ACO linear drainage system, produced by ACO DRAIN A/S, Denmark.

Load class is defined according to DIN 19 580

Prices are in LTL, valid at year ~2000 (sorry, i have no newer data)

Family is based on Trench_drain.rfa file. This is a floor-based element.

No Rating

Product Version: Revit Architecture 2009

1724 Downloads

ANSI sheet size D as described in Module 02 on page UDS-02.8 through UDS-02.20 of the U.S National CAD Standard 2.0. For full NCS compliance consider changing the Revit Line Weights table to reflect the Line Weights listed in Module 04 page 04-14 of the NCS. This sheet size works well when plotted at half size on a typical laser jet printer using the ANSI sheet size of B 17 X 11.

Product Version: Unknown

3671 Downloads

This table lamp of grandiose proportions is lit with three 60-Watt clear Halopin bulbs. The satin white shade distributes light evenly above the lamp and a glass diffuser below the shade prevents glare..

Product Version: Revit Architecture 2011

8901 Downloads

Morning Peeps.....

My very latest creation and this ones a beauty!!

A 6 burner BBQ based on the Iowa 6 Burner Gas BBQ.

Dimesnions are H)107.5, (W)140, (D)56.7cm.

with a cooking area of  (W)77, (D)41cm.

Fixed in size as modelled based on this model but all materials are changeable. Looks rather good in an external render.

Hope you guys like it, i know i've said it before i'm too kind!!

Feedback and ratings welcome.

Cheers and enjoy

Product Version: Revit MEP 2014

25606 Downloads

A bentwood coat, hat, and umbrella rack of a type manufactured in the 1940-ties and 1950-ties. Two umbrellas families modeled and contributed by user felivedder. Visibility of both the umbrellas and the hat inserted families controlled by a yes/no parameter – you do not have to show them – modify parameters of an instance, or create new types with their visibility off. A set of types prepared with a number of materials. Hat materials controlled from the object instance.

No Rating

Product Version: Unknown

1720 Downloads

Product Version: Revit Architecture 2011

5110 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  33 Hz- 67 Hz - 3dB27 Hz- 150 Hz - 10dB
  
  


• continuous output
  
  121 dBSPL
  
  


• peak output
  
  127 dB SPL
  
  


• sensitivity
  
  95 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
  
  


• driver complement
  
  one 12" woofer
  
  


• dimensions
  
  24 x 15 x 24 inches
  
  


• weight
  
  83 lbs
  
  


• Rated Impedance
  
  8 Ohms
  
  


• Power Rating
  
  400 W continuous, 800 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/specialty-subs/cs30/
  
  

No Rating

Product Version: Unknown

489 Downloads

Arrayed Parametric TJI section. 2D Line based Detail Component. This family will keep the TJI at the set interval with the last one filling the reminder. (Preset interval is 16") The last TJI has a visibility toggle in the type properties. 

Sizes preprogramed 110, 210, 230, 360, and 560

 Hope it helps,

smh

No Rating

Product Version: Revit Architecture 2014

574 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  18 Hz- 100 Hz -3dB16 Hz -10dB
  
  


• continuous output
  
  122 dB SPL
  
  


• peak output
  
  128 dB SPL
  
  


• sensitivity
  
  95 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
  
  


• driver complement
  
  one 12" long excursion woofer
  
  


• dimensions
  
  87.5 x 18 x 20 inches
  
  


• weight
  
  220 lbs
  
  


• Rated Impedance
  
  8 Ohms
  
  


• Power Rating
  
  500 W continuous, 1000 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/specialty-subs/dts20/
  
  

No Rating

Product Version: Unknown

263 Downloads

I have created Jhali Block by using Adaptive component (curtain panel pattern based). Its completely adaptive, you can change the size of the pattern. If you want to see tutorial of this please visit: https://goo.gl/H18eKg      &                  http://goo.gl/Sp9ZFs                             Visit my website for more tutorials: http://www.revitmyway.com/

Product Version: Revit Architecture 2016

7973 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  44Hz-200Hz -3dB36Hz-200hz -10dB
  
  


• continuous output
  
  142 dB SPL
  
  


• peak output
  
  148 dB SPL
  
  


• sensitivity
  
  119 dBSPL @ 125 Hz (Referenced to 2.83V @1M 1⁄2 space, measured as 28.3V @ 10M)
  
  


• driver complement
  
  Four 12 inch Long Excursion
  
  


• dimensions
  
  50" X 50" X 18"
  
  


• weight
  
  277 lbs.
  
  


• Rated Impedance
  
  2 ohms or 2 x 4 ohms
  
  


• Power Rating
  
  4000 W continuous
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/bc-horns/bc412/
  
  

No Rating

Product Version: Unknown

413 Downloads

Product Version: Revit Architecture 2011

4652 Downloads

No Rating

Product Version: Revit Architecture 2011

3298 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  34 Hz- 300 Hz -3dB28 Hz - 400 Hz -10dB
  
  


• continuous output
  
  141 dB SPL
  
  


• peak output
  
  147 dB SPL
  
  


• sensitivity
  
  117 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
  
  


• driver complement
  
  two 18" long excursion woofers
  
  


• dimensions
  
  45 x 45 x 22.5 inches
  
  


• weight
  
  277 lbs
  
  


• Rated Impedance
  
  switchablea single 2 ohm loadortwo 4 ohm loads
  
  


• Power Rating
  
  3600 watts continuous 14,400 watt peak
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/dbh/dbh218/
  
  

No Rating

Product Version: Unknown

210 Downloads

No Rating

Product Version: Revit Architecture 2011

5100 Downloads

Product Version: Revit Architecture 2011

3278 Downloads

No Rating

Product Version: Revit Architecture 2011

3221 Downloads

Standared face based Toilet paper holder. Toilet paper visual can be turned on/off (instance based).

Revit 2015 

hope it helps 

Product Version: Revit Architecture 2015

42345 Downloads

'Face' based dry erase board.  I chose face based over 'wall' because someone might want to put this item onto a furniture system item, etc..

No Rating

Product Version: Revit Architecture 2008

5193 Downloads

The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line

No Rating

Product Version: Unknown

191 Downloads

The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line

No Rating

Product Version: Unknown

111 Downloads

Fully dynamic family of Titus TDC diffuser. This diffuser was designed to be an accurate representation of all sizes of this type shown in the 2004 Titus catalog. It is not an exact architectural model. It serves only as a tool for mechanical design to represent the diffuser and to carry all the applicable mechanical data realted to it such as airflow, size, throw, manufacturer, model, etc... (Some customization may need to be performed to coordinate the shared parameters used in the design of this model with your schedules.)

Product Version: Revit MEP 2008

2672 Downloads

Created to give a generic person shape in 3D with as little extraneous info as possible, but without looking clunky. No parameters.

No Rating

Product Version: Unknown

27 Downloads

Created to give a generic person shape in 3D with as little extraneous info as possible, but without looking clunky. No parameters.

No Rating

Product Version: Unknown

48 Downloads

Power Tower Pull up Station based on the dimensions of the X-Factor Pull Up Station Chin Up and Dip with Sit Up Bar VKR. 5 Adjustable height setting in both Inches and based on the settings of the original pull up station.

No Materials

Product Version: Revit Architecture 2020

4066 Downloads

This door has lots of parametirc options and most are instance based for flexibility.  You can change the size, frame, casings (on/off), panel configuration (glass or solid), handle, and material.  You can also show the door closed or opened (any  angle) in 3D as well as in Plan View (3D angle and plan angle do NOT have to be the same and are instance based).

Product Version: Unknown

8689 Downloads

Product Version: Revit Architecture 2011

3684 Downloads

Out of the box Revit Wide Flange family with spray on fireproofing added! After a long time of waiting to get to this, I finally did and decided to share because it seems unavailable anywhere else online. It appears to be a highly requested family throughout a lot of forums.

Parameters include, SOFP thickness, Visibility ON/OFF, & SOFP Realistic material. Family can be flexed and does not slow more complex framed structures significantly.

Visible in plan, 3D etc. Sections nicely as well. Great for wall firestopping & MEP coordination.

SOFP will adjust to any size beam selected and will also adjust to medium/fine detail level.

In order for this family to work properly, it’s imperative, the type catalog is located within the same folder as the family. I would suggest keeping them in the default directory together:

C:\ProgramData\Autodesk\RVT 2018\Libraries\US Imperial\Structural Framing\Steel

SOFP material JPG should be loaded into default materials directory as well:

C:\Program Files (x86)\Common Files\Autodesk Shared\Materials\Textures\3\Mats

Hope this is helpful and you enjoy for free! Family was created in RVT2018 but can be upgraded.

No Rating

Product Version: Revit Architecture 2018

860 Downloads

 Please tell me what you think so I can get better! .... I hope this family will be useful for you

Product Version: Revit Architecture 2014

1675 Downloads

 Please tell me what you think so I can get better! .... I hope this family will be useful for you

Product Version: Revit Architecture 2014

4178 Downloads