Chair based on the Lancaster Rustic Industrial Side Chair with Antique Walnut Finish

No Rating

Product Version: Revit Architecture 2017

2710 Downloads

Structural bent beam but not parametric.  Roof based family.  Pretty easy to revise dimensions.

No Rating

Product Version: Revit Architecture 2011

1316 Downloads

Based on the Contura street light manufactured by Gardco.

Product Version: Revit Structure 2008

34849 Downloads

Gray Water Sump Pump based on Saniflo Sanivite model

No Rating

Product Version: Revit Architecture 2015

2116 Downloads

Based on Florestone Mop Sink

Product Version: Revit Architecture 2015

6573 Downloads

This is a simple outdoor ceiling based 1' black light box.

No Rating

Product Version: Revit Architecture 2013

4238 Downloads

Sign Lactation Nursing Room

Face Based

No Rating

Product Version: Revit Structure 2020

183 Downloads

This is a door tag based off of NCS 3.1 where the Door number is Parallel to the door leaf.

Product Version: Revit Architecture 2008

10989 Downloads

This is a parametric hanging box light. It is not ceiling based but you can change the elevation of the light and the length of the cables so that they'll go up to the cieling. You can also change the width, length and materials. 

REVIT 2016

Product Version: Revit Architecture 2016

17413 Downloads

Nicely modelled copper style bar stool.

Looks good in a render. Materials are parameter based so you can change to how you like. This should render straight as you see it here if that how you like it.

Enjoy

Cheers

Product Version: Revit MEP 2014

36602 Downloads

This is a more or less parametric PEMB frame. Most dimensions are changeable. I was having inconsistent unit errors so to change the slope you have to change the decimal in the slope equation and the width at the top is governed by the factor in it's equation that is based on the base width. Play with it and have fun.

Product Version: Revit Building 9.1

3581 Downloads

Hundreds of more free downloads at >>

http://revitcomponents.blogspot.com/ 

♥ ♥ ♥

Product Version: Revit Architecture 2009

32004 Downloads

pitch adaptable Half (3) 6 Panel truss for monopitch roofs

Adjust top chord to required needs and apply coping for the finishing touches.

ensure open end is located on defined pitch boundary line.

Whilst it may not be absolutely perfect for basic drawing purposes saves time by not having to create an one off truss for a project. 

No Rating

Product Version: Revit Architecture 2015

4926 Downloads

Height: 2'-4"

Width: 4'-0 1/2"

Depth: 1'-3"

This is based off of the storage cabinet that I made for all of my soccer equipment. The shoes are stacked ontop of each other, that's why the shoe storage's are skinny. 

You can change the Labels or take the Adidas and Nike signs away. I only put those on to not offend anyone. Personally I am purely Adidas when it comes to soccer, but I don't discriminate on the other brands!! ahaha

No Rating

Product Version: Revit Architecture 2015

10517 Downloads

with neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty brass casing, 360 degree swivel inlet connection, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

39 Downloads

A simple 45 degree wall cabinet with open shelves.

Parametric family width x height x depth + material.  Shelves adjust in height based on cabinet height.

Please rate and offer suggestions!

Product Version: Revit Architecture 2017

9006 Downloads

This is a tranaction window with a transaction drawer based upon the Diebold model 131-85 Retail Window with 121-30 transaction drawer (5'-0"x5'-0" window opening). There is also a microphone modeled on the interior transaction surface. This is similiar to what you would see in a pharmacy drive through. I did not make this parametric because I did this for a specific instance.

Product Version: Unknown

23288 Downloads

Revit 2019.  This railroad segment is based on the Railing families from the Enjoy Revit blog.

Note this is not my content but I modified the families to be closer to US standards and changed the units to Feet/inches.

It has an interior rail width of 4'-8.5"

Product Version: Revit Architecture 2018

2174 Downloads

A triangular curtain wall panel with silicon joint geometry (no silicon but flush faced glazing).  Use with pattern based curtain wall systems.

Product Version: Revit Architecture 2012

7373 Downloads

1011 approved anti-siphon integral vacuum breaker with 3/4” male hose connection. Hydrant assembly complete with hot and cold temperature control selection, one piece neoprene plunger to control the flow, hardened bronze operating stem, heavy duty brass casing, heavy duty chrome plated bronze head casting, chrome plated face plate and polished nickel bronze box with hinged locking cover. Loose tee key to be furnished with each hydrant.

No Rating

Product Version: Unknown

62 Downloads

Face based water tap.

Brazilian manufactor Deca, model Link.

www.deca.com.br 

No Rating

Product Version: Revit Architecture 2009

4825 Downloads

MIFAB® Series MI-HUB-ARC (specify size) shielded repair couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force.

The MI-HUB-ARC Series of shielded repair couplings are tested and certified to ASTM Standard C1173 and CSA Standard B602 and listed with IAPMO. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

No Rating

Product Version: Unknown

25 Downloads

MIFAB® Series F1140C lacquered cast iron floor drain with anchor flange, cast iron clamp ring with primary and secondary weepholes for waterproofing membrane, seepage collection sump, integral deep seal trap, and standard 1” (25) thick, 7” (178) round (specify

F1140C-7) or 9” (235) round (specify F1140C-9), (specify material finish) tractor grate and standard reinforced 5” (127) diameter (specify material finish) floor cleanout with access cover, “O” ring Test Seal and plug with primary gasket seal.

No Rating

Product Version: Unknown

26 Downloads

A Revit 2013 generic model family of a 29.9 Cubic Foot Intermediate Bulk Container (IBC). The model is based on the Carolina Conveying Solibin IBC system, usually used in conjunction with the Solibin Discharge Station.

Product Version: Revit Architecture 2013

2273 Downloads

This is a headwall based on the Integris 2002B from Hill-Rom.  It has a few extra parameters and device annotations that not everyone may need.  These were added for our project's specific requirements but can easily be removed.

No Rating

Product Version: Revit Architecture 2009

5581 Downloads

A Family Face based object to furnish building externally.

It's a proposal for a project, recently in Melaka...This is a Religous(Muslim/Muslimat) place for them to pray inside. The ablution was placed externally.

The rfa's file is, the 'Moon&Crest'  revit family. It's placed on top of the roof)

Product Version: Unknown

8088 Downloads

Updated, more realistic, version of a slab roller for ceramic rooms. Based loosely on Bailey 69" model: M-400-035G-RH-6-K.Too much work to provide dimension parameters. Materials have been included, though.

Created in Revit Architecture 2024 (no option to select anything beyond 2020).

No Rating

Product Version: Revit Architecture 2020

138 Downloads

A hook strip based on the Bobrick B-232 model.  Has both 36" and 24" models included with variable mounting height

Product Version: Revit Architecture 2008

9552 Downloads

MIFAB® Series MI-HUB-TRT (specify size) shielded transition couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force.

The MI-HUB-TRT Series of shielded transition couplings are tested and certified to ASTM Standard C1460 and CSA Standard B602 and listed with IAPMO. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

No Rating

Product Version: Unknown

18 Downloads

MIFAB® Series MI-HUB-TRC (specify size) shielded transition couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force.

The MI-HUB-TRC Series of shielded transition couplings are tested and certified to ASTM Standard C1460 and CSA Standard B602 and listed with IAPMO. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

No Rating

Product Version: Unknown

17 Downloads