This is a family of American Woodmark 84" high, 2 doors, adjustable shelves utility cabinets. The family includes the three widths offered: 12", 15", and 18" in 12" and 24" deep models. The doors operate independently.

The best practice for opening and closing the doors is to swing them in angular increments of something less than 90°.

No Rating

Product Version: Revit Architecture 2013

2873 Downloads

This is a family of American Woodmark 90" high, 2 doors, adjustable shelves utility cabinets. The family includes the two widths offered: 15" and 18" in 12" and 24" deep models. The doors operate independently.

The best practice for opening and closing the doors is to swing them in angular increments of something less than 90°.

No Rating

Product Version: Revit Architecture 2013

2058 Downloads

Parametric hollow metal doors w/ un-equal leafs and customized door schedule. Due to the asymmetrical nature of this type of doors; Ideally, there should have two families, one for the left active door, one for the right. This one is only show a quick way for how to create this type of door. If you like it, you can download the door families in  the drawings "Adjustable Hollow Metal Doors for CMU and Stud Walls", and "Adjustable Hollow Metal Doors-Improved Version" as bases, adding/modify parameters as you need, and creat your own set of parametric door families. Enjoy!

Product Version: Revit MEP 2009

7254 Downloads

This is a family of American Woodmark 96" high, 4 butt doors utility cabinets. The family includes three widths at 24" deep: 24", 30", and 36"; and one width at 12" deep:  24". The doors operate independently.

The best practice for opening and closing the doors is to swing them in angular increments of something less than 90°.

No Rating

Product Version: Revit Architecture 2013

2407 Downloads

This is a family of American Woodmark 84" high, 4 butt doors, adjustable shelves utility cabinets. The family includes the three widths offered: 24", 30", and 36" in 12" and 24" deep models. The doors operate independently.

The best practice for opening and closing the doors is to swing them in angular increments of something less than 90°.

Product Version: Revit Architecture 2013

5585 Downloads

arched doors

Product Version: Revit Architecture 2008

26776 Downloads

Parametric folding curtain wall doors. Based on fabioloretti's folding doors. 

Product Version: Unknown

99999 Downloads

www.REVITCARS.com this is a parametric car, enjoy swapping from 3 doors to 5 doors. Hand traced to the finest quality.

Product Version: Unknown

32893 Downloads

8 Pane Bifold doors, ideal for opening onto outdoor area

Product Version: Revit Architecture 2010

23697 Downloads

www.REVITCARS.com this is a parametric car, enjoy swapping from 3 doors to 5 doors. Hand traced to the finest quality.

Product Version: Unknown

10430 Downloads

www.REVITCARS.com this is a parametric car, enjoy swapping from 3 doors to 5 doors. Hand traced to the finest quality.

Product Version: Unknown

7617 Downloads

www.REVITCARS.com this is a parametric car, enjoy swapping from 3 doors to 5 doors. Hand traced to the finest quality.

Product Version: Unknown

5068 Downloads

www.REVITCARS.com this is a parametric car, enjoy swapping from 3 doors to 5 doors. Hand traced to the finest quality.

No Rating

Product Version: Unknown

6682 Downloads

Ultrasceen Australia screens, as Components, modelled as unhosted, to be added to inside of doors, especially larger openings.

No Rating

Product Version: Revit Architecture 2008

979 Downloads

I'M RE-POSTING THESE DOORS AFTER FIXING SOME ERRORS.

Fully parametric interior wood french doors with wood frames modified from Marvin exterior door family - adjustable size, swing, trim, muntins, materials...trim can also be turned off to incorporate door into sidelight/transom system (detailed sidelight to come)

For those who want a detailed interior door that makes door details so much easier!

Product Version: Revit Architecture 2011

16719 Downloads

Simple doors

No Rating

Product Version: Revit Architecture 2008

1779 Downloads

Fully parametric 6-panel by-pass doors. Created using the Single Panel 4 theme.

No Rating

Product Version: Revit Architecture 2011

10694 Downloads

Frameless glass pool fence

Line Based.

Updated to include height parameter

To be used in conjunction with Glass pool gate

If you edit family and replace glass length formula with:

(Length - (No. of Panels - 1) * 10 mm) / No. of Panels

you will get equal gaps (10mm) between each peice of glass

Product Version: Unknown

11982 Downloads

Storefront Entry Double Doors- Curtain Panel.  This is similar to the Autodesk version but with push-pull handles and additional parameters- Fully Parametric.

Product Version: Revit Architecture 2009

36475 Downloads

Wall Based Closet, fully parametric, with option to choose between 2 or 3 doors. All objects have a material parameter, but no materials are uploaded.

Comments and Suggestions are welcomed =)

Product Version: Revit Architecture 2009

64474 Downloads

Internal double doors with planted door stop

Product Version: Revit Architecture 2014

17700 Downloads

Hollow metal doors with adjustable width, swing angle, setback, frame depth and customized door schedule.

No Rating

Product Version: Revit Architecture 2009

9060 Downloads

This casework family is a model of American Woodmark's two doors with batten, one drawer, pot and pan organizer base cabinet. All components operate independently with instance parameters. The single width offered by American Woodmark, 33", is included as a family type.  The URL will open the catalog wherein you can find this cabinet.  I've noticed that sometimes the doors, if opened to 90°, will not close to 0° if you have just the family open.  If this happens, close the doors to something other than 0° and then go to 0°.  This does not happen with the family when it is inserted into a project.

No Rating

Product Version: Revit Architecture 2012

3212 Downloads

This American Woodmark model is their single oven, 96" high, 4 butt doors with 2 shelves cabinet. American Woodmark offers this cabinet in three widths: 27", 30", and 33" and those are the three family types. All doors operate independently. The oven width for each cabinet size is preset to the published size, but I've exposed the oven opening parameters as instance parameters if you want to cut a custom opening.

The best practice for operating the doors is to open and close them in angular increments of something less than 90° in a single operation. For example, if you want to open them to 90°, you could open them initially to 50° and then go to 90°. Close them the same way.

Product Version: Revit Architecture 2013

3769 Downloads

This simple night stand has the option of doors or open space below the drawer. There are also many variable parameters. Part of an 8 piece bedroom suite.

No Rating

Product Version: Revit Architecture 2010

13942 Downloads

Double timber framed doors with architrave to both exterior and interior sides. Also includes adjustable swings, materials, and all members.

Product Version: Unknown

7107 Downloads

This American Woodmark model is their single oven, 84" high, 4 doors with battens cabinet.  American Woodmark offers this cabinet in two widths:  30" and 33" and those are the two family types.  All doors operate independently.  The oven width for each cabinet size is preset to the published size, but I've exposed the oven opening parameters as instance parameters if you want to cut a custom opening.

The best practice for operating the doors is to open and close them in angular increments of something less than 90° in a single operation.  For example, if you want to open them to 90°, you could open them initially to 50° and then go to 90°.  Close them the same way.

No Rating

Product Version: Revit Architecture 2013

2126 Downloads

Desk with glass doors, styles on sides and two tone wood top.

Product Version: Unknown

22206 Downloads

This American Woodmark model is their single oven, 90" high, 4 butt doors with shelf cabinet.   American Woodmark offers this cabinet in three widths:   27", 30", and 33" and those are the three family types. All doors operate independently. The oven width for each cabinet size is preset to the published size, but I've exposed the oven opening parameters as instance parameters if you want to cut a custom opening.

The best practice for operating the doors is to open and close them in angular increments of something less than 90° in a single operation. For example, if you want to open them to 90°, you could open them initially to 50° and then go to 90°.  Close them the same way.

Product Version: Revit Architecture 2013

2305 Downloads

This American Woodmark model is their double oven, 84" high, 2 butt doors, 1 drawer cabinet.   American Woodmark offers this cabinet in two widths: 27" and 30" and those are the two family types.   All doors and the drawer operate independently.   The oven width for each cabinet size is preset to the published size, but I've exposed the oven opening parameters as instance parameters if you want to cut a custom opening.

The best practice for operating the doors is to open and close them in angular increments of something less than 90° in a single operation. For example, if you want to open them to 90°, you could open them initially to 50° and then go to 90°. Close them the same way.

No Rating

Product Version: Revit Architecture 2013

4356 Downloads