Fully parametric. Modeled after the Brannen Millwork Euro Frame door, up to the CAD details. Wouldn't go thinner than 6" walls for the frame's sake.

Product Version: Revit Architecture 2011

29660 Downloads

This is the same Door Family as uploaded in 2009 with improvement to cater for walls other than 105mm as originally uploaded.

Product Version: Revit Architecture 2018

3354 Downloads

Door - Basic Curve

Parametric

By Juul

Product Version: Revit Architecture 2009

5205 Downloads

Not parametric but is 6'0" front Door 

you can change materials etc.

Product Version: Unknown

21642 Downloads

An exterior door with plenty of windows and trim

Product Version: Revit Architecture 2009

22279 Downloads

GARDEN NO.1 VILLA ENTRANCE PANEL DOOR

Product Version: Revit Architecture 2012

11216 Downloads

Enjoy this door handle! :)

دستگیر در دو تکه

No Rating

Product Version: Unknown

281 Downloads

This Door is not hosted to a wall. It was desigen to stand on its own. Vertical bars are spaced equaly at ±4" depending on the width. 

Rvt 15

Hope it helps

smh

Product Version: Revit Architecture 2015

12060 Downloads

This Door is not hosted to a wall. It was desigen to stand on its own. Vertical bars are spaced equaly at ±4" depending on the width. 

Rvt 15

Hope it helps

smh

No Rating

Product Version: Unknown

5375 Downloads

Single door and Side light - inward opening

Product Version: Revit Architecture 2014

13060 Downloads

Parametric for a single car door.

No Rating

Product Version: Unknown

3244 Downloads

Can't seem to update the Revit file here, so I uploaded another one with both single AND double door versions.

Stanley Dura Glide 2000 single or bi-parting sliding door with "o" panels.  Sizes are based on the sample package widths from the Stanley Access Technologies catalog.

No Rating

Product Version: Revit Architecture 2013

4130 Downloads

This door has elevation and plan swing lines for both ways.  The swing lines are set to only be visible in coarse and medium settings.  Material parameters set for the panel, both kick plates, and the door frame.  Made form Eliasons specs and documents.  Please rate and comment.

Product Version: Revit Architecture 2010

3969 Downloads

Fully Parametric Garage Door

Product Version: Unknown

39795 Downloads

This is a generic door family provided by www.Revitopia.com. It utilizes embedded families to allow concentrated design on the pieces that make up a door with minimal breaking. Its a result of door development for the designer/architects use.

Product Version: Unknown

1179 Downloads

Rectangular resizeable cabinet with awining glass door. Door can be opened, closed or parcially opened. You can change cabinet and glass thickness.

No Rating

Product Version: Unknown

4401 Downloads

Parametric material and length.  Commericial metal door pull with eased edge perpindicular handle profile

REVIT 2017

No Rating

Product Version: Unknown

5381 Downloads

Its a fully parametric wooden door with 6 panels , Frame , 3 hinges and handle at both interior and exterior .

It has Instant opening parameter , so it can be opened upto any angle .

Product Version: Revit Architecture 2019

1145 Downloads

Gate Garage Door. Fully parametric. Door and side panels are controlled separately. (Side panels can be turned off individually if they are not needed. There are a lot of math calculation in this family so when changing sizes it is a little slow. 

Rvt 15

Hope it helps,

smh

Product Version: Revit Architecture 2015

11128 Downloads

Improved parametric hollow metal doors from my post dated August 31, 2011.You can open the "Door Schedule View", switching "Door Type" from #1 thru #4, and watching the door panel changes on 3 D view.You can also check/unckeck "Exterior Door", to swith the "(5) GLASS" from "SG" - safety glass, to "SGI" - safety glass-insulated.If you like it, you can download the door families in  the drawing mentioned above as bases, adding parameters shown here, and creat your own set of parametric door families. Enjoy!

Product Version: Revit Architecture 2009

11335 Downloads

A fully parametric door with many family types already made.  Has two windows & two panels.  Also has a frame that goes around the inside of the opening.

Product Version: Revit Architecture 2011

16652 Downloads

Stile and rail door with parametric dimensions and materials.

No Rating

Product Version: Revit Architecture 2016

1225 Downloads

Here is a door that you can set the angle that you want so it will be open in a walkthrough

Product Version: Unknown

2746 Downloads

Generic floor mounted door stop

No Rating

Product Version: Unknown

2719 Downloads

Single flush type door

No Rating

Product Version: Unknown

679 Downloads

This double door is fully parametric.

Product Version: Revit Architecture 2014

32346 Downloads

Overhead Door adjustable for width.

No Rating

Product Version: Unknown

13077 Downloads

Front door made at NOHS.

Product Version: Unknown

13474 Downloads

Sliding door to fit in Curtain Wall.  Based on Curtain Wall Panel Door by dylan88.

Product Version: Revit Architecture 2008

24245 Downloads

Carriage house door based on a photograph of a RealCraft carriage house garage door. Width and height are parametric.

No Rating

Product Version: Revit Architecture 2020

1299 Downloads