 |
Simple adjustable Bilco basement bulkhead |
No Rating |
Product Version: Revit Architecture 2020
2251 Downloads
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
80 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
69 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
82 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
69 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
77 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
129 Downloads
|
|
|
 |
Go to http://www.kolbe-kolbe.com/products/index.cfm?pcID=4&pID=70&pCat=24&pSubCat=0&pl=150 for more families and components of the VistaLuxe Collection.
For product-related questions, please email architects@kolbe-kolbe.com |
|
Product Version: Revit Architecture 2012
1835 Downloads
|
|
|
 |
Download: http://bimobject.com/en/swedoor-jeld-wen/product/int_door_hp_40_sliding_int_double
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
This is a high performance (HP) interior sliding double door range, built for professional demands. A wood-based door construction combined in a pocket frame. These doors are only offered unclassified. |
|
Product Version: Revit Architecture 2015
1085 Downloads
|
|
|
 |
Almost fully parametric. Height, width, frame size, handle height. Frame, door panels - materials.
Please leave comments and suggestions. |
No Rating |
Product Version: Revit Architecture 2012
6351 Downloads
|
|
|
 |
Gloss Brass Handle, Lock set, Latch & Mounting PLate. Place in Floor plan with an offset of 3'3" |
|
Product Version: Unknown
2420 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for zip files of all our Kolbe Revit models. |
|
Product Version: Revit Architecture 2010
2238 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for zip files of all our Kolbe Revit models. |
No Rating |
Product Version: Revit Architecture 2010
2428 Downloads
|
|
|
 |
Go to http://www.kolbe-kolbe.com/products/index.cfm?pcID=4&pID=70&pCat=24&pSubCat=0&pl=150 for more families and components of the VistaLuxe Collection.
For product-related questions, please email architects@kolbe-kolbe.com |
No Rating |
Product Version: Revit Architecture 2012
654 Downloads
|
|
|
 |
Go to http://www.kolbe-kolbe.com/products/index.cfm?pcID=4&pID=70&pCat=24&pSubCat=0&pl=150 for more families and components of the VistaLuxe Collection.
For product-related questions, please email architects@kolbe-kolbe.com |
|
Product Version: Revit Architecture 2012
920 Downloads
|
|
|
 |
Download: http://bimobject.com/en/nabco/product/gt1175_telescopic
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
The NABCO GT1175 Telescopic Sliding Door puts your mind at ease when looking for an automatic door solution and limited space is a concern. |
No Rating |
Product Version: Unknown
1675 Downloads
|
|
|
 |
Almost fully parametric. Height, width, frame size, handle height. Frame, door panels - materials.
Please leave comments and suggestions. |
No Rating |
Product Version: Revit Architecture 2012
4176 Downloads
|
|
|
 |
Coalesse - Denizen A collection of modern casegoods that fit as easily in home as office settings and a new way of thinking about how the traditional office should be. COALESSE |
|
Product Version: Revit Architecture 2009
3119 Downloads
|
|
|
 |
Coalesse - Denizen A collection of modern casegoods that fit as easily in home as office settings and a new way of thinking about how the traditional office should be. COALESSE |
|
Product Version: Revit Architecture 2009
2969 Downloads
|
|
|
 |
Coalesse - Denizen A collection of modern casegoods that fit as easily in home as office settings and a new way of thinking about how the traditional office should be. COALESSE |
|
Product Version: Revit Architecture 2009
3476 Downloads
|
|
|
 |
Coalesse - Denizen A collection of modern casegoods that fit as easily in home as office settings and a new way of thinking about how the traditional office should be. COALESSE |
|
Product Version: Revit Architecture 2009
2671 Downloads
|
|
|
 |
Coalesse - Denizen A collection of modern casegoods that fit as easily in home as office settings and a new way of thinking about how the traditional office should be. COALESSE |
|
Product Version: Revit Architecture 2009
3286 Downloads
|
|
|
 |
Coalesse - Denizen A collection of modern casegoods that fit as easily in home as office settings and a new way of thinking about how the traditional office should be. COALESSE |
|
Product Version: Revit Architecture 2009
2673 Downloads
|
|
|
 |
Coalesse - Denizen A collection of modern casegoods that fit as easily in home as office settings and a new way of thinking about how the traditional office should be. COALESSE |
|
Product Version: Revit Architecture 2009
6636 Downloads
|
|
|
 |
Coalesse - Denizen A collection of modern casegoods that fit as easily in home as office settings and a new way of thinking about how the traditional office should be. COALESSE |
|
Product Version: Revit Architecture 2009
7732 Downloads
|
|
|
 |
Model :
304A
Category :
French doors
Width :
18", 20", 22", 24", 26", 28", 30", 32", 34", 36"
Height :
80"
Thickness :
1-3/8"
|
|
Product Version: Revit Architecture 2012
6496 Downloads
|
|
|
 |
I have taken the Revit Double Doors with glazing and Flipped the doors so that the cill is externall and the doors pull outwards.
this is the first time using paremeters, i would like to hear your comments. |
|
Product Version: Unknown
55235 Downloads
|
|
|
 |
Morning and afternoon peeps.
Latest and greatest model is a nice simple TV stand. Parametric in length and depth and 3 parametric materials can be changed. Overall wood, front doors and glass doors.
No TV or any other stuff with this model, just the stand.
Enjoy guys
Andy |
|
Product Version: Revit MEP 2014
56451 Downloads
|
|
|
 |
Porta de correr com duas folhas de madeira com veneziana, embutida na parede. Com parâmetro para visualizar a porta aberta e fechada e configuração de visualização em nível de detalhe baixo.
Made in Revit 2022. |
No Rating |
Product Version: Revit Structure 2020
75 Downloads
|
|
|
 |
Int-DblPocket-3 Panel-Craftsmans Casing.rfa |
No Rating |
Product Version: Unknown
1246 Downloads
|
|
|
Search