Here is a simple bar,

you can edit the family to add your own materials.

Bottel and glass stool is included

Please rate thanks

Product Version: Revit Architecture 2013

1282 Downloads

SERGIO Unica 1 1/2 Bowl Only

Overall Measurements: 625x495

Bowl 1: 355x405x180mm

Bowl 2: 155x300x110mm

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

1046 Downloads

Ludwig Mies van der Rohe's use of tubular steel was an influence from Marcel Breuer. This was apparent in his design of the MR Chaise Lounge. Inspired by the possibilities of this material, Mies incorporated chrome tubular steel in furniture design, mixing it with traditional fabrics like leather. He often employed cantilevers and delicate structural frames to create a feeling of lightness. During his time, he collaborated with interior designer Lilly Reich, who was also his companion.

Quote from Mies: "Architecture is a language, when you are very good, you can be a poet".

http://www.littledetailscount.com/

Product Version: Revit Architecture 2011

14735 Downloads

Here it is folks, an Ionic Column based on the one available here on RevitCity for so many years.  But this one acts just like normal columns, with Base and Top level parameters to define the height, and the column itself scales properly based on that height.

 Thanks to this blog post on how to make this work: http://domokurarchitects.blogspot.com/2013/01/revit-tip-scalable-model-family.html

Product Version: Revit Architecture 2013

11320 Downloads

Robert Abbey Shinto Tripod Floor Lamp 62.5" H X 24"W

Parametric Materials

http://www.ylighting.com/robert-abbey-2171.html

Product Version: Unknown

14641 Downloads

Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. They have a bronze body construction (1/4 to 2 in.) or FDA approved epoxy coated cast iron (2 1/2 to 3 in.), two in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

343 Downloads

SERGIO Cameo 1 1/2 Bowl and Drainer

Overall Measurements: 1080x500mm

Bowl 1: 355x405x170mm

Bowl 2: 200x300x150mm

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

1961 Downloads

SERGIO Ansa Single Bowl and Drainer

Overall Measurements: 780x480mm

Bowl 1: 330x380x170mm

Bowl 2: -

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: Basket Waste and Overflow Kit, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

8805 Downloads

SERGIO Ansa 1 1/2 Bowl and Drainer

Overall Measurements: 980x480mm

Bowl 1: 330x380x170mm

Bowl 2: 200x300x170mm

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

4835 Downloads

SERGIO Ansa 1 3/4 Bowl and Drainer

Overall Measurements: 1080x480mm

Bowl 1: 330x380x170mm

Bowl 2: 278x278x170mm

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

3276 Downloads

SERGIO Leda Laundry Bowl 1

Overall Measurements: 600x500mm

Bowl 1: 525x420x240mm

Bowl 2: -

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: Basket Waste and Overflow Kit, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

2438 Downloads

This door has the capability of having 2 to an infinite amount or door panels. There is a parameter allowing for you to change the distance of the door to the exterior side of the wall.

Hope it helps,

smh

Product Version: Revit Architecture 2014

2041 Downloads

LANTLIV

Plant stand, white

Product Version: Revit Architecture 2014

1309 Downloads

Telephone, desk type. A fully Revit model. Appears correctly in 3D Hidden Line views without excessive tessalation.

Product Version: Revit Architecture 2016

7583 Downloads

MIFAB® Series F1100-C-RS lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and “RS” (specify size) rectangular (specify material finish) strainer. (For non-membrane

floors, use MIFAB F1100-RS Series.) Please note 5”x17” sized strainer available in stainless steel only. For RS48, grate style is different compared to larger model.

No Rating

Product Version: Unknown

219 Downloads

Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of bronze body construction (1/4 to 2 in., 8 to 50mm) or FDA approved epoxy coated cast iron (2 1/2 to 3 in., 65 to 80mm), two, in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

435 Downloads

SERGIO Ansa Double Bowl Single Drainer

Overall Measurements: 1380x480mm

Bowl 1: 330x380x170mm

Bowl 2: 330x380x170mm

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

Product Version: Revit Architecture 2011

4340 Downloads

SERGIO Cameo Single Bowl and Drainer Narrow

Overall Measurements: 950x420mm

Bowl 1: 480x355x170mm

Bowl 2: -

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: Basket Waste and Overflow Kit, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

1939 Downloads

SERGIO Cameo Single Bowl and Drainer

Overall Measurements: 800x500mm

Bowl 1: 355x405x170mm

Bowl 2: -

Material: 304 Grade Stainless Steel

Gauge: 0.8mm

Internal Bowl Radius: -

Suppliedwith: Basket Waste and Overflow Kit, Sealing Tape, Fixing Clips

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

1902 Downloads

For some reason I can't update this file but you will notice the back appears to be missing if you are in course or medium detail level in your project. This is easily corrected in the family element visibility settings or just make sure your project view is set to fine detail level.

And for anyone that doesn't know how to place a face-based family in your project go here...

For more great, high quality Revit components go HERE!

Product Version: Revit Architecture 2012

6834 Downloads

SERGIO Urbane 1/2 & Standard Bowl Only

Overall Measurements: 650x450mm

LH Bowl: 170x400x140mm

RH Bowl: 400x400x200mm

Material: 304 Grade Stainless Steel

Gauge: 1.2mm

Internal Bowl Radius: 25mm

Suppliedwith: 2 x Basket Waste and Overflow Kits, Timber Preparation Board, Stainless Steel Colander

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

398 Downloads

SERGIO Urbane Large & 3/4 Bowl Only

Overall Measurements: 925x450mm

LH Bowl: 500x400x200mm

RH Bowl: 340x400x200mm

Material: 304 Grade Stainless Steel

Gauge: 1.2mm

Internal Bowl Radius: 25mm

Suppliedwith: 2 x Basket Waste and Overflow Kits, Timber Preparation Board, Stainless Steel Colander

FREEPHONE:  0800 222 764

WEB: www.cabro.co.nz

EMAIL: info@cabro.co.nz

The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.

No Rating

Product Version: Revit Architecture 2011

930 Downloads

MIFAB Series C1500 deck cleanout, nickel bronze body with round, scoriated secured cover.

No Rating

Product Version: Unknown

121 Downloads

This object is useful for break waves..Work Plane Based...Surya Consultant, Tual

Product Version: Revit Architecture 2008

4653 Downloads

Not parametric, but a good jumping off point! I made it wall based.

Product Version: Revit Architecture 2020

885 Downloads

Metric, non wall-based, parametric depth. Custom materials for easy adjusting.

Product Version: Revit Architecture 2012

5148 Downloads

Generic plane based model. There a few family types for different sizes and colors

No Rating

Product Version: Revit Architecture 2011

18402 Downloads

Generic floor based component. Various size rings and balls.

No Rating

Product Version: Revit Architecture 2011

17548 Downloads

Dimensions are Based on Kahramaa Qatar.

No Rating

Product Version: Revit MEP 2019

1773 Downloads

2" Air Foil with parametric width - wall based.

Product Version: Revit Building 9

5893 Downloads