|
|
Search Downloads
Search Results
 |
MIFAB® Series MC-10-27-37 (Specify L for left or R for right design) single, horizontal, adjustable, water closet carrier with lacquered, 37” (940) long barrel cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, 2” (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
20 Downloads
|
|
 |
This floor lamp features a side-line dimmer encased in a precision-milled housing, a stand-straight feature, a quick connect feature and an integrated porcelain socket design. Parameters include options for 5 finishes. Manufactured by Holtkötter. |
No Rating |
Product Version: Revit Architecture 2011
4682 Downloads
|
|
|
 |
The twin-light Chairside Reading floor lamp is the perfect solution for two light sources in one lamp. Both arms are independently adjustable and dimmable. Vertical adjustment of each arm from 40 to 57 inches with a maximum extension of 20 inches. Two turn-knob dimmers in easy reach adjust 100 Watt halogen bulbs by Osram in each arm. Parameters include options for 5 finishes. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
4916 Downloads
|
|
|
 |
The Viennese Kaffeehaus Series includes this floor lamp, which is equipped with the innovative Dimm-System *P1. Parameters include options for 3 finishes. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
7018 Downloads
|
|
|
 |
SIOUX CHIEF MANUFACTURING
Square Max™ PVC Square Floor Sink -Face Based
siouxchief.com
|
|
Product Version: Revit Architecture 2010
891 Downloads
|
|
|
 |
SIOUX CHIEF MANUFACTURING
Square Max™ PVC Square Floor Sink -Face Based
siouxchief.com
|
|
Product Version: Revit Architecture 2010
683 Downloads
|
|
|
 |
The most popular Holtkötter floor lamp for over 10 years. Parameters include options for 6 finishes. Manufactured by Holtkötter. |
No Rating |
Product Version: Revit Architecture 2011
2734 Downloads
|
|
|
 |
The twin-light Chairside Reading floor lamp is the perfect solution for two light sources in one lamp. Both arms are independently adjustable and dimmable. Vertical adjustment of each arm from 40 to 57 inches with a maximum extension of 20 inches. Two turn-knob dimmers in easy reach adjust 100 Watt halogen bulbs by Osram in each arm. Parameters include options for 5 finishes. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
6519 Downloads
|
|
|
 |
MIFAB® Series MC-15 single, vertical, fixed, water closet carrier with offset lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
16 Downloads
|
|
|
 |
AGRV-HRAL_SeriesC-Metal & Glass Railing
# Floor mounted railing
# rail support
We proivde 2 type of Railing in RVT : H120,H150
We also create a Baluster using the railing support familt, so you can place it manully.
Visit our website AgrvArchitect.com for more families
Because the rvt file is too big, so I put the file in here :
https://drive.google.com/file/d/1TIqQGfTZHJhLxvAHKhBZwEPG244N61jc/view?usp=sharing
|
No Rating |
Product Version: Revit Architecture 2018
1378 Downloads
|
|
|
 |
A component done with the Adaptive Railing Family File with 3 axis structure. To be add preferably on the 3D window, on TOP VIEW and arrange it on a floor window.
Pick the spot of the axis by it's sequence. Or add the sequence of new points in the family file.
Diameter of the railing - 50mm; circular form |
No Rating |
Product Version: Revit Architecture 2012
3090 Downloads
|
|
|
 |
MIFAB® Series MC-40D floor mounted exposed arm lavatory carrier with back to back white, lacquered, adjustable, cast iron exposed support arms.
Complete with back to back lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and mounting hardware. |
No Rating |
Product Version: Unknown
16 Downloads
|
|
|
 |
MIFAB® Series MC-10D-HS double, horizontal, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts. |
No Rating |
Product Version: Unknown
17 Downloads
|
|
|
 |
MIFAB® Series MC-10 (Specify -L for left or -R for right design) single, horizontal, adjustable, water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear
anchor tie down support. |
No Rating |
Product Version: Unknown
55 Downloads
|
|
|
 |
MIFAB® Series MC-41D-R floor mounted back to back concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” diameter x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
33 Downloads
|
|
|
 |
MIFAB® Series MC-41-R floor mounted concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” diameter x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
28 Downloads
|
|
|
 |
MIFAB® Series MC-42-R floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” diameter x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
46 Downloads
|
|
|
 |
MIFAB® Series MC-42 floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
23 Downloads
|
|
|
 |
MIFAB® Series MC-42D back to back floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, tie rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
18 Downloads
|
|
|
 |
MIFAB® Series MC-42D back to back floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, tie rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
16 Downloads
|
|
|
 |
MIFAB® Series MC-42D back to back floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, tie rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
25 Downloads
|
|
|
 |
Download: http://bimobject.com/en/hyllteknik-en/product/fsslw7wsonse
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
The free standing shelving system can be located next to a wall (L-frames), or used free standing in the room (T-frames), for the most effective use of floor space. The uprights and other metal parts are available powder coated in Hylltekniks colours: T1 |
|
Product Version: Unknown
3670 Downloads
|
|
|
 |
Download: http://skandiform.bimobject.com/LB-605
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
Table in solid oak or walnut. Stained oak as option. Table top in tempered smoked glass. Designer: Hanne Kortegaard. “The distinctive, star-like appearance of Conica table establishes a link between the three elements of tabletop, legs and floor. The proportions of the design provide stability and add to the impression of strength that the unconventional construction of this table conveys.” |
|
Product Version: Unknown
3591 Downloads
|
|
|
 |
Download: http://bimobject.com/en/greatlakes/product/gl480es-2442
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
ES Server Enclosure - GL480ES-2442
Dimensions: 48.00"H x 24.00"W x 42.00"D
Rack Spaces: 24 RMU, 19" EIA 310-E Compliant
Weight Capacity: 2000 lbs. on levelers, bolted to floor, or on casters
Stock Color: Black
Shipping Weight: 300 lbs.
Shown with optional accessories |
|
Product Version: Unknown
2607 Downloads
|
|
|
 |
Contents:
Cabinet with doors
- Dimensions are parametric, depth, height, width, handle placement
- Materials: cabinet, door, handle
Cabinets Drawers
- up to five drawers with visibility
- dimensions are parametric; depth, height, width, drawer height
- drawers automatically drop down 5 mm under the above drawer this is fixed at the moment a new version might get this dynamic.
- Materials are parametric
Plinth
- Parametric dimensions (instance) material parameter.
Worktop L shape (with/without sink)
- Lengths, depths, heights, and thickness all instance parametric
Worktop I shape (with/without sink) Lengths, depths, heights, and thickness all instance parametric
Misc parts face based
- Stove electric: fixed dimensions, parametric materials (4 or 5 cooking pits with visibility parameter)
- coffee machine based upon Phillips Coffee pad machine: fixed dimensions, parametric materials
- coffee mug: fixed dimensions, parametric materials
- Microwave; fixed dimensions, parametric materials
- faucet: fixed dimensions, parametric materials based upon an old Sphinx one
Misc generic model
- Sink: parametric (instance) dimensions and height based upon floor height.
For any qeustions, 'bugs' etc. contact me by personal message
disclaimer: first family, some stuff might seem odd but strangely it works, next version will probably tone down on the parameters a bit.
Notice: Everything under constraints is calculated and should be left alone.
standard sizes based upon measurements from the netherlands, but can be adjusted to match your own.
Need another Revit version? Sadly Revit doesn't support saving back to previous versions. I can, however, create an IFC which can be imported. This might break the information contained within. Rendering the model useless. I'm sorry for this. |
No Rating |
Product Version: Revit Architecture 2016
3162 Downloads
|
|
|
|
Site Stats
Members: | 2161655 | Objects: | 23325 | Forum Posts: | 152479 | Job Listings: | 3 |
|
Search