 |
Recreation of the 200559 - 8in Diamond Mini Pendant from Meyda lighting. Overall length (ceiling to bottom of pendant body) is parametric to adjust hanging height. Set materials for the mica shade and metal frame.
Made this for my wife who is an interior design student. Hopefully it helps some other people out there. |
|
Product Version: Revit Architecture 2017
1297 Downloads
|
|
 |
Discera Solar offers a sleek architectural form in a solar powered configuration featuring a 39 watt metal halide light source with well defined IDA certified "Dark Sky Friendly" Full Cutoff optics. Engineered to achieve many years of low maintenence, self-contained performance. Sealed gel batteries and "smart controller" held aloft in a PVC easy access compartment. |
|
Product Version: Revit Architecture 2010
17461 Downloads
|
|
|
 |
Gun metal vent hood with built in lighting. Both hood and ductwork height is adjustable. Materials adjustable as well, just make sure you assign the vent lights to the "Light Filter" material before rendering.
All parameters should be instance parameters.
WARNING: Not a ceiling based model, so you will need to adjust duct height versus hood height. |
|
Product Version: Revit Architecture 2015
27075 Downloads
|
|
|
 |
My best recreation of the Sargent Chandel-Air from Meyda. 54" round, diffuser body, metal trim, fan blades, fan body materials can be set. Only shaft length (to adjust hanging height) is parametric.
Made this for my wife who is an interior design student. Hopefully is helps some others out there. |
No Rating |
Product Version: Revit Architecture 2017
463 Downloads
|
|
|
 |
This is a model of a backyard barbeque, highly parametric, you can open and close the hood, and change many of the finishes. I will also upload the steak model I made to show the grill in action. I will be also loading the rangetop and articulated light for the barbeque as well.
The barbeque has a void attachech so you can drop it on an existing counter and it will cut out the space around it. Its one of my first attempts at building a parametric family. |
|
Product Version: Revit Structure 2020
19419 Downloads
|
|
|
 |
Parametric Pendant Lighting (Exposed Bulb). Not ceiling mounted so heights can be fully adjustable.
WARNING: I accidentally made type parameters instead of instance parameters so it could be a problem if you want to individually adjust settings of multiple instances. However, if you don't mind all fixtures changing at the same time, you are good to go.
Parameters: Bulb height (keep at 0'-0" at all times) / Cord Length / Support (Rail) height, Rod Length, Materials
Light sources are nested as separate bulbs |
|
Product Version: Revit Architecture 2015
8312 Downloads
|
|
|
 |
RFA for AED (Auto External Defibrillator) face-hosted all composed from native Revit primitives. Intended to be applied to wall face- There is no internal modeling, just objects viewed on the wall face.
Imperial units, Generic Models Category
Heart equipment life safety emergency medical exercise old sparky
Many thanks to the generous RevitCity staff and uploaders!
|
No Rating |
Product Version: Revit Architecture 2020
529 Downloads
|
|
|
 |
this is a cake display unit filled with a large variety of cakes including doughnuts, cookies, jam filled sticks with flavoured toping, gingerbread men, custard tarts, chocolate eclaires/porfito rolls, sponge cakes and slices, and other large cakes including a tiramissu. all cakes on 5 degree angle and unit includes working light |
|
Product Version: Unknown
35752 Downloads
|
|
|
 |
this is a cake display unit filled with a large variety of cakes including doughnuts, cookies, jam filled sticks with flavoured toping, gingerbread men, custard tarts, chocolate eclaires/porfito rolls, sponge cakes and slices, and other large cakes including a tiramissu. all cakes on 5 degree angle and unit includes working light |
|
Product Version: Unknown
11934 Downloads
|
|
|
 |
atkinson desk (not specifically measured to the real model) light and chair are from bimobject.com enjoy! |
No Rating |
Product Version: Revit Structure 2017
729 Downloads
|
|
|
 |
A quick sketch of a tensile fabric shade made from Revit system roof. Edit the roof footprint but keep the small pitched corners in place whatever shape you draw.
You may manually edit the column or rafters for any custom layout.
Edit the "Fabric" material for desired color or transparency -although the transparency adjustment often produces unexpected appearances.
Paste or link it into Revit file; there is no hosting in the components |
No Rating |
Product Version: Revit Architecture 2020
1359 Downloads
|
|
|
 |
FP Focus Point SpeakersPerfect for applications where you want sound in a precise spot. Use them in retail displays, restaurant booths, museum displays, and convention center kiosks. These unique speakers feature easy installation and clever accessories such as pinpointed light or even targeted scents. |
|
Product Version: Unknown
2214 Downloads
|
|
|
 |
Price Industries Aluminum Transfer Grille
Transfer Grilles offer the largest free area possible with the option of a sight-proof or light-proof core. Transfer grilles are designed for use in doors and partitions to allow for smooth transfer of air between spaces. Such spaces include storage rooms and restrooms. |
No Rating |
Product Version: Revit MEP 2020
149 Downloads
|
|
|
 |
Price Industries Steel Transfer Grille
Transfer Grilles offer the largest free area possible with the option of a sight-proof or light-proof core. Transfer grilles are designed for use in doors and partitions to allow for smooth transfer of air between spaces. Such spaces include storage rooms and restrooms. |
No Rating |
Product Version: Revit MEP 2020
101 Downloads
|
|
|
 |
Afternoon ladies and gents......
Its been a few days since my last upload but i thought whats the heck, i'll treat you all.
Here we have a nice modern light chandelier. As with all my families i've added material parameters for the bulb, main material and glass shade.
I've also added a ceiling drop dimension parameter which is an instant parameter so you can have the same family in one model but at different heights.
THIS IS A FACE BASED FAMILY, SO TO LOAD ONTO A CEILING, OPEN UP THE CEILING LAYOUT AND LOAD ON FACE.
alot of people keep saying it only loads onto wall, no it doesnt. |
|
Product Version: Revit MEP 2014
20357 Downloads
|
|
|
 |
Fully parametric Door & Awning Window combination. The whole component schedules as a window, while the door is 'shared' and schedules as a door. Calculates and stores Vent area for Door & Window and Light area for Window, in Family Parameters 'VentArea" and "LightArea" - so that they can be scheduled. |
|
Product Version: Revit Architecture 2009
22821 Downloads
|
|
|
 |
SEE WHOLE TUTORIAL ON
https://youtu.be/vT4yXobzp7I
SEE WHOLE TUTORIAL OF WINDOW
https://youtu.be/LuIXSrg_1BM
SEE WHOLE TUTORIAL OF HANGING LIGHT
https://youtu.be/OY1HhuuR4Hc
|
No Rating |
Product Version: Revit Architecture 2016
114 Downloads
|
|
|
 |
With a glass-door cabinet you can show off as well as protect your glassware or your favourite collection.
Included Light and Dark timber finishes |
No Rating |
Product Version: Revit Architecture 2014
1720 Downloads
|
|
|
 |
My carriage style sconce is made of glass and white painted aluminum and can be mounted to entrance ways & garages. Use the floor plan to place component and set offset to 5’6”. I also have same style Carriage light for hanging from the ceiling. Use floor pan to place component and set offset to 6’8” |
|
Product Version: Revit Architecture 2013
20420 Downloads
|
|
|
 |
NEO® Systems- A new generation of interior luminaires constructed of glass and polished aluminum. Neo® is developed with a dedicated systems approach for total design freedom and specification flexibility for suspended, ceiling mount or surface mount applications. Precision reflector and Microprism diffuser technology is utilized to optimize output of T5 fluorescent sources. The utilization of all visible light is the key to the NEO® luminaire philosophy. |
No Rating |
Product Version: Revit Architecture 2010
8757 Downloads
|
|
|
 |
NEO® Systems- A new generation of interior luminaires constructed of glass and polished aluminum. Neo® is developed with a dedicated systems approach for total design freedom and specification flexibility for suspended, ceiling mount or surface mount applications. Precision reflector and Microprism diffuser technology is utilized to optimize output of T5 fluorescent sources. The utilization of all visible light is the key to the NEO® luminaire philosophy. |
|
Product Version: Revit Architecture 2010
12193 Downloads
|
|
|
 |
NEO® Systems- A new generation of interior luminaires constructed of glass and polished aluminum. Neo® is developed with a dedicated systems approach for total design freedom and specification flexibility for suspended, ceiling mount or surface mount applications. Precision reflector and Microprism diffuser technology is utilized to optimize output of T5 fluorescent sources. The utilization of all visible light is the key to the NEO® luminaire philosophy. |
No Rating |
Product Version: Revit Architecture 2010
5089 Downloads
|
|
|
 |
AVENUE STREET LIGHTING 36led
Art. S.3090N36 MODULES LED 4000K 220-240Vac 12614lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 9976lmRated input power: 107WLuminaire efficacy: 93lm/WElectronic ballast ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 66MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp fixed position . LOR -- POLE CONNECTIONPole mounted in painted aluminium with Ø 102 mm connection. ON REQUEST ADAPTOR for cylindrical poles Ø 76 mm.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H05RN-F cable. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Anthracite grey (cod.24). Weight: 18.96 Kg Glow Wire test: -- Exposed windage area : 0,06 m² ( 1000mm ), 0,05 m² ( 800mm ), 0,04 m² ( 645mm )LED circuit included.AVENUE PATENT PENDINGThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. |
No Rating |
Product Version: Revit Architecture 2018
799 Downloads
|
|
|
 |
This is light 3D object, meaning thet the geometry is simplified to maximum for better performance, yet with good enough graphical representation in all views. Cabinet under counter can be turned off so you can use one family for both - cabinets and/or countertops. Separate family just for countertop alone is only 36 kB smaller in size, so I thought it is more efficient to use just this one famlily for two cases. Dims are instance parameters which allows size adjustments by easy dragging and then precize it with manual input of values. This way speeds up work when designing spaces with many objets of this kind, like restaurant kitchens, etc.
The only thing is that dragging one of the ends along the long side may generate errors, in this case simply drag the other end. Or if you are able to fix this issue you are welcome to upload a corrected version. |
|
Product Version: Revit Architecture 2018
1603 Downloads
|
|
|
 |
This is based on the Lightyears Orient Pendant.
This family is FACE based so to attach to a ceiling simply go to ceiling plan, load in the family and select PLACE ON FACE.
I've given the light fitting a drop parameter and also 3 material types, Copper, Wood and Wire.
This is the link i sued for the wood shown in the render.
http://liatfurniture.com/wp-content/uploads/Dark-Mahogany_DMO-400x400.jpg
Hope it comes in useful |
No Rating |
Product Version: Revit MEP 2014
3249 Downloads
|
|
|
 |
Office phone booth, measuring 41.5"W x 43.3"W x 88.8"H for use for acoustic quality and privacy in office settings.
Dimensions are not parameter controlled and are based on the ROOM brand phone booth.
Parameters control materials (the light and dark color options are included as family types), visibility of door swing in plan, and visibility of a stool I included for reference.
This model is one I created for personal use, and is not created by the ROOM company.
More info here:
https://room.com/pages/office-privacy-booths
Keywords: office phone booth privacy call conference acoustic telephone |
No Rating |
Product Version: Unknown
3571 Downloads
|
|
|
 |
PARK SINGLE POLE H=3500mm
Art. S.7100N20 MODULES LED 4000K 220-240Vac 6000lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 4308lmRated input power: 46WLuminaire efficacy: 94lm/WElectronic ballast ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 65MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp fixed position . LOR -- POLERectangular extruded aluminum pole with inspection door. Steel zinc-plated mounting flange with stainless steel screws.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H07RNF cable. Single cable entry with PG13,5 (Ø 6÷12 mm) cable gland in PMMA. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 36.01 Kg Glow Wire test: -- Exposed windage area : 0,394 m² ( S.7100N ) Exposed windage area : 0,440 m² ( S.7110N )LED circuit included.PARK REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. |
No Rating |
Product Version: Revit Architecture 2018
698 Downloads
|
|
|
 |
2012 Mercedes SL R231 - With Parametric Settings: Roof Up or Down, Windows Up or Down. Defualt settings are with both set to the up position and the lights off. If you want to turn the lights one you'll need to change the appropriate listed light materials (fog, headlight, tail lights) to a Luminated Glass. Sorry it was a setting, but made the file to large to download. All materials are listed under SL R231 for easy location and changing.
NOTE: Autocad file to large to download
FILE TYPE: Revit 2012 64 bit |
|
Product Version: Revit Architecture 2012
21376 Downloads
|
|
|
 |
Download: http://focuslighting.bimobject.com/5703646100749
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
The H+M Pendant, designed by Christian Hvidt in 1976, is retro at its best with renewed design and technique. The new design has reduced the height of the pendant by 30 mm, and the new version appears light and simple and adjusts to its environment. The technical renovation has resultet in a new shade and a circular lamp type, giving a pleasant and regular light diffusion.
Available in matt white, black or graphite grey with either E27 base, housing without LED components or for Fluorescent HF 40 W/55 W |
|
Product Version: Unknown
23002 Downloads
|
|
|
 |
Complete parametric Clopay model 3150 door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 3150 - 1-3/8" thick sectional overhead garage door with 27 gauge light ribbed exterior steel and polystyrene insulation. R-value 6.5. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com. |
No Rating |
Product Version: Revit Architecture 2011
10084 Downloads
|
|
|
Search