MIFAB® Series MC-10D-27-37-HS double, horizontal, adjustable hub and spigot water closet carrier with lacquered, 37” (940) long barrel cast iron fitting, 2” (51) no hub vent connection, 2” (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

17 Downloads

MIFAB® Series MC-10-EXT (Specify L for left or R for right design) single, horizontal, adjustable, high rough-in water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support

No Rating

Product Version: Unknown

26 Downloads

MIFAB® Series MHY-58 self draining, non-freeze,roof hydrant with 3/4” male hose connection with heavy duty cast iron head casting and lift handle with lock feature and combination 3/4” (19) female and 1” (25) male inlet connection. Hydrant assembly complete with one piece neoprene plunger, hardened bronze operating stem, 1” (25) galvanized steel casing, heavy duty bronze head casting with head nut assembly, 3/8” (9) diameter galvanized steel operating rod and a tapped 1/8” (3) drain port in the bronze tailpiece.

No Rating

Product Version: Unknown

146 Downloads

MIFAB® Series MC-13D-HS double, vertical, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, left, right or both (specify) 4” (102) side inlets, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

20 Downloads

MIFAB® Series MC-10-27-37 (Specify L for left or R for right design) single, horizontal, adjustable, water closet carrier with lacquered, 37” (940) long barrel cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, 2” (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support.

No Rating

Product Version: Unknown

20 Downloads

MIFAB® Series MC-15 single, vertical, fixed, water closet carrier with offset lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent  connection, lacquered cast iron faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support.

No Rating

Product Version: Unknown

16 Downloads

Complete with back to back lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and mounting hardware.

No Rating

Product Version: Unknown

16 Downloads

MIFAB® Series MC-10D-HS double, horizontal, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts. 

No Rating

Product Version: Unknown

17 Downloads

MIFAB® Series MHY-68 ____ (specify length) non freeze yard hydrant with heavy duty cast iron head casting and lift handle with lock feature and combination 3/4” (19) female and 1” (25) male inlet connection. Hydrant assembly complete with neoprene plunger, hardened bronze operating stem, 1” (25) galvanized steel casing, heavy duty bronze head casting with head nut

assembly, 3/8” (9) diameter galvanized steel operating rod and a tapped 1/8” (3) drain port in the bronze tailpiece.

No Rating

Product Version: Unknown

55 Downloads

anchor tie down support.

No Rating

Product Version: Unknown

55 Downloads

No Rating

Product Version: Unknown

33 Downloads

No Rating

Product Version: Unknown

28 Downloads

No Rating

Product Version: Unknown

46 Downloads

No Rating

Product Version: Unknown

23 Downloads

No Rating

Product Version: Unknown

18 Downloads

No Rating

Product Version: Unknown

16 Downloads

No Rating

Product Version: Unknown

25 Downloads

An unnecessarily parametric curtain family. This was more of an exercise as opposed to something practical. 

The curtains can be parametrically opened and closed through a slider in plan view. In order to do this it took calculous, trigonometry, and numerical methods to pull off. It is a little computationally heavy on the model. 

Parameters include:

Materials, Curtain length/width/thickness, rod length/diameter, wall offset, grommet diameter/spacing, left/right/double curtains.

Product Version: Unknown

20428 Downloads

An unnecessarily parametric curtain family. This was more of an exercise as opposed to something practical. 

The curtains can be parametrically opened and closed through a slider in plan view. In order to do this it took calculous, trigonometry, and numerical methods to pull off. It is a little computationally heavy on the model. 

Parameters include:

Materials, Curtain length/width/thickness, rod length/diameter, wall offset, grommet diameter/spacing, left/right/double curtains.

Product Version: Unknown

8837 Downloads

Download: http://bimobject.com/en/elfa/product/inred_40_642 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app 

Basic elfa unit for clothing storage. 

Suitable for housing projects both behind sliding doors as well as in Walk In closets. Solution based on our unique elfa Hanging System for high flexibility, easy and fast installation. 

Long hang standards to ensure full future flexibility with both specific add on solutions or completely individual add on component by component made by the final end user.

Place add on solution (bedroom and/or linen solutions) at the far left or far rigth side if used together with sliding doors.

Use Clearance function to ensure correct depth for best practical function. 

If multiple sections are used, the second section from the left is adjusted in width in order to match total width. Please note that pull-out functions can not be adjusted in width. The actual adjustment of products is to be made by installer (cutting closet rod and wire shelf).

Product Version: Unknown

14038 Downloads