 |
MIFAB Series FS1750-FL, 8” Round x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior, loose set grate and anchor flange with weepholes. Anti-splash aluminum dome strainer included. |
No Rating |
Product Version: Unknown
71 Downloads
|
|
 |
Just modelled, a nice modern stool based on the TOKENnyc Catenary Bar Stool.
See link to stool.
http://www.houzz.com/photos/127740/TOKENnyc-Catenary-Bar-Stool-modern-bar-stools-and-counter-stools-other-metro
The stool is fixed in size but materials are changable
Hope it comes in useful
Enjoy |
No Rating |
Product Version: Revit MEP 2014
48798 Downloads
|
|
 |
MIFAB® Series FS1720-FL, 12” x 12” x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate and anchor flange with weepholes. Anti-splash aluminum dome strainer included. |
No Rating |
Product Version: Unknown
107 Downloads
|
|
 |
MIFAB® Series F1320-C-TFB lacquered cast iron floor drain with anchor flange, standard 1” (25) thick, 9” (235) round, (specify material finish) tractor grate, and “True-Fit” sediment bucket designed so that grate cannot be set unless the sediment bucket is in position. |
No Rating |
Product Version: Unknown
19 Downloads
|
|
 |
[EN] This is a Furniture Family based on a plan. Fully parametric.
[PT-BR] Esta é uma familia de mobiliário com base no plano. Completamente paramétrica. |

|
Product Version: Revit Architecture 2012
7753 Downloads
|
|
 |
MIFAB® Series MC-25 residential water closet carrier system with lacquered cast iron no hub fitting (specify size and style), lacquered cast iron faceplate, mounting hardware, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket and polished chrome plated finishing cap nuts. |
No Rating |
Product Version: Unknown
51 Downloads
|
|
 |
MIFAB® Series MI-TEE (specify size) of flexible rubber elbow couplings are manufactured from a flexible PVC that meets the requirements of ASTM C-564 and Type 300 Series of stainless steel clamps tightened (to 60 lbs. torque) with 5/16” Type 300 stainless steel hex head screws. The MI-TEE Series of flexible tees are listed with I.A.P.M.O. Non constant temperature rating is 140 F. |
No Rating |
Product Version: Unknown
353 Downloads
|
|
 |
MIFAB® Series F1840 lacquered cast iron planting area drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, stainless steel ballast guard, and standard 1” (25) thick, 9” (229) round, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
16 Downloads
|
|
 |
For more contemporary/modern designs Kolbe has introduced the Ultra Series beveled direct set. These aluminum clad wood windows are glazed to the interior and direct set in the heavy duty extruded aluminum frame. The profile is integral to the frame exterior, providing a streamlined appearance in addition to the strength of extruded aluminum. Daylight is maximized due to the glass unit being set directly into the frame without a sash; this also gives a larger view. The detailed sticking allows for Kolbe's performance divided lite (PDL) options, grilles-in-the-airspace, or interior wood removable grilles to be used. As with Kolbe’s other Ultra Series products the same flexible design options are available. www.kolbe-kolbe.com |

|
Product Version: Revit Architecture 2011
1317 Downloads
|
|
 |
MIFAB® Series R1260 lacquered cast iron extra deep sump high flow roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, and standard self-locking polyethylene dome strainer with a free area of 125 square inches. |
No Rating |
Product Version: Unknown
59 Downloads
|
|
 |
This is a ceiling opening vent with simple rectangular bars across, based on the one on the ceiling I was modeling. It is very parametric. You can change the width and length of the vent, the width and distance bewteen bars, trim width and bracing depth.
|

|
Product Version: Revit Architecture 2013
4129 Downloads
|
|
 |
MIFAB® Series F1440 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with standard 1” (25) thick, 12” (305) hinged square, (specify material finish) tractor grate. |
No Rating |
Product Version: Unknown
9 Downloads
|
|
 |
Series LFN250 Iron Body Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 250psi (17.2 bar) and may be adjusted from 25 - 75psi(172 - 517 kPa). The standard setting is 50psi (345 kPa). All parts are quickly and easily serviceable without removing the valve from the line. The optional bypass feature permits the flow of water back through the valve into the main when pressures, due to thermal expansion on the outlet side of the valve, exceed the pressure in the main supply. The LFN250 features Lead Free* construction to comply with Lead Free* installation requirements. |
No Rating |
Product Version: Revit MEP 2014
409 Downloads
|
|
 |
MIFAB Series C1460-S (select model number) lacquered cast iron cleanout with large access area, tapered thread plug and square (specify cover size, either 7” x 7” or 9” x 9”), smooth nickel bronze access panel with allen key screwsand anchor frame with mounting lugs. |
No Rating |
Product Version: Unknown
21 Downloads
|
|
 |
The JUAL Angular bowl outlet consists of a bowl which cumulates the water before it is led to the pipe system of the building. The outlet is delivered with standard pipe diametres 50, 63 and 75 mm.The bowl outlet is made from stainless steel and is delivered with Integrated bitumen or foil membrane.
|
No Rating |
Product Version: Revit Architecture 2019
132 Downloads
|
|
 |
MIFAB® Series R1200-HC lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, adjustable extension with auxiliary drainage slots, secondary clamp, and standard self-locking polyethylene dome strainer with a free area of 125 square inches. |
No Rating |
Product Version: Unknown
46 Downloads
|
|
 |
[EN] This is a Furniture Family based on a floor. Fully parametric.
[PT-BR] Esta é uma familia de mobiliário com base no piso. Completamente paramétrica. |

|
Product Version: Revit Architecture 2012
13093 Downloads
|
|
 |
[EN] This is a Lighting Fixture Family based on a pan. Fully parametric.
[PT-BR] Esta é uma familia de luminária com base no plano. Completamente paramétrica. |

|
Product Version: Revit Architecture 2012
36707 Downloads
|
|
 |
Here is a Fridge Freezer I have modelled based on the Hotpoint fridge freezer (link below)
The fridge itself is fixed in size but if you wish to added dimension parameters to it then please do so.
The materials are all changable parameters.
http://www.currys.co.uk/gbuk/household-appliances/refrigeration/fridge-freezers/hotpoint-ffu4dx-fridge-freezer-stainless-steel-17152055-pdt.html
Size is 1950H x 700W x 760D mm
Enjoy and feedback is always welcome.... |

|
Product Version: Revit MEP 2014
59214 Downloads
|
|
 |
MIFAB® Series F1510 lacquered cast iron floor drain with deep sump body, wide anchor flange, weepholes, and adjustable collar with square heavy duty ductile iron hinged tractor grate with four piece surface membrane clamp, sediment bucket and free area of 51 in² (32,903²). |
No Rating |
Product Version: Unknown
212 Downloads
|
|
 |
Roof steps are a simple way to creat an access route, for example, up to a chimney. They may be used on roofs of up to a 4-meter access height with a pitch of a 45 degrees.
They are installed in a straight line one over the other are finished off with anchoring device for personal fall protection, for example , a rdige rail.
Made in Sweden by CW Lundberg AB |
No Rating |
Product Version: Revit Architecture 2018
259 Downloads
|
|
 |
MIFAB® Series MI-ELB (specify size) of flexible rubber elbow couplings are manufactured from a flexible PVC that meets the requirements of ASTM C-564 and Type 300 Series of stainless steel clamps tightened (to 60 lbs. torque) with 5/16” Type 300 stainless steel hex head screws. The MI-ELB Series of flexible couplings are listed with I.A.P.M.O. Non constant temperature rating is 140 F. |
No Rating |
Product Version: Unknown
255 Downloads
|
|
 |
MIFAB® Series MC-40 floor mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and mounting hardware. |
No Rating |
Product Version: Unknown
28 Downloads
|
|
 |
MIFAB® Series MC-40 floor mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and mounting hardware. |
No Rating |
Product Version: Unknown
15 Downloads
|
|
 |
This casework family is over the top! There are the usual casework dimensions, but in addition, there are instance parameters to open the doors, pull out the top drawer, and slide out the two shelves hidden behind the doors, all individually controlled. There are dedicated materials assigned by casework subcategories. The model is replete with pots and pans sitting on the sliding shelves. There are ten predefined widths. At the narrower sizes, you'll see the pots and pans sticking out through the cabinet sides, so if you want, for instance, a 21" unit, you'll have to edit the family to remove or reposition them. The unit is modelled on the American Woodmark line of cabinets. The properties URL will take you to the American Woodmark web site. This is a complex model. I have tested it thoroughly, but if there are any difficulties, please leave a note for me.
I have updated this model. It has more subtle engraving on the doors, curved handles, and the doors open more reliably. Open them in angular increments of something less than 90°. For example, if you want them opened to 90°, do it in two operations with the first angle 70° and the next 20°. Close them the same way. |

|
Product Version: Revit Architecture 2013
7503 Downloads
|
|
 |
MIFAB Series FS1940-FL, 12” x 12” x 10” deep 16 gauge, All Type 304 (CF8) stainless steel sanitary floor area and indirect waste drain complete with cast stainless steel secured rim and grate with allen key vandal proof stainless steel screws, stainless steel anchor flange with weepholes and anti-splash dome strainer. |
No Rating |
Product Version: Unknown
38 Downloads
|
|
 |
MIFAB® Series R1100-JC lacquered cast iron roof drain with anchor flange, cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 43 square inches. |
No Rating |
Product Version: Unknown
109 Downloads
|
|
 |
Based on the table tennis tables used at the 2008 Olympics.
Please Rate
AKA: Ping Pong |

|
Product Version: Revit Architecture 2011
11020 Downloads
|
|
 |
MIFAB® Series F1100-C-ER( )-1 lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and extended rim (specify diameter), satin finished nickel bronze strainer with vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-ER Series.) |
No Rating |
Product Version: Unknown
11 Downloads
|
|
 |
Logo Mexican Social Security Institute. (IMSS) logo based on wall. this file is not parametric
logotipo del instituto mexicano del seguro social. (IMSS) logotipo basado en muro. este archivo no es parametrico |
No Rating |
Product Version: Revit Architecture 2010
1507 Downloads
|
|