Series CO-200-RFC7 epoxy coated cast iron floor cleanout with 7 in. (178mm) round adjustable nickel bronze top with surface membrane clamp, removable gas tight gasketed brass cleanout plug and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

141 Downloads

Posi-Joist parametric, standard PS10 251x96x46mm

posi-strutt, floor truss, easijoist, posijoist, mittal, wolf system, metal web joists, floor joists, joist, wood joist

parametric, minimum length between walls 692 mm

length between 693 and 1292 mm overlapping web

length above 1292mm array divides length by 600mm

overlap over walls parameters 0mm-width of wall

Product Version: Unknown

818 Downloads

Series FS-700 8 in. (203mm) round x 3 in. (76) deep flanged sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub(standard) outlet.

No Rating

Product Version: Revit Structure 2014

157 Downloads

Series FS-730 12 in (305mm) square x 6 in (152mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

151 Downloads

Series FS-740 12 in. (305mm) square x 8 in. (203mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

167 Downloads

Series FS-760 12 in. (305mm) round x 8 in. (203mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

208 Downloads

CB-624 or CB-2424 Catch Basin for Series Dead Level Pre-Sloped Trench Drain System, 6 in. (152mm) or 24 in. (610mm) (specify) wide x 24 in.(610mm) long x 24 in.(610mm) deep, with UV stabilized talc-filled polypropylene body with 4 in. (102mm) and 6 in. (152mm) no hub outlet connections, and polypropylene (6 in. wide only) or ductile iron frame. Catch Basin shall be frame-anchored, with (specify) grating and lockdowns to suit DIN Class (specify) load rating. Installation to be performed in accordance with manufacturer's recommendations.

No Rating

Product Version: Revit MEP 2014

1177 Downloads

Series FS-770 4 in. x 8 in. (102 x 203mm) rectangular x 4 in. (102mm) deep sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

161 Downloads

Series FS-710 8 in. (203mm) square x 6 in. (152mm) deep sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

105 Downloads

Series FS-750 12 in (305mm) square x 10 in (254mm) deep sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit Structure 2014

87 Downloads

Series FS-850 16 in(406mm) square x 12 in (305mm) deep flanged sanitary floor sink with white acid resistant porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate,aluminum dome bottom strainer, and no hub outlet.

No Rating

Product Version: Revit Structure 2014

77 Downloads

Series FS-720 8 in (203mm) round x 6 in (152mm) deep cast iron sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub (MJ)

No Rating

Product Version: Revit Structure 2014

133 Downloads

MRI Siemens Magnetom Skyra, 3.0 Tesla machine. this machine is static floor based model, i have included the outer 0.05mT 0.5mT & 5mT gauss fields as a perimeter (on/off).

This model is based on information supplied by Siemens, please contact your local rep for further detailed information.

Proudly modelled by SDHB Revit team.

BTW control room and equipment gear not included.

Product Version: Revit Architecture 2012

7666 Downloads

All dimensions and materials are parametric. 

Start/End Angle - allows to specify appropriate sector.

Rin = Radius inner 

Hdesk = Height of the desk surface from the floor

Wdesk = Width of desk surface

Tdesk = Thickness of desktop

Shelf = width of the shelf (from desk edge to show-surface) 

Tleg = Thickness of legs

Tlb = Thickness of legs bottom

Hshow = Height of glass showcase

Hpan = Height of decorative panel

No Rating

Product Version: Revit Architecture 2015

4861 Downloads

Series WCA-411/WCA-411-WC floor mounted concealed arm lavatory carrier with heavy gauge steel uprights with integral welded feet, adjustable epoxy coated cast iron arms with leveling screws and basin locking device, upper tie rod, and plated hardware.

No Rating

Product Version: Revit MEP 2014

58 Downloads

Series WCA-411-D/WCA-411-D-WC back-to-back floor mounted concealed arm lavatory carrier with heavy gauge steel offset uprights with integral welded feet, adjustable epoxy coated cast iron arms with leveling screws and basin locking device, upper tie rod, and plated hardware.

No Rating

Product Version: Revit MEP 2014

23 Downloads

Floor based custom coffee table built out of various sizes of PVC pipe.  I built this in real life years ago and finally built a revit family for it.  Height, as well as table top thickness and radius are parametric.  Both top and base have material parameters.  "pipe base" sizing not parametric since it is quite complicated.  If looking to make table much wider, I'd suggest editing family and scaling each "pipe" set to your desired size.  Enjoy!

Revit 2017

Product Version: Unknown

1366 Downloads

Based from custom manufacturer Two Hills Studio's CB1C Chandelier at its maximum dimensions.

https://twohillsstudio.com/portfolio/chandelier-cb1c/

Face Based Model howver the Ref. Level is at the bottom of the fixture so the bottom of the fixture will be at the floor/ref level of your model. Heights are changed with the  instance paramters for the "bottom of fixture" and "the pendant drop." 

The sub family does not have a photometric parameter for an .IES file

Product Version: Revit Structure 2020

6362 Downloads

A Carrier® fan coil can be a core component of your comfort system. If you could look under the hood, you’d see what drives the performance: a serious commitment to quality. Certain fan coils feature ECM blower motors for optimized airflow, comfort and efficiency. Our Infinity® and Performance™ models step it up with variable-speed air delivery for extra efficiency, quieter operation and even, consistent indoor temperatures. For lasting durability through corrosion protection, the indoor coil includes our high-tech composite base pan with its integrated, sloped drain. The base pan promotes positive drainage to help reduce opportunities for growth of airborne irritants. To ensure maximum reliability and energy-efficient operation, our thermostatic expansion valve (TXV) maintains proper refrigerant flow as pressure and conditions change. Of course, this is the type of excellence you expect when you turn to the experts – Carrier.

No Rating

Product Version: Revit MEP 2018

670 Downloads

Series TCA-411 epoxy coated floor mounted concealed arm track lavatory carrier with heavy gauge steel offset uprights with welded feet, steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

90 Downloads

The Ductile Iron “Y” type strainer shall be in 125 Class and conform to ANSI B16.1, and both the body and access cover shall be made of Ductile Iron A536 65-45 12. The valve shall be supplied with a drain/blow-off connection with a ductile iron closure plug. The integral strainer screen shall be accessible for cleaning without removing the device from the line.

No Rating

Product Version: Unknown

201 Downloads

The Ductile Iron “Y” type strainer shall be in 125 Class and conform to ANSI B16.1, and both the body and access cover shall be made of Ductile Iron A536 65-45 12. The valve shall be supplied with a drain/blow-off connection with a ductile iron closure plug. The integral strainer screen shall be accessible for cleaning without removing the device from the line.

No Rating

Product Version: Unknown

117 Downloads

Generic face-based model of the Minka Aire brand Pancake 52" ceiling fan.  Model number F738-WHF

The family has a parameter to control fan material.  Also a parameter to control offset from ceiling (hanging depth).

The fan is face based, and not ceiling based, as we often model our floors to have our finish ceiling layers, and wanted to be able to attach our fan to the bottom of the floor above if/as needed.

Enjoy!

Product Version: Revit Architecture 2020

8716 Downloads

Series TCA-411-D-WC epoxy coated back-to-back floor mounted concealed arm track lavatory carrier for 27 x 20 lavatories, with heavy gauge H2267steel offset uprights with welded feet, steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

36 Downloads

Rinnai VT26 gas califont,  wall based.

MEP connections for gas supply, cold water IN, hot water OUT, 230 v electrical power supply,  no condensate drain  (optional on this model),  materials for  white spray painted metal case, manufacturer logo, copper tubing.

CBI (NZ)  Liquid  71-26 hot potable water reticulation systems

Has local NZ gas regulations module placement on wall relative to window or doors, dowpipes, balconies, internal corners and ground lines as diagram with Yes/No parameter control -  place the unit on the wall and the unit and diagram appear, move to suit the annotated lines until module in correct  place,  click then select Properties and turn off the 2D diagram,  leaving the module alone on the wall.

Modeled from local NZ Rinnai web site  literature.

Revit 2018

Product Version: Unknown

593 Downloads

Series TCA-411-D epoxy coated back-to-back floor mounted concealed arm track lavatory carrier with heavy gauge steel offset uprights with welded feet, double steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

32 Downloads

The Ductile Iron “Y” type strainer shall be in 125 Class and conform to ANSI B16.1, and both the body and access cover shall be made of Ductile Iron A536 65-45 12. The valve shall be supplied with a drain/blow-off connection with a ductile iron closure plug and will have an FDA approved epoxy coating inside and out. The integral strainer screen shall be accessible for cleaning without removing the device from the line.

No Rating

Product Version: Unknown

313 Downloads

Revit 2015 - This is a metric line based kitchen cupboard as a generic model. Reason being, you can join the different segments. If it were casework, the segments can't be joined. It is a quick and easy way to draft in a basic kitchen bench system which will look adequate in sections and floor plans. It is flexible, so it should easily be converted to imperial units if needed. Hope this helps expedite your benchtop cupboard creation. Let me know if you can improve or have improvement ideas. This is the FIXED version of the family which was missing a vital parameter to allow the height to flex. Please ignore prior version. I couldn't see an option to replace the original upload.

Product Version: Revit Architecture 2015

3623 Downloads

AGRV_FURN_WardrobeL_L型衣櫥(instance)

( instance width and depth)

Metric L shape Wardrobe with dimension and dimension Guide

#hangers Can be seem in floor plan

Product Version: Revit Architecture 2018

2140 Downloads

AGRV_FURN_WardrobeU_U型衣櫥(instance)

( instance width and depth)

Metric L shape Wardrobe with dimension and dimension Guide

#hangers Can be seem in floor plan

No Rating

Product Version: Revit Architecture 2018

2025 Downloads