Series 909RPDA Reduced Pressure Detector Assemblies prevent the reverse flow of fire protection system substances from being pumped or siphoned into the potable water supply. The 909RPDA incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. It consists of an epoxy-coated cast iron body with stainless steel trim, bronze gate valves, a pressure-differential relief valve, shutoff valves, and bronze ball-type test cocks. Series 909RPDA provides maximum flow at low pressure drop utilizing the "air-in/water-out" design principle for protection during emergency combined backsiphonage and backpressure conditions. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

645 Downloads

BASEBOARD HEATER

High Efficiency Ceramic Infrared Panels

The CeramiCircuit™ Baseboard Heater mounts on a wall near the ground and provides consistent warmth. This heater works well as a replacement for an old convective baseboard heater. With the 527 or 545, you enjoy heat without the hazards generally associated with a non radiant baseboard. No risk of a fire, no forced-air, just reliable heat.

Radiant Electric Heat

Product Website: http://electricheat.com/products/baseboard/

Product Cutsheet: http://electricheat.com//wp-content/uploads/2013/12/Baseboard-Cut-Sheet.pdf

3-Part Specification: http://electricheat.com//wp-content/uploads/2013/12/238330-REH3-part-Specification.pdf

Submittal Sheet: http://electricheat.com//wp-content/uploads/2013/12/REH-Baseboard-Submittal-Sheet-May2012.pdf

Operation Manual Installation Instructions: http://electricheat.com//wp-content/uploads/2013/12/Baseboard-Mounting-Instructions-2011B1.pdf

Product Version: Revit Architecture 2012

2603 Downloads

Download: http://deko.bimobject.com/DEKO-DG-Door 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

Single doors are available in module sizes from 700 x 2100 mm to 1200 x 2100 mm, double doors in size 1800 x 2100 mm. Non standard sizes are available to order.

4 or 6 mm clear toughened glass is used for the glazed sections of Deko DG glazed doors. Where specific fire or sound ratings are requried special glass can be inserted.

In the standard format DEKO Doors can be delivered with approval and certification and sound classifications up to 35 dB.

All doors are prefabricated, which eliminates any need for site finishing after installation. All DEKO Doors have been awarded the Danish Indoor Climate Labelling.

Product Version: Unknown

4593 Downloads

Download: http://bimobject.com/en/supa-doors/product/glass_doors_5-panel 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

All doors are solid stile and rail construction that are all Built To Order, allowing for customization on the fly and are available in any standard heights up to 8’0” tall and 3’6” wide (larger doors available upon request). Stile and rail dimensions may be adjusted without affecting the pricing, including multiple sticking profiles and panel options. Door Thicknesses include 1-3/8", 1-3/4" and 2-1/4". ALL Panel doors may be fire rated in 20 minutes, 45 minutes, 60 minutes, and 90 minutes with concealed closer options. SUPA Doors proudly carry a limited Lifetime Warranty and are STC sound rated to minimize noise (STC 32-45). Doors can qualify toward multiple LEED credits and are manufactured in the USA. Clear, Frosted, and Specialty Glass may be substituted for all panels, and all doors can include prehung wood jambs if desired. Matching stain grade veneer doors available in addition to the standard MDF doors. Please see catalogue for details.

No Rating

Product Version: Unknown

13223 Downloads

The Lynx Tub Chair. A versatile collection including armchairs, sofas, tubs and benches. With modern clean lines, beautiful top stitching detail and eye catching polished metal legs. Supportive curved back aids good posture. With wide supportive arms and a 150mm gap underneath for cleaning purposes. A large selection of fabrics including vinyl to help infection control issues available. Made from fire retardant CMHR foams. With mortise and tenon joints, glued and screwed also features strong metal chromed legs.

Pay us a visit at Knightsbridge Furniture

(Created in Revit 2014)

Product Version: Unknown

19201 Downloads