FIXED

Wall based, double door opening & shelf for a cool room display for a bottle shop or store.

Glass door with stainless steel frame, shelving and handle. 4 shelves that with heights that adjust automatically.

Height, width, offset from floor, shelf depth, handle height and handle size are all PARAMETRIC.

Product Version: Unknown

14546 Downloads

Parametric double door

Product Version: Unknown

11036 Downloads

Simple Door Hood Family  - Wall Based - Parametric For Width

No Rating

Product Version: Revit Building 9.1

1648 Downloads

Sliding patio door with separate material parameters for interior and exterior trim

Product Version: Revit Architecture 2008

93052 Downloads

A great door for space planning, early design, existing conditions, & tracing 2D CAD dwgs. ELIMINATES THE NEED FOR DOZENS OF DOORS! Features: Frame automatically adjusts to wall thickness Adjustable door thickness Adjustable width / height width adjustments can be done with the align tool! width & height show up on schedule All parameters are "instance parameters" which cuts down on the need to have dozens of doors in your project.

Product Version: Unknown

18443 Downloads

This dutch door family is parametric and has an adjustable swing

Product Version: Unknown

12513 Downloads

I needed a six panel sliding glass door (outside two panels are stationary) that fit within 36' so here it is

Product Version: Unknown

14408 Downloads

I needed a six panel sliding glass door (outside two panels are stationary) that fit within 36' so here it is

Product Version: Unknown

7597 Downloads

The triple door is preset with door widths ranging from 1'-6" to 2'-6" in 2" increments and heights 6'-8", 7'-0" and 8'-0" through the type selection. The types can easily be redefined including door thickness. Also, the trim and sill can be turned on/off parametrically.

Product Version: Revit Architecture 2010

1968 Downloads

This American Woodmark casework family is a one door, one drawer, two deep roll out trays base cabinet.  All components operate independently.  Materials are pre-defined and assigned via casework subcategories.  The door is reversible.  The five widths offered by American Woodmark are included as family types.  The URL opens the catalog wherein you can find this cabinet.

I've upgraded this model.  The door opens more reliably.  Best practice for operating it is to open and close it in angular increments of something less than 90°.

Product Version: Revit Architecture 2013

4787 Downloads

According Door

Product Version: Unknown

4717 Downloads

Parameters include:

Opening Angle, Door Height, Opening Width, Panel Thickness, Jamb Depth, Handle Position, Handle Size, etc.

Product Version: Revit Structure 2011

16096 Downloads

Four equal width panes, Aluminum and tempered glass door. Trim width and projectiion,rail and stile width adjustable. Metric.

Product Version: Revit Architecture 2008

65109 Downloads

Fully parametric revolving door with 3 rotating panels

No Rating

Product Version: Revit Architecture 2015

8400 Downloads

Arched pocket door, parametric height and width, materials.

Product Version: Revit Architecture 2013

20470 Downloads

parametric 6 panel multi door with glass ( nana wall )

No Rating

Product Version: Revit Architecture 2009

14020 Downloads

Hollow metal doors with adjustable swings and single rabbit frames.  Flush, narrow light, half light and full light door types.

No Rating

Product Version: Unknown

1337 Downloads

This steel d/door is fully parametric including mesh and threshold and L steel angle. You may change profile to suite your need.

No Rating

Product Version: Revit Architecture 2016

6043 Downloads

Fully Adjustable  Change door material in properties for metal or wood.

No Rating

Product Version: Revit Building 9

2420 Downloads

DOWNLOAD THE NEW VERSION!

THAT IS THE REAL DOOR ELEMENT!

No Rating

Product Version: Revit MEP 2010

3004 Downloads

parametric door which we can show that opened or closed

Product Version: Revit Architecture 2019

1043 Downloads

Updated version for DEWA Substation Door, visibility option is added to switch between opened and closed state. Revit Version 2022

No Rating

Product Version: Unknown

220 Downloads

Double action 1 1/2 door (metric), using Pacific Doors DA steel frame (NZ).  Internal use.  Parametric vision panel

No Rating

Product Version: Revit Architecture 2009

6822 Downloads

This is the header, king stud, and jack stud for a door or window family.

The top and bottom extents of the header are determined by levels like a column.

There are options to create double king studs and double jack studs if the header becomes large enough, but the formula for those visibility parameters can be removed and the visibility can instead be controlled on an instance basis.

It can be nested into a door/window family or used independently in a structural framing project.

Product Version: Revit Architecture 2018

812 Downloads

Double Door As shown in the picture with parameters like width,panel width, frame, height, sill height, gap, bottom offset,etc. It also gives four differnt material Parameter.

No Rating

Product Version: Revit Architecture 2014

6337 Downloads

Residential entry door similar to one made by Masonite.  The family includes several sizes.  The glass will not have a design unless you add a relief to the glass in the material dialog box.

Product Version: Revit Architecture 2013

14892 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

Product Version: Revit Architecture 2018

481 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

243 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.

4. window shutters are multy lite shutters & number of lites can be set.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

232 Downloads

I created a simple half-door that can be used if you need it for whatever project you are working on.  Will show as standard swing on your floor plan. 

No Rating

Product Version: Revit Architecture 2016

916 Downloads