MIFAB Series MI-SOLID-S lacquered cast iron solids interceptor with internal stainless steel perforated sediment bucket removable through top. Interceptor complete with 2” F.I.P. inlet and outlet and gasketed lid secured with single handle.

No Rating

Product Version: Unknown

43 Downloads

Series LF123LP Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 200psi (13.8 bar) and may be adjusted from 10 - 30psi (69 - 207 kPa). The standard setting is 30psi (207 kPa). All parts are quickly and easily serviceable without removing the valve from the line. The LF123LP features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

291 Downloads

Kohler model # K-T944-4 "Stillness" wall mounted faucet, ADA complaint.  Created from Kohler 2D drawings, but it is a rather simple design so should be fairly accurate.  This is Wall based.  Inlcludes URL link and cost information.  Material is not defined, but listed as "Kohler Faucet" in the family.  Both the Polished Chrome and Satin Nickel family types are included (list price, description, type, and model number changes)

No Rating

Product Version: Revit Architecture 2008

13084 Downloads

Series LFB6800 & LFB6801 3-Piece, Full Port, Lead Free* copper silicon alloy Ball Valves feature an in-line maintenance design that offers serviceability of all operating parts without disturbing the rigid pipeline system. Their full port orifice ensures maximum flow capacity. Durafill seats, and stainless steel ball and stem provide maximum safety and highest operating pressure and temperature limits. Lead Free* construction complies with Lead Free* installation requirements.

Product Version: Revit MEP 2014

238 Downloads

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

Wall Art. Cherubs

This model is FACE-BASED. It is a model of a plaster Wall Plaque of cherubs.  Materials are parametric

Thomas@loker.com

Product Version: Revit Structure 2020

5409 Downloads

Can Washer based on Aervoid Jet Can Washers. Fine, Medium and Course representations and piping connectors for HW, CW and SS. Revit MEP 2012 and 2013 versions with editable materials.

No Rating

Product Version: Revit MEP 2012

760 Downloads

Parametric Detail Componenet. An improvement on the OOTB Bolt - Side Family. My biggest beef with this family has always been no washers! Instance parameter adds a washer to the head end or the nut end or both. Instance parameter adds a symbolic bolt hole thru the bolted assembly. Bolt shaft is also a instance parameter. I typically only use A307 3/8"Ø, A325 1/2"Ø, A325 3/4"Ø or A325 1"Ø bolts so these are the only types. Parameters exist though to add more. Type parameters are based on values from Portland Bolt. Revit 2016.

Product Version: Revit Structure 2016

2545 Downloads

MIFAB® Series F1230 lacquered cast iron floor drain with standard (specify material finish), 5” (127) diameter strainer (specify material finish).

No Rating

Product Version: Unknown

397 Downloads

This is a modified version of a manufactures coiling grille for recessed mounting for use in retail.  Side track is set to be flush mounted with drywall face instead of surface mounted.  Tube steel backup shown for reference but actual size should be coordinated with your engineer based on opeing size.  The TS 2x2  worked for my small application as a starting poing until the size was finalized by my engineers for a 6' x 10' opening.

 http://www.clopaydoor.com/bimfiles.aspx for large selection from manufactrer

Product Version: Revit Architecture 2011

4942 Downloads

Office phone booth, measuring 41.5"W x 43.3"W x 88.8"H for use for acoustic quality and privacy in office settings.

Dimensions are not parameter controlled and are based on the ROOM brand phone booth. 

Parameters control materials (the light and dark color options are included as family types), visibility of door swing in plan, and visibility of a stool I included for reference.

This model is one I created for personal use, and is not created by the ROOM company.

More info here: 

https://room.com/pages/office-privacy-booths

Keywords: office phone booth privacy call conference acoustic telephone

No Rating

Product Version: Unknown

3664 Downloads

A fully parametric beam-based family

Minimum length 1m

It can be used for both vertical curbs and horizontal curbs

It can also be modeled in a curve

Аn invaluable surname for road design

Product Version: Unknown

288 Downloads

A fully parametric beam-based family

Minimum length 1m

It can be used for both vertical curbs and horizontal curbs

It can also be modeled in a curve

Аn invaluable surname for road design

Product Version: Unknown

171 Downloads

MIFAB Series FS1750, 8” Round x 6” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

84 Downloads

Gutter joint created in Revit Architecture 2016. It comes with a type catalogue specifying the available colors.

The family contains information about material quality and links to web tools.

The family type is Face Based Generic Model.

For more rainwater system families from Lindab, visit www.lindab.com/bim

For a complete free of charge LindabRevitLibrary, visit www.lindab.com/lindabrevitlibrary

No Rating

Product Version: Revit Architecture 2016

778 Downloads

This is a parametric generic model family based on Victor Pallet Racking, select half, quarter or third shelving in type graphic parameters. Shelving boards optional.  Materials are to be set as type parameters.  Model elements not visable in plan view or coarse view settings, indicated in plan by dashed grey lines.

 keywords: racking, pallet, shelving, victor, storage, industrial, commercial, bulk storage, adjustable.

Product Version: Revit Architecture 2010

17449 Downloads

MIFAB Series FS1760, 12” Round x 8” deep cast iron floor area and indirect sanitary waste drain complete with white acid resistant porcelain enamel coated interior and loose set grate. Anti-splash aluminum dome strainer included.

No Rating

Product Version: Unknown

64 Downloads

Simple parametric microwave, classic look, floor based (adjust offset from floor), metric units (cm), specialty equipment category.  UPDATED (9/15/2012).

No Rating

Product Version: Unknown

4132 Downloads

This family is based off of the Plastico Pyramid Skylights that are for larger opening spans.  It's a modular system with adjustable skylight size with a set minimum 17.25" width and 99" max length for individual units.  The number of units length and width is adjustable to as large as needed to no smaller than 3x3. The mullion, curb depth, curb height, frame height, and pyramid heights are all adjustable.  This family requires at least 3 unit by 3 unit setup, otherwise it won't look right.  I have created another family for 2x2 units (4 skylights total) that is parametric also.

No Rating

Product Version: Unknown

2866 Downloads

MIFAB® Series F1880 4” x 8” open sight drip drain with Type 304 stainless steel body in plain finish and aluminum bottom dome strainer.

No Rating

Product Version: Unknown

35 Downloads

MIFAB® Series MC-56-LP exposed arms for wall mounted lavatory with white, lacquered, adjustable, cast iron exposed support arms. Complete with fixture leveling and mounting hardware.

No Rating

Product Version: Unknown

35 Downloads

This family is based off of the Plastico Pyramid Skylights that are for larger opening spans.  It's a modular system with adjustable skylight size with a set minimum 17.25" width and 99" max length for individual units.  The number of units length and width is adjustable to as large as needed to no smaller than 3x3. The mullion, curb depth, curb height, frame height, and pyramid heights are all adjustable.  This family requires at least 3 unit by 3 unit setup, otherwise it won't look right.  I have created another family for 2x2 units (4 skylights total) that is parametric also. 

Product Version: Revit Architecture 2013

5249 Downloads

Fascia gutter bracket created in Revit Architecture 2016. It comes with a type catalogue specifying the available colors.

The family contains information about material quality and links to web tools.

The family type is Face Based Generic Model.

For more rainwater system families from Lindab, visit www.lindab.com/bim

For a complete free of charge LindabRevitLibrary, visit www.lindab.com/lindabrevitlibrary

No Rating

Product Version: Revit Architecture 2016

705 Downloads

MIFAB® R1420 lacquered cast iron balcony drain with adjustable nickel bronze dome strainer, membrane clamp ring, cast iron body and threaded side outlet.

No Rating

Product Version: Unknown

72 Downloads

MIFAB® R1420 lacquered cast iron balcony drain with adjustable nickel bronze dome strainer, membrane clamp ring, cast iron body and threaded side outlet.

No Rating

Product Version: Unknown

36 Downloads

Gutter stop end created in Revit Architecture 2016. It comes with a type catalogue specifying the available colors.

The family contains information about material quality and links to web tools.

The family type is Face Based Generic Model.

For more rainwater system families from Lindab, visit www.lindab.com/bim

For a complete free of charge LindabRevitLibrary, visit www.lindab.com/lindabrevitlibrary

No Rating

Product Version: Revit Architecture 2016

549 Downloads

MIFAB Series F1210TC lacquered cast iron floor drain with anchor flange, cast iron clamp ring with weepholes for waterproofing membrane, and polished chrome plated strainer.

No Rating

Product Version: Unknown

72 Downloads

Rafter gutter bracket created in Revit Architecture 2016. It comes with a type catalogue specifying the available colors.

The family contains information about material quality and links to web tools.

The family type is Face Based Generic Model.

For more rainwater system families from Lindab, visit www.lindab.com/bim

For a complete free of charge LindabRevitLibrary, visit www.lindab.com/lindabrevitlibrary

No Rating

Product Version: Revit Architecture 2016

339 Downloads

Adjustable gutter bracket created in Revit Architecture 2016. It comes with a type catalogue specifying the available colors.

The family contains information about material quality and links to web tools.

The family type is Face Based Generic Model.

For more rainwater system families from Lindab, visit www.lindab.com/bim

For a complete free of charge LindabRevitLibrary, visit www.lindab.com/lindabrevitlibrary

No Rating

Product Version: Revit Architecture 2016

493 Downloads

This wall sconce is based on the Katie Small Acorn Sconce, designed by Thomas O'Brien for Visual Comfort (Circa Lighting). It has an acorn-shaped glass shade hanging gently from a metal backplate.

Materials are parametric. You can change the metal finish (instance) and shade finish (type).

Height: 13.4" Width: 6.5" Extension: 8.75" Backplate: 5.25" Round 

I'm a student and created this sconce for a project. This is my first upload. 

Product Version: Revit Architecture 2017

8650 Downloads

MIFAB® / Hydromax Series MH-PG-D fabricated steel siphonic parking garage/Deck Drain Sump Reciever with ductile iron grate

No Rating

Product Version: Unknown

249 Downloads