MIFAB® Series R1200-JC lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

61 Downloads

MIFAB® Series MC-27 water closet carrier with lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste and anti-crossover baffles for floor mounted back outlet water closets. Complete with adjustable 8”ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and side anchor tie down supports.

No Rating

Product Version: Unknown

42 Downloads

MIFAB® Series MC-62 floor mounted service sink carrier with two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet, and lacquered cast iron fitting with no hub waste and vent connection (specify size of each). Complete with lacquered cast iron faceplate assembly, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

27 Downloads

Low polygon entourage family of a typical bicycle in six different colors and two detail levels.

The naming of the family is based on the "FLIP Master Type List"

http://aiab.org/images/pdf/FLIP_Master_Type_List_V1.6.7.xls

Other documentation of the FLIP (Family Library Interchange Program)

http://aiab.org/index.php/flip-guideline

For further information, please visit Autodesk Industy Advisory Board (Hong Kong)

http://aiab.org/index.php/files

No Rating

Product Version: Revit Architecture 2016

1765 Downloads

Here is a file to have Door/Window/Gate schedule and associated door panels. the window was using door family template, the chain link fence was using curtain wall with gate.

Change Door tags:1. While placing the door, click “Tags” in the Option Bar,2. In “Loaded Tags And Symbols”, under “Doors” Category, click “Loaded Tags”, then, switch between “Door Tag-AAA”, and “Wdw Tag-AAA”.

To link parameters from a nested family to the host family you will need to do the following.1. Open the host family with the nested inserted.2. Click on the nested family.3. Click “Edit Type” in the Properties.4. The “Type Properties” window will be shown.5. Click the parameter that you want to associate with other parameter.6. Click the little button at the far right of the parameter line you want to change7. Select parameter out of list or click add parameter and recreate the parameter.When the parameter is linked there will be an (=) sign on the little button.

Make sure that the associated parameters are in the same Group, which means Text, or Dimension. If the parameter is a length, then it needs to have a value instead of 0’ 0”.

No Rating

Product Version: Revit Architecture 2015

1751 Downloads

MIFAB® Series MC-56 wall mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron adjustable wall plate with mounting studs and fixture leveling hardware

No Rating

Product Version: Unknown

55 Downloads

No Rating

Product Version: Unknown

29 Downloads

MIFAB® Series F1100-C-ZS lacquered cast iron floor drain with anchor flange and 1/8” (3) recessed, 13 1/4” (337) square elastomeric flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard reinforced 6” x 6” (152 x 152) square strainer. (For non-membrane floors, use MIFAB F1100-ZS Series.)

No Rating

Product Version: Unknown

68 Downloads

MIFAB Series MI-RICE sanitary powder epoxy coated inside and outside fabricated 10 gauge steel rice interceptor with flow rate of _____(indicate). Unit shall include: ½”(13) thick fixed primary straining baffle with 1/4” (6.4) holes and secondary ½”(13) thick removable straining baffle with 1/4” (6.4) holes, removable cross bar , securing bolt(s), stainless steel calibrated orfice plate, and steel powder epoxy coated non skid rectangular gasketed lid(s).

No Rating

Product Version: Unknown

45 Downloads

MIFAB® Series MHY-30 exposed type, self draining, moderate climate low lead wall hydrant with A.S.S.E. 1011 certified anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control the flow function, hardened bronze operating stem, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

195 Downloads

MIFAB® Series HY-3000-NPB exposed type, self draining, low lead, moderate climate wall hydrant with A.S.S.E. 1011 certified antisiphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control the flow function, hardened bronze operating stem, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

173 Downloads

MIFAB® Series MC-35 hanger plate and exposed arm lavatory carrier with two universal, adjustable, top support plates and three white, lacquered, adjustable, cast iron exposed support arms assembled to lacquered cast iron invertible and adjustable arm supporting brackets. Complete with three lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and mounting hardware.

No Rating

Product Version: Unknown

115 Downloads

MIFAB® Series MC-35 hanger plate and exposed arm lavatory carrier with two universal, adjustable, top support plates and three white, lacquered, adjustable, cast iron exposed support arms assembled to lacquered cast iron invertible and adjustable arm supporting brackets. Complete with three lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and mounting hardware.

No Rating

Product Version: Unknown

80 Downloads

No Rating

Product Version: Unknown

40 Downloads

No Rating

Product Version: Unknown

19 Downloads

MIFAB® Series Series R1270 combined large sump roof drain and secondary overflow system; consisting of 24” x 42 “ galvanized sump receiver, two lacquered cast iron roof drain bodies with 15” diameter anchor flange, cast iron waterproofing membrane clamp rings with integral gravel stop, one 4” ABS overflow standpipe and two self-locking polyethylene dome strainers with a combined free area of 250 square inches.

No Rating

Product Version: Unknown

729 Downloads

MIFAB® Series MHY-65 ____ (specify length) non freeze post hydrant with exposed bronze head and combination 3/4” (19) female and 1” (25) male inlet connection. Hydrant assembly complete with one piece neoprene plunger, hardened bronze operating stem, 1” (25) galvanized steel casing, heavy duty bronze head casting with head nut assembly, 3/8” (9) diameter galvanized steel operating rod, decorative casing guard, tapped 1/8” (3) drain port in the bronze tailpiece, and an operating key.

No Rating

Product Version: Unknown

62 Downloads

MIFAB® Series HY-6500-NPB ____ (specify length) non freeze post hydrant with exposed bronze head and combination 3/4” (19) female and 1” (25) male inlet connection. Hydrant assembly complete with one piece neoprene plunger, hardened bronze operating stem, 1” (25) galvanized steel casing, heavy duty bronze head casting with head nut assembly, 3/8” (9) diameter galvanized steel operating rod, decorative casing guard, tapped 1/8” (3) drain port in the bronze tailpiece, and an operating key.

No Rating

Product Version: Unknown

78 Downloads

MIFAB® Series MC-21 floor mounted single, horizontal, adjustable, water closet carrier without fitting, 4” (102) back outlet waste connection (specify no hub or threaded), lacquered cast iron adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support.

No Rating

Product Version: Unknown

25 Downloads

MIFAB® Series MC-34 single hanger plate and exposed arm lavatory carrier with universal, adjustable, top support plate and white lacquered, adjustable, cast iron exposed support arms assembled to lacquered cast iron invertible and adjustable arm supporting brackets. Complete with two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and mounting hardware.

No Rating

Product Version: Unknown

71 Downloads

MIFAB Series MC-10D-EXT double, horizontal, adjustable high rough-in water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste, 2" (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

50 Downloads

MIFAB®  C1100-RC Series adjustable floor cleanout with lacquered cast iron body and anchor flange, secondary “O” ring Test Seal, 4” diameter cleanout opening and round nickel bronze scoriated combined cover and plug top assembly with stainless steel vandal proof allen key screws, primary gasket seal and 1 ½” round stainless steel carpet marker. (For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

69 Downloads

MIFAB® Series MC-62 floor mounted service sink carrier with two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet, and lacquered cast iron fitting with no hub waste and vent connection (specify size of each). Complete with lacquered cast iron faceplate assembly, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

64 Downloads

Low polygon entourage Family of an Off-road vehicle with 9 types of colour.

The naming of the family is based on the "FLIP Master Type List"

http://aiab.org/images/pdf/FLIP_Master_Type_List_V1.6.7.xls

Other documentation of the FLIP (Family Library Interchange Program)

http://aiab.org/index.php/flip-guideline

For further information, please visit Autodesk Industy Advisory Board (Hong Kong)

http://aiab.org/index.php/files

No Rating

Product Version: Revit Architecture 2016

1871 Downloads

MIFAB® Series MC-12-HS single, vertical, adjustable, hub and spigot water closet carrier with lacquered cast iron fitting, 2” (51) vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support.

No Rating

Product Version: Unknown

38 Downloads

MIFAB® Series MC-12 single, vertical, adjustable, water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support.

No Rating

Product Version: Unknown

49 Downloads

Lounge Chair designed by Hendrik Van Keppel and Taylor Green. This model is based on the example in the collection of the Museum of Modern Art, manufactured by Van Keppel-Green in 1946. Furniture by Van Keppel-Green has a notable association with the Arts and Architecture Case Study House program, being featured in photographs by Julius Shulman of Pierre Koenig's Case Study House 22, also known as the Stahl House. VKG furniture was also featured in Shulman’s photographs of Richard Neutra’s Kaufmann House. You can see a rendering of a Revit model of the Stahl House, featuring two VKG pieces at www.future-atelier.com.

See also matching VKG Ottoman

Product Version: Revit Architecture 2008

20391 Downloads

MIFAB® Series MC-12D-HS double, vertical, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

24 Downloads

SIOUX CHIEF MANUFACTURING

Finish Line Halo Drain™ Adjustable Floor Drain with Deck Flange (Square Strainer)

siouxchief.com

Product Version: Revit Architecture 2010

1273 Downloads

MIFAB® Series XL-MI-G ____ sanitary, acid resistant, epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: removable (fixed for XL-MI-G-10/-11) baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), stainless steel calibrated orfice plate, internal air relief by-pass, and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s).

No Rating

Product Version: Unknown

340 Downloads