This American Woodmark model is their double oven, 90" high, 2 butt doors, 1 shelf, 1 drawer cabinet.  American Woodmark offers this cabinet in three widths: 27", 30", and 33" and those are the three family types.  All doors and the drawer operate independently.  The oven width for each cabinet size is preset to the published size, but I've exposed the oven opening parameters as instance parameters if you want to cut a custom opening.

The best practice for operating the doors is to open and close them in angular increments of something less than 90° in a single operation. For example, if you want to open them to 90°, you could open them initially to 50° and then go to 90°.  Close them the same way.

No Rating

Product Version: Revit Architecture 2013

3088 Downloads

Here are some horizontally opposed Freight Elevator Doors that we had to create here at Gensler Phoenix due to the lack of anyone else having created them.

Product Version: Revit Architecture 2008

8372 Downloads

This casework family is over the top!  There are the usual casework dimensions, but in addition, there are instance parameters to open the doors, pull out the top drawer, and slide out the two shelves hidden behind the doors, all individually controlled.  There are dedicated materials assigned by casework subcategories.  The model is replete with pots and pans sitting on the sliding shelves.  There are ten predefined widths.  At the narrower sizes, you'll see the pots and pans sticking out through the cabinet sides, so if you want, for instance, a 21" unit, you'll have to edit the family to remove or reposition them.  The unit is modelled on the American Woodmark line of cabinets.  The properties URL will take you to the American Woodmark web site.  This is a complex model.  I have tested it thoroughly, but if there are any difficulties, please leave a note for me.

I have updated this model.  It has more subtle engraving on the doors, curved handles, and the doors open more reliably.  Open them in angular increments of something less than 90°.  For example, if you want them opened to 90°, do it in two operations with the first angle 70° and the next 20°.  Close them the same way.

Product Version: Revit Architecture 2013

7449 Downloads

This American Woodmark model is their double oven, 96" high, 2 butt doors, 2 shelves, 1 drawer cabinet. American Woodmark offers this cabinet in three widths: 27", 30", and 33" and those are the three family types. All doors and the drawer operate independently. The oven width for each cabinet size is preset to the published size, but I've exposed the oven opening parameters as instance parameters if you want to cut a custom opening.

The best practice for operating the doors is to open and close them in angular increments of something less than 90° in a single operation. For example, if you want to open them to 90°, you could open them initially to 50° and then go to 90°. Close them the same way.

No Rating

Product Version: Revit Architecture 2013

3228 Downloads

This casework family is an American Woodmark base cabinet with two doors, one deep roll out tray, one drawer, and an adjustable shelf.  The doors can be opened individually, the tray can be rolled out, the drawer can be pulled open, and the shelf can be moved up and down.  The shelf even has clips holding it in place!  The URL opens the catalog that contains the three available widths.  The pre-defined materials are assigned through casework sub-categories.

No Rating

Product Version: Revit Architecture 2012

5797 Downloads

Glass Display  model based on IKEA Dotolf Glass Display Case

No Rating

Product Version: Revit Architecture 2019

5955 Downloads

Modern Spiral Glass Chandelier - Globe Shape Light Fixture with Curved Panels of Glass Spiraling Down + Up a Central Axis.

Visit my website at http://www.4u2cdesign.com

No Rating

Product Version: Revit Architecture 2010

6374 Downloads

This is a family of American Woodmark 90" high, 4 butt doors, adjustable shelves utility cabinets. The family includes the three widths offered: 24", 30", and 36" in 12" and 24" deep models. The doors operate independently.

The best practice for opening and closing the doors is to swing them in angular increments of something less than 90°.

No Rating

Product Version: Revit Architecture 2013

2406 Downloads

Parametric single glass block opening.  Tried some other sinlg glass blocks on this site and they didn't cut holes in the wall, where this one will. 

Product Version: Unknown

9673 Downloads

This one is with open doors, I also uploadet another one with closed doors

No Rating

Product Version: Revit Architecture 2012

7176 Downloads

Glass stainless steel handrail bracket with adjustable glass thickness

Product Version: Revit Architecture 2009

4940 Downloads

stain, glass, window, awesome, glass, spanish

No Rating

Product Version: Revit MEP 2016

5070 Downloads

stain, glass, window, awesome, glass, spanish

No Rating

Product Version: Revit MEP 2016

2309 Downloads

Open base cabinet with no doors

No Rating

Product Version: Unknown

1014 Downloads

This is a single glass pocket door. The door can be changed so the glass is translucent. Sizing is a usual for any Revit object.

Product Version: Revit Building 9

16533 Downloads

This is a single oven, 84" high, 4 butt door base cabinet from American Woodmark.  It comes in two widths:  27" and 30" and those are the two family types.  The oven opening width and height parameters are preset in accordance with the published sizes, but I've exposed them as instance parameters so they can be adjusted beyond those sizes.  The doors open.  The best practice for opening and closing the doors is to do it in angular increments of something less than 90°.  If you open a door to 90°, it may open but there is a good chance it will not close.

No Rating

Product Version: Revit Architecture 2013

1848 Downloads

Mr GG s metric doors with handles

Product Version: Unknown

2005 Downloads

Metal frame doors - detailed frames with stops.  Standard size frames with frame depth 4 3/4" to 8 3/4".  Can adjust setback from wall face - default 1/8".  Rough openings will include frame width.

No Rating

Product Version: Revit Architecture 2010

1449 Downloads

Ultrascreen Australia screen, as unhosted Component, to be added to inside of doors, for openings up to 2.4m high x 1.7m wide. Standard version only allows screen open or closed, reflected in Revit family.

No Rating

Product Version: Revit Architecture 2008

4720 Downloads

glass - double acting

Product Version: Revit Building 5.1

16932 Downloads

Glass door refridgerator, used to display merchandise

Product Version: Revit Architecture 2011

5380 Downloads

glass - double acting

Product Version: Revit Building 5.1

10266 Downloads

Marvin's commercial double door family that is not on their website - created by modifying Marvin residential double door family

Product Version: Revit Architecture 2011

19657 Downloads

glass - no trim

No Rating

Product Version: Revit Building 5.1

17148 Downloads

glass - no trim

Product Version: Revit Building 5.1

2394 Downloads

glass - no trim

No Rating

Product Version: Revit Building 5.1

4730 Downloads

Face Based, non-parametric, glass color by type, generic model.

No Rating

Product Version: Revit Architecture 2015

469 Downloads

Morning guys, heres a quick Modern Glass dining table.

This is parametric in length and width, and has 3 materials families, 2 glass and the steel feet/main support.

Hope you guys like it and it comes in useful for you on your projects.

Have a good week

Product Version: Revit MEP 2014

10031 Downloads

Double Flush Doors w/ HM DW Frame

No Rating

Product Version: Revit Architecture 2008

2918 Downloads

Fully parametric interior wood french doors with wood frames modified from Marvin exterior door family - adjustable size, swing, trim, muntins, materials...trim can also be turned off to incorporate door into sidelight/transom system (detailed sidelight to come)

For those who want a detailed interior door that makes door details so much easier!

Product Version: Revit Architecture 2011

14214 Downloads