 |
Series FS-740 12 in. (305mm) square x 8 in. (203mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit Structure 2014
163 Downloads
|
|
 |
Series FS-760 12 in. (305mm) round x 8 in. (203mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit Structure 2014
206 Downloads
|
|
 |
Series FS-770 4 in. x 8 in. (102 x 203mm) rectangular x 4 in. (102mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit Structure 2014
160 Downloads
|
|
 |
Series FS-710 8 in. (203mm) square x 6 in. (152mm) deep sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit Structure 2014
103 Downloads
|
|
 |
Series FS-750 12 in (305mm) square x 10 in (254mm) deep sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit Structure 2014
86 Downloads
|
|
 |
Series FS-850 16 in(406mm) square x 12 in (305mm) deep flanged sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate,aluminum dome bottom strainer, and no hub outlet. |
No Rating |
Product Version: Revit Structure 2014
76 Downloads
|
|
 |
Series FS-720 8 in (203mm) round x 6 in (152mm) deep cast iron sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (MJ) |
No Rating |
Product Version: Revit Structure 2014
132 Downloads
|
|
 |
Modern Hand wash basin with Mixer Tap.
link to the sink i've modelled it from
http://www.amazon.co.uk/Modern-Bathroom-Freestanding-Stone-Basin/dp/B00LPN9UFM |

|
Product Version: Revit MEP 2014
56090 Downloads
|
|
 |
SERGIO ROMA - Round Gooseneck Sink Mixer
WELS Rating: WELS star rating
Supplied with: 35mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
No Rating |
Product Version: Revit Architecture 2011
4765 Downloads
|
|
 |
SERGIO VELO - Oval Gooseneck Sink Mixer
WELS Rating: WELS star rating
Supplied with: 35mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|

|
Product Version: Revit Architecture 2011
4045 Downloads
|
|
 |
SERGIO URBA - Square Goosemeck Sink Mixer
WELS Rating: WELS star rating
Supplied with: 35mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
No Rating |
Product Version: Revit Architecture 2011
4373 Downloads
|
|
 |
SERGIO EGO - Sink Mixer
WELS Rating: WELS 3 star rating
Supplied with: 40mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
No Rating |
Product Version: Revit Architecture 2011
5345 Downloads
|
|
 |
SERGIO YOURKE - Coil Sink Mixer
WELS Rating: WELS star rating
Supplied with: 35mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|

|
Product Version: Revit Architecture 2011
6073 Downloads
|
|
 |
SERGIO EGO SPRAY - Sink Mixer with Pull-out Spray
WELS Rating: WELS 3 star rating
Supplied with: 40mm SERGIO Ceramic Cartridge
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|

|
Product Version: Revit Architecture 2011
4033 Downloads
|
|
 |
I was too hesitant to upload this family without properly checking that it flexes properly. I appologize for the confusion. This is a line based kitchen cupboard family as a generic model. The cupboards can be used in a very quick way to draft 3D cupboards inside your model and have them depict somehwat correctly in sections and plan views. There are two other very similar families which I uploaded. They are similar, but do NOT flex properly if you need to convert to imperial measurments. I am pretty sure this version will be ok. I altered some of the family parameters and constraints to better array and alter the width of the door panels, no matter what length the cupboard is. With the tweaking and fixing, this family can also be used as line based wardrobes. I included a wardrobe type within the family. I hope the owners of this site could implement a "replace" function for uploaders to better serve those downloading! |

|
Product Version: Revit Architecture 2015
7514 Downloads
|
|
 |
This family is a simple parameter-controlled solid surface vanity (based on Swanstone dimensions).
Family includes both surface-mounted and wall-mounted faucents, which can be toggled on/off with Type Parameters. Faucet uses Symmons faucets, which can be switched out by editing the family if needed.
Vanity dimensions, backsplashes, faucets, meterials and basin offset can all be controlled with parameters.
Family does not include casework below.
Simple Look in plan/elevation works for a lot of our uses-- hopefully it'll help you too!
Thanks
Keywords: Counter, Sink, Faucet, Solid Surface, Vanity, Bathroom |
No Rating |
Product Version: Revit Architecture 2020
3175 Downloads
|
|
 |
Series ISCA-550 floor mounted service sink carrier with heavy gauge epoxy coated steel offset uprights with welded feet, epoxy coated cast iron fitting, no hub waste and vent connections (specify size), epoxy coated cast iron compression seal faceplate assembly with steel mounting brackets, adjustable ABS nipple with integral test cap and neoprene fixture gasket, plated hardware and chrome cap nuts. |
No Rating |
Product Version: Revit MEP 2014
60 Downloads
|
|
 |
Series ISCA-560 floor mounted service sink carrier with heavy gauge epoxy coated steel offset uprights with welded feet, epoxy coated cast iron fitting, no hub waste and vent connections (specify size), epoxy coated cast iron compression seal faceplate assembly with steel mounting plate and brackets, adjustable ABS nipple with integral test cap and neoprene fixture gasket, plated hardware and chrome cap nuts. |
No Rating |
Product Version: Revit MEP 2014
57 Downloads
|
|
 |
The Brookfield 60", double sink, Antique Black vanity by James Martin Furniture features hand-carved accenting filigrees and raised panel doors. Two doors, on either side, open to shelves for storage below and three center drawers, made up of a lower double-height drawer and both middle and top standard drawers, offer additional storage space. The look is completed with Antique Brass finish door and drawer pulls. Each cabinet is configured to work with our variety of either 2cm, 3cm, or a 4 cm countertops. The matching decorative wood backsplash is included. |
No Rating |
Product Version: Revit Architecture 2020
6342 Downloads
|
|
 |
Modelled this morning. The fruit bowl is not based on any specific bowl but one i've created.
The links to the fruit skins i used are below.
Orange http://www.psd-dude.com/tutorials/resources-images/food-organic-textures-for-designers-part-1/fruit-orange-skin-pattern.jpg
Apple https://thumbs.dreamstime.com/t/background-green-apple-19976736.jpg
A nice little addition to a kitchen/living room render.
Enjoy |

|
Product Version: Revit MEP 2014
40653 Downloads
|
|
 |
Dyson Airblade™ Tap 110-120V Hand Dryer - Short AB09 With Airblade technology in a tap, hands can be dried at the sink in 14 seconds. Water isn't dripped on the floor with Dyson Airblade Tap hand dryer because you don't need to move to a separate drying area. Costs less to run and has a small carbon footprint compared to other hand dryers. Dyson Airblade saves space and features touch-free operation. Ideal for minimalistic restrooms, new or fully-refurbished. 11-5/8"W x 11-2/16"D x 6-1/4"H. Stainless steel finish. 5-year parts and 5-year labor limited manufacturers warranty. |
No Rating |
Product Version: Revit Architecture 2018
1223 Downloads
|
|
 |
MIFAB® Series MC-62 floor mounted service sink carrier with two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet, and lacquered cast iron fitting with no hub waste and vent connection (specify size of each). Complete with lacquered cast iron faceplate assembly, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors and polished chrome plated finishing cap nuts. |
No Rating |
Product Version: Unknown
24 Downloads
|
|
 |
SIOUX CHIEF MANUFACTURING
Square Max™ PVC Square Floor Sink -Face Based
siouxchief.com |

|
Product Version: Revit Architecture 2010
415 Downloads
|
|
 |
SIOUX CHIEF MANUFACTURING
Square Max™ PVC Square Floor Sink -Face Based
siouxchief.com
|

|
Product Version: Revit Architecture 2010
888 Downloads
|
|
 |
SIOUX CHIEF MANUFACTURING
Square Max™ PVC Square Floor Sink -Face Based
siouxchief.com
|

|
Product Version: Revit Architecture 2010
681 Downloads
|
|
 |
SERGIO Urbane 1/2 Bowl Only
Overall Measurements: 220x450mm
Bowl Size: 170x400x140mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with:Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
642 Downloads
|
|
 |
SERGIO Urbane 1/2 Bowl #2 Only
Overall Measurements: 250x450mm
Bowl Size: 200x400x140mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
552 Downloads
|
|
 |
SERGIO Urbane 3/4 Bowl Only
Overall Measurements: 290x450mm
Bowl Size: 340x400x200mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
1090 Downloads
|
|
 |
SERGIO Urbane Extra Large Bowl Only
Overall Measurements: 750x450mm
Bowl Size: 700x400x200mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
1490 Downloads
|
|
 |
SERGIO Urbane Standard Bowl Only
Overall Measurements: 450x450mm
Bowl Size: 400x400x200mm
Bowl #2 Size: -
Material: 304 Grade Stainless Steel
Gauge: 1.2mm
Internal Bowl Radius: 25mm
Supplied with: Basket Waste and Overflow Kit
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO. |
No Rating |
Product Version: Revit Architecture 2011
869 Downloads
|
|