MIFAB® Series MI-FLEX (specify size) of flexible rubber couplings are manufactured from neoprene compound that meets the requirements of ASTM C-564 and 300 Series of stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws. MI-FLEX Series of flexible couplings are tested and certified to ASTM Standard 1173-2010 and CSA Standard B602-2016 and listed with I.A.P.M.O.

No Rating

Product Version: Unknown

130 Downloads

MIFAB® Series F1100-C-EF lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard 4” (102) round (specify strainer finish) bronze funnel assembly with vandal resistant allen key screws. (For non-membrane floors, use MIFAB F1100-EF Series.)

No Rating

Product Version: Unknown

16 Downloads

MIFAB® Series MI-SD____ sanitary epoxy coated inside and outside fabricated 10 gauge steel sand interceptor. Unit shall include: removable cross bar, four 3" (76) threaded vent connections, solid straining baffles, stainless steel calibrated orfice plate, securing bolt(s), sediment bucket with perforated baffle beside inlet, deep seal trap, sewer gas stopper, internal air relief by-pass, and steel powder epoxy coated non skid rectangular gasketed lid(s).

Product Version: Unknown

215 Downloads

MIFAB Series FS1920-FL, 12” x 12” x 6” deep 16 gauge, All Type 304 (CF8) stainless steel sanitary floor area and indirect waste drain complete with cast stainless steel secured rim and grate with allen key vandal proof stainless steel screws, stainless steel anchor flange with weepholes and anti-splash dome strainer.

No Rating

Product Version: Unknown

34 Downloads

MIFAB Series FS1930-FL, 12” x 12” x 8” deep 16 gauge, All Type 304 (CF8) stainless steel sanitary floor area and indirect waste drain complete with cast stainless steel secured rim and grate with allen key vandal proof stainless steel screws, stainless steel anchor flange with weepholes and anti-splash dome strainer.

No Rating

Product Version: Unknown

37 Downloads

MIFAB® Series MI-OS ___ (specify model) sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil / sediment interceptor with sludge capacity of ____ lbs. (specify). Interceptor complete with ANSI rated “Special Duty” ductile iron grate(s) with load rating over 10,000 lbs., removable sediment bucket and mud pan, deep seal trap with integral sewer gas stopper, internal vent system, cleanout plug and side outlet.

No Rating

Product Version: Unknown

138 Downloads

MIFAB® Series F1100-C-ER( )-1 lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and extended rim (specify diameter), satin finished nickel bronze strainer with vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-ER Series.)

No Rating

Product Version: Unknown

12 Downloads

MIFAB® Series F1100-C-ER( )-1 lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and extended rim (specify diameter), satin finished nickel bronze strainer with vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-ER Series.)

No Rating

Product Version: Unknown

12 Downloads

MIFAB® Series F1100-C-FC( )-1 lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and “FC” (specify diameter) round, reinforced satin finished nickel bronze strainer with surface membrane clamp and vandal resistant, allen key screws. (For non-membrane floors, use MIFAB F1100-FC Series.)

No Rating

Product Version: Unknown

53 Downloads

Stackable chair based upon:

http://www.sauderworship.com/protestant--evangelical/chairs/vantage.html

No Rating

Product Version: Revit Architecture 2015

3641 Downloads

MIFAB® Series MI-SAND/OIL____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel sand and oil interceptor with a holding capacity of - see chart below. Interceptor complete with gasketed non-skid powder epoxy coated lid, removable sediment bucket with perforated baffle beside inlet, deep seal trap with integral sewer gas stopper, two 2” vent connections, adjustable oil draw off assembly and no hub inlet/outlet.

No Rating

Product Version: Unknown

233 Downloads

MIFAB® Series R1150 combined roof drain and secondary overflow system, consisting of a galvanized sump receiver; two lacquered cast iron roof drain bodies with anchor flanges, cast iron waterproofing membrane clamp rings with integral gravel stops, one 4” (102) diameter adjustable ABS overflow standpipe and two self-locking metal dome strainers with a free area of 43 square inches each.

No Rating

Product Version: Unknown

1152 Downloads

Water meter as used by utility network operators, Drainlayers and Plumbers in NZ when connecting potable cold water reticulation to residential and small commerical and industrial  buildings for new build work, refurbishment and as the local regulations change to require water meters in more local government jurisdictions.

Manufactured by Arthur D Riley of NZ, this WTD-DRA70 water meter has the "extra tall manifold" (in ground case)

Revit face based model.

Can easily be hosted on Building Pad with a small area in the topography

CBI (NZ) Liquid 71-21 for cold potable water reticulation systems.

Materials include copper for supply in/out, water meter lid (green plastic) and water meter case (generic ABS plastic).

MEP connections for supply In/OUT  (25 mm).

Revit 2018

No Rating

Product Version: Unknown

1879 Downloads

Based on Wenger 148J005

61"w x 33"d x 50-3/4"h (1549 x 838 x 1289 mm)

https://www.wengercorp.com/storage/violin-rack.php?utm_source=pdf&utm_medium=pdf&utm_campaign=ProductSheet

Created using a Wenger Revit Cello Rack family as starting point. Not intended to be edited. 

No Rating

Product Version: Revit Architecture 2019

483 Downloads

MIFAB® Series F1100-C-T(*)-3 (* specify strainer diameter) lacquered cast iron floor drain with anchor flange, cast iron membrane clamp with primary and secondary weepholes for waterproofing membrane, and heavy duty, solid, gas tight, spanner wrench, vandal proof, stainless steel cover for secured access. (For non-membrane floors, use MIFAB F1100-T Series.)

No Rating

Product Version: Unknown

34 Downloads

MIFAB®  C1100-S Series adjustable floor cleanout with lacquered cast iron body and anchor flange, secondary “O” ring Test Seal, 4” diameter cleanout opening and square scoriated combined cover and plug top assembly (specify material type) with stainless steel vandal proof allen key screws and primary gasket seal. (For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

111 Downloads

MIFAB® Series R1200-PR15” lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, square adjustable collar and standard 15” (381) square ductile iron tractor grate with 3/8” (9) maximum width drainage slots and a free area of 80 square inches.

No Rating

Product Version: Unknown

171 Downloads

MIFAB® Series F1100-C-EG lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard 4” (102) x 9” (235) oval (specify strainer finish) open throat funnel with vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-EG Series.)

No Rating

Product Version: Unknown

15 Downloads

MIFAB® Series F1100-C-EG lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard 4” (102) x 9” (235) oval (specify strainer finish) open throat funnel with vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-EG Series.)

No Rating

Product Version: Unknown

16 Downloads

MIFAB® Series R1250 lacquered cast iron extra deep sump high flow roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

76 Downloads

MIFAB® Series MI-SOLID-SA side access Type 304 14 gauge stainless steel solids interceptor with internal stainless steel perforated sediment bucket connected to a removable and gasketed side access latched lid. Interceptor complete with 2” female threaded inlet, 2” female threaded outlet on each side for right or left hand installation and internal stainless steel flow control.

No Rating

Product Version: Unknown

23 Downloads

MIFAB® Series R1200-G lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

71 Downloads

MIFAB®  C1100 Series (specify top assembly design) adjustable floor cleanout with lacquered cast iron body and anchor flange, secondary “O” ring Test Seal, 4” diameter cleanout opening and scoriated combined cover and plug top assembly (specify material type) with stainless steel vandal proof allen key screws and primary gasket seal. (For membrane floors, add Suffix -C for membrane clamp.)

No Rating

Product Version: Unknown

62 Downloads

This version of the School Bus is based on the model uploaded by DonaldLK on 29th June 2015. https://www.revitcity.com/downloads.php?action=view&object_id=16486

Also, the engine of the bus (ford racing engine) was created by docvingoldman2708.

https://www.revitcity.com/downloads.php?action=view&object_id=8364

The design of the bus is retro 80s, or that's what I intended to do.

The file is .rvt and it cannot be opened with versions earlier than Revit 2017.

The length of the bus is 33', so it can fit on European roads as well.

Product Version: Revit Architecture 2017

2837 Downloads

MIFAB® C1100-T Series adjustable floor cleanout with lacquered cast iron body and anchor flange, secondary “O” ring Test Seal, 4” diameter cleanout opening and round scoriated combined cover and plug top assembly (specify material type) with 1/8” recess for tile and stainless steel vandal proof allen key screws and primary gasket seal. (For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

44 Downloads

MIFAB® Series F1100-C-FT6-1 lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard reinforced 6” (152) diameter satin finished nickel bronze strainer with 1/8” (3) recessed tile flange, and vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-FT Series.)

No Rating

Product Version: Unknown

63 Downloads

MIFAB® Series F1100-C-SD lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard reinforced, (”SD6”) square 6” x 6” (152 x 152) (specify material finish) strainer with solid hinged cover and secondary grate. (For non-membrane floors, use MIFAB F1100-SD Series.)

No Rating

Product Version: Unknown

135 Downloads

MIFAB®  C1100-TS Series adjustable floor cleanout with lacquered cast iron body and anchor flange, secondary “O” ring Test Seal, 4” diameter cleanout opening and square scoriated combined cover and plug top assembly (specify material type) with 1/8” recess for tile and stainless steel vandal proof allen key screws and primary gasket seal. (For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

37 Downloads

MIFAB®  C1100-TS Series adjustable floor cleanout with lacquered cast iron body and anchor flange, secondary “O” ring Test Seal, 4” diameter cleanout opening and square scoriated combined cover and plug top assembly (specify material type) with 1/8” recess for tile and stainless steel vandal proof allen key screws and primary gasket seal. (For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

29 Downloads

Hi Guys

I was looking for something extreme and loosely based this on the Emperor 200 gaming station.

As spatial planning is part of my job I needed to get an idea of how big this unit would be.

This is a very rough model but works for what I need.

Product Version: Revit Architecture 2014

7781 Downloads