MINISTAGE ROUND SPOT

Art. S.1315W1 MODULES COB 3000K  220-240Vac 1225lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1040lmRated input power: 11.2WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEProjector. IP rating IP 66MATERIAL CHARACTERISTICSDie-cast EN AB-47100 aluminium housing with high corrosion resistance.Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCE99.98% pure aluminium reflectors, or with concentrating lenses: The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source. Clear toughened glass. LOR -- INSTALLATION AND MAINTENANCEThe tempered front glass diffuser is fixed externally to the fitting through silicon resin, perfectly flush with the front ring. Water and dirt deposits that can disturb the lighting performance of the projector can easily flow away. WIRINGSupply 5m cable section type FEP/FEP + PCP (Microstage and Ministage) or FLAT (Stage and Megastage) sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 1.73 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGN MICROSTAGE BLADE OF LIGHT PATENTED, REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

2371 Downloads

provides subtle light

great in any room

Product Version: Unknown

17842 Downloads

Light post with 6 lights. Parametric.

No Rating

Product Version: Revit Architecture 2017

2274 Downloads

ACO Drain W200/170 L4000

Product Version: Revit MEP 2015

10964 Downloads

http://plastec.com.au/wp-content/uploads/2018/09/18997-18977-Fact-Sheet.pdf

No Rating

Product Version: Revit MEP 2018

898 Downloads

More FREE Revit components available at www.urbimrevitcomponents.co.uk

Join us on Facebook to stay up to date on new Revit Component uploads at http://goo.gl/cTeiJO

Happy Reviting!!

No Rating

Product Version: Revit Architecture 2012

4309 Downloads

Fully parametric C section created in Revit Architecture 2012. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.

The family type is Structural Column.

For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology.

Product Version: Revit Architecture 2012

3954 Downloads

goose neck sign light

No Rating

Product Version: Revit Structure 2008

995 Downloads

This one is not sending any light upwards

Product Version: Unknown

6911 Downloads

2x2 Fluorescent Light Fixture

Product Version: Revit Architecture 2011

8220 Downloads

Wall Cabinet - 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• For offset from floor, adjust the "Offset from Floor" parameter under "Dimensions" category.


• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

6430 Downloads

Fully parametric U section created in Revit Architecture 2012. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.

The family type is Structural Framing.

For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology.

No Rating

Product Version: Revit Architecture 2012

1849 Downloads

MIFAB®  C1300-____ (select model number: C1300-UR for round terrazzo, C1300-US for square terrazzo) nickel bronze recessed access cover with nickel bronze frame, anchor lugs, and vandal resistant stainless steel screw(s).

No Rating

Product Version: Unknown

164 Downloads

Wall Cabinet - 2 Door above microwave shelf

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• For offset from floor, adjust the "Offset from Floor" parameter under "Dimensions" category.


• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

7039 Downloads

Tile surround and light source for realistic renderings

Product Version: Revit Architecture 2018

3291 Downloads

This is a floor based Generic Model.

No Rating

Product Version: Revit Architecture 2017

369 Downloads

floor based

No Rating

Product Version: Unknown

467 Downloads

Wall Cabinet - Open

 *** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• For offset from floor, adjust the "Offset from Floor" parameter under "Dimensions" category.


• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

4233 Downloads

The MI-100 is engineered for equal distribution of water to all ports. It’s the perfect solution to keep sewer gas from entering the building from seldom used floor drains. The MI-100 can be located anywhere in the water supply and is engineered to permit the building owner to adjust the frequency and amount of water delivery through a timer and stainless steel solenoid valve. A manifold ensures that a minimum of 2 ounces of water are delivered to every port over a twenty-four hour period. The unit must be mounted 12” above the finished floor for every 20’ of water supply line. The MI-100 can be installed with a cabinet cover. The system is capable of priming from 1 to 30 floor drain traps. The MI-100 is practical to serve many floor drain traps in infrequently used buildings such as convention centers and sports facilities. The MI-100 is made of lead free materials that touch water.

No Rating

Product Version: Unknown

200 Downloads

Complex, non parametric, accurate light output

Product Version: Unknown

7660 Downloads

Parametric controls give one more flexibility for ceiling or floor mounted units

Product Version: Revit Building 9.1

2284 Downloads

Floor-based storage units adapted from a sketchup model

No Rating

Product Version: Unknown

2436 Downloads

This one is a is fixed to the floor version to one downloaded from the website.

No Rating

Product Version: Revit Architecture 2009

2906 Downloads

Simple parametric microwave, classic look, floor based (adjust offset from floor), metric units (cm), specialty equipment category.  UPDATED (9/15/2012).

No Rating

Product Version: Unknown

4144 Downloads

It does have a light source even though it's not visible in the rendered picture, due to the exterior lighting.

Product Version: Revit Architecture 2010

4843 Downloads

steel tube construction with clear light green sheeting

No Rating

Product Version: Unknown

2366 Downloads

Fully parametric RY (slotted C) section created in Revit Architecture 2012. The RY profile is an exterior wall stud for high thermal performance walls. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.

The family type is Structural Column.

For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology.

No Rating

Product Version: Revit Architecture 2012

2579 Downloads

Floor hosted. Not parametric, but easily modified.

No Rating

Product Version: Revit Architecture 2018

3481 Downloads

Including three different length from manufacture. Light source is not illuminate

Product Version: Revit Architecture 2008

1659 Downloads

Aquaponics: dual level plantation with UV light and fishes for waste-fed plants

No Rating

Product Version: Unknown

1966 Downloads