPDA Reduced Pressure Detector Assemblies prevent the reverse flow of fire protection system substances from being pumped or siphoned into the potable water supply. The 909RPDA incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. It consists of an epoxy-coated cast iron body with stainless steel trim, bronze gate valves, a pressure-differential relief valve, shutoff valves, and bronze ball-type test cocks. Series 909RPDA provides maximum flow at low pressure drop utilizing the "air-in/water-out" design principle for protection during emergency combined backsiphonage and backpressure conditions. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

636 Downloads

Aviator wing desk as seen on www.restaurationhardware.com

"Inspired by streamlined World War II fighter planes, our desk is a shining swoop of metal, its shape mimicking the bent wing of a plane. Poised as if for take-off, it features a polished aluminum patchwork exterior accented with steel screws, built around a solid hardwood frame. 3 canvas-lined shelves offer ample storage."

Revit 2012

Product Version: Unknown

9583 Downloads

Fully adjustable metal building rigid frame with optional eave extensions.

Product Version: Revit Architecture 2010

4736 Downloads

Discera Solar offers a sleek architectural form in a solar powered configuration featuring a 39 watt metal halide light source with well defined IDA certified "Dark Sky Friendly" Full Cutoff optics. Engineered to achieve many years of low maintenence, self-contained performance. Sealed gel batteries and "smart controller" held aloft in a PVC easy access compartment.

Product Version: Revit Architecture 2010

17454 Downloads

Saturn 2 Cutoff /Full Cutoff meets evolving design trends for the most demanding environmental and legislative challenges. High quality construction, excellent performance in a full cut-off configuration! Saturn Cutoff uses T6 ceramic base metal halide lamps from 35 to 150 watts, with IDA certified "Dark Sky Friendly" full cutoff rotation symmetrical and asymmetrical distributions available.

Product Version: Revit Architecture 2010

2163 Downloads

Gun metal vent hood with built in lighting. Both hood and ductwork height is adjustable. Materials adjustable as well, just make sure you assign the vent lights to the "Light Filter" material before rendering.

All parameters should be instance parameters.

WARNING: Not a ceiling based model, so you will need to adjust duct height versus hood height.

Product Version: Revit Architecture 2015

27068 Downloads

My best recreation of the Sargent Chandel-Air from Meyda.  54" round, diffuser body, metal trim, fan blades, fan body materials can be set.  Only shaft length (to adjust hanging height) is parametric.

Made this for my wife who is an interior design student.  Hopefully is helps some others out there.

No Rating

Product Version: Revit Architecture 2017

462 Downloads

Cadeira Santorini - Tessaro

http://www.tessaromoveis.com.br/produto/cadeira-em-corda-nautica-santorini/

** Tecido, corda naval e metal.

key words: chair, exterior chair.

by: Privm

No Rating

Product Version: Revit Architecture 2016

825 Downloads

Saturn Cutoff/Full Cutoff meets evolving design trends for the most demanding environmental and legislative challenges. High quality construction, excellent performance in a cut-off or full cut-off configuration! Saturn Cutoff uses T6 ceramic base metal halide lamps from 35 to 150 watts, with IDA certified "Dark Sky Friendly" full cutoff rotation symmetrical and asymmetrical distributions available.

Product Version: Revit Architecture 2010

2712 Downloads

White painted metal electrical meter box

wall hosted

has adjustable cavity void for Height and Width for User prefs for trim opening adjustment if desired

Not seen in plan, has icon graphic that is instance / manually adjustable distance from wall

 icon graphic matches local Aus and NZ standards so wil match up approx with Legends etc.

Product Version: Revit Architecture 2013

6211 Downloads

Kohler - K-6582 Park Falls™ Laundry Sink, 20" x 21", Tile-in / Metal Frame

No Rating

Product Version: Unknown

6073 Downloads

Fully parametric Eave Purlin for a Pre-Engineered Metal Building.  Options to change Depth and roof Pitch in Type Properties.  Inspired by "Eave Strut" detail by danpecor and "Zee Purlin" beam by dylan88.

Product Version: Revit Architecture 2011

7017 Downloads

Modelled similar to metal Hydestore longrun shelving unit, this floor hosted generic model family is parametric in height, depth & width.  Materials are type parameters, height is an instance parameter.  3D model not shown in Plan views or Coarse & Medium.  Shown as a grey dashed line on Floor Plans.

Product Version: Revit Architecture 2010

16542 Downloads

The Extensive range of Lynx Ottoman and Bench collection seating with contemporary linear lines yet featuring all the safety features required for challenging environments. Reinforced frame with plywood skinning where possible, including plywood under bottom. Anti-tamper security fixings including use of non-retractable screws and no visible staples.

No Rating

Product Version: Unknown

20526 Downloads

Modelled similar to metal Hydestore four post shelving unit, this floor hosted generic model family is parametric in height, depth & width.  Materials are type parameters, height is an instance parameter.  3D model not shown in Plan views or Coarse & Medium.  Shown as a grey dashed line on Floor Plans.

No Rating

Product Version: Revit Architecture 2010

9878 Downloads

Simple line-based covered parking canopy based off of off-the shelf system.  Parameters for roof material, structure material, number of columns (all will be equally spaces), and offset of columns left and right from edge of canopy.

This family has some customization, but if you have odd parking stall counts the equal column spacing may not meet your needs.  

Enjoy!

Revit 2019

Keywords: Parking, Structure, Canopy, Steel, Metal, Covered, Car, Truck

Product Version: Unknown

18679 Downloads

One Nested Door having 2 Frames & 2 Leaves Make more than 100 TypesMulty lite varies 1Vx1H to 10Vx4H &Lites can be Glass or solid, 2ndry Frame width can be zeroVent Ht can be zero for door without Vent.Flush door can be panel door by inputing Mould depthSingle Rebate Wooden door frame can be change to double RebateHollow Metal door frame is double rebate onlyMaterial of different parts of door can be differentOperable 2D swing represent corresponding Leaf type3D swing is also operable, Grill Y/N in Vent

Product Version: Revit Architecture 2013

17430 Downloads

Posi-Joist parametric, standard PS10 251x96x46mm

posi-strutt, floor truss, easijoist, posijoist, mittal, wolf system, metal web joists, floor joists, joist, wood joist

parametric, minimum length between walls 692 mm

length between 693 and 1292 mm overlapping web

length above 1292mm array divides length by 600mm

overlap over walls parameters 0mm-width of wall

No Rating

Product Version: Revit Architecture 2020

819 Downloads

AGRV_GENM-SPCQ_FloodControlGate-Double_防水閘門-雙

Flood Control Gate in basement driveway entrance in Taiwan (Double swing) with DIM & Material parameters and dimension Guide

I also add a void box so you can easyly insert it in a wall

Visit our website AgileRevit.com for more families

No Rating

Product Version: Revit Architecture 2018

319 Downloads

AGRV_GENM-SPCQ_FloodControlGate-Single_防水閘門-單

Flood Control Gate in basement driveway entrance in Taiwan (Single Swing) with DIM & Material parameters and dimension Guide

I also add a void box so you can easyly insert it in a wall

Visit our website AgileRevit.com for more families

No Rating

Product Version: Revit Architecture 2018

321 Downloads

Minimalist generic round downlight/uplight/wall light

Why this lamp?

* mounts on all surfaces (ceilings, floors, walls, objects, etc.)

* optional lens and diffusor

* recess parametrizable (any distance from surface, incl. surface mounting)

* diameter and depth scalable in large ranges (depth down to 20 mm!)

* realistically rendering (metal reflector, dimmed diffusor when lamp off)* minimalist design

* all parameters thoroughly documented

* no junk parameters, well almost… :)

Product Version: Revit Architecture 2020

5315 Downloads

MIFAB Series MI-HEL ____ helicopter port fuel interceptor constructed from high-strength 1/4” (6) plate steel, ASTM-A242, outlet vent connection, internal vent connection, gasketed access covers fastened with stainless steel bolts, 2” (51) fuel drain connection, 1” (25) fresh water supply connection with gate valve, back flow preventer, automatic water level float valve, external sight glass water level indicator with drain cocks, 2” (51) interceptor drain plugs, channel support rails and body corner lifting lugs. Interceptor shall be coated with a two-part epoxy interior and exterior coating.

No Rating

Product Version: Unknown

137 Downloads

This is a profile for a corrugated mullion to make walls with corrugated metals.

To use the file load the profile into the project. Go to mullion and create a duplicate of the mullion and name it corrugated and select the profile you loaded in and set the material you want and click ok. Now Create a new curtain wall set the vertical grid to fixed distance and the spacing to 6-1/2" check the box for adjust for mullion size.

Set the horizonatl grid to none. Set the interior type vertical mullion to the mullion youy made. Now you are ready to draw currgated metal walls.

Renders perfectly and works for walls and roofs.

Product Version: Unknown

8943 Downloads