Door made by Jackson Correll. double, hardwood, hard wood, elegant, spanish. 

Product Version: Revit Structure 2016

19002 Downloads

Central de alarme de incêndio endereçável. Baseada no modelo CIE 2500 da Intelbras.

Product Version: Revit Architecture 2017

2333 Downloads

Finally, not my grandma's style door.

Product Version: Unknown

40464 Downloads

Fully Parametric Flush Door family with Swing panel. Panel can be Swing in any angle and it will give a real open door look in Rendering

Product Version: Unknown

10141 Downloads

Here is a parametric door family in CMU wall with customized door schedule to match our office one.This one can show unequal leafs, different swing angles, lites, glass type on schedule; frame depth and frame setback are all parametric.1. The leaf sizes is "Type" dependant, a pair of 3'-0"/2'-0" x 7'-0", will be shown PR. 3'-0"/2'-0"x7'-0" on schedule. -if you need a pair of 3'-0"/1'-4" x 7'-0" door, you can duplicate 3'-0"/2'-0" x 7'-0", go to "Element Property" cahnge the "Width2" to 1'-4" and rename it accordingly, it will show on schedule.2. The swing angle is an "instance", you can click the door #11, go to "Element Property" change "Swing angle" to 50, it will be changed on plan.3. The lite in active panel has three configurations, and a flush one. -go to door schedule view, under "Door Type" not "(2) DOOR TYPE", for Door # 12, if you change the number to 3, then go to 3D view, you can see the lite changed.4. Type of glass is an "instance", you can un-check the box "Exterior Door" on Door Schedule, the "(5)GLASS" will be changed from SGI to SG. SGI- safety glass insulated, SG-safety glass.5. Frame depth and setback (for masonry wall) are all "Family dependant", since I think that each project should have the same setback, if you want, you can modify  it and make it a "Type" or "Instance" parameter.Then you can go to Sheet A101 to see the print format of the door schedule.

Merry X'mas and happy New Year for all.

Product Version: Revit Architecture 2009

4922 Downloads

Here is a parametric door family in CMU wall with customized door schedule to match our office one.This one can show unequal leafs, different swing angles, lites, glass type on schedule; frame depth and frame setback are all parametric.1. The leaf sizes is "Type" dependant, a pair of 3'-0"/2'-0" x 7'-0", will be shown PR. 3'-0"/2'-0"x7'-0" on schedule. -if you need a pair of 3'-0"/1'-4" x 7'-0" door, you can duplicate 3'-0"/2'-0" x 7'-0", go to "Element Property" cahnge the "Width2" to 1'-4" and rename it accordingly, it will show on schedule.2. The swing angle is an "instance", you can click the door #11, go to "Element Property" change "Swing angle" to 50, it will be changed on plan.3. The lite in active panel has three configurations, and a flush one. -go to door schedule view, under "Door Type" not "(2) DOOR TYPE", for Door # 12, if you change the number to 3, then go to 3D view, you can see the lite changed.4. Type of glass is an "instance", you can un-check the box "Exterior Door" on Door Schedule, the "(5)GLASS" will be changed from SGI to SG. SGI- safety glass insulated, SG-safety glass.5. Frame depth and setback (for masonry wall) are all "Family dependant", since I think that each project should have the same setback, if you want, you can modify  it and make it a "Type" or "Instance" parameter.Then you can go to Sheet A101 to see the print format of the door schedule.

Merry X'mas and happy New Year for all.

Product Version: Revit Architecture 2009

5164 Downloads

I fixed the earlier upload that I made so the door handle is on the correct side now and the location of it is also parametric now.  Enjoy! :)

Product Version: Unknown

1557 Downloads

Fully Adjustable  Door material can be changed in materials.

No Rating

Product Version: Revit Building 9

2766 Downloads

This casework family is a model of American Woodmark's one door, one drawer, plastic bag door storage unit base cabinet.  All the components operate independently.  The plastic bag storage unit is a linked family tied to a parameter in the host family.  The two widths offered by American Woodmark, 15" and 18", are included as family types.  A half depth shelf hides inside the cabinet.

Product Version: Revit Architecture 2012

5755 Downloads

Here is a double version of my single door with awning window. The trim is parmetric inside and out, the widnow height is parmetric. I fixed some of the issues that I had with the single door in this Family. However if you can improve on the family feel free to do so.

Product Version: Unknown

10970 Downloads

Adaptation of the single flush door family, but with a knob.  Knob scales with door thickness and width.  Knob does not display in plan. Good for adding interest to 3D views and walkthroughs while not sacrificing clean floorplans.

No Rating

Product Version: Revit Architecture 2011

3982 Downloads

A Fully parametric door with changeble panels, architraves, Frames, Sill materials and much more would highly appreciate feedback and improvement

No Rating

Product Version: Revit Architecture 2013

2814 Downloads

door made at nohs

Product Version: Unknown

2874 Downloads

door made at nohs

Product Version: Revit Architecture 2013

10013 Downloads

door made at nohs

No Rating

Product Version: Revit Architecture 2013

2824 Downloads

door made at nohs

No Rating

Product Version: Revit Architecture 2013

1797 Downloads

door made at nohs

No Rating

Product Version: Revit Architecture 2013

1554 Downloads

door made at nohs

No Rating

Product Version: Revit Architecture 2013

1553 Downloads

door made at nohs

No Rating

Product Version: Revit Architecture 2013

2673 Downloads

Door for a barn stall

Product Version: Revit Architecture 2009

12451 Downloads

This was my first made door in revit ;)

Product Version: Unknown

9200 Downloads

Double Barn door with exposed rail and sliders - most things are parametric and I think I've tested it thoroughly - swap out the door panel to your own if you prefer - has the ability to turn on and off centre crash rail and braces as instance parameters.  Steel single rectangular rail on spacers off the wall, runners connected to stiles.

Product Version: Revit Architecture 2016

8637 Downloads

This is a repair of another family i downloaded from revitcity. I fixed an issue with the door slab not locating correctly in section and 3d. 

No Rating

Product Version: Revit Architecture 2010

571 Downloads

The parametric door contains embedded threshold along with standard ironmongery required in a ELV Room, Telecom Room and Electrical Room door.

No Rating

Product Version: Revit Architecture 2014

4770 Downloads

A simple door tag displaying Door Type Mark, rough height and width. Can be mirrored by changing type.

No Rating

Product Version: Unknown

2559 Downloads

Barn Door 144 wide x 80 tall opening dbl wood door both sides

No Rating

Product Version: Unknown

2751 Downloads

Barn Door 144 wide x 80 tall opening dbl wood door both sides

No Rating

Product Version: Unknown

1472 Downloads

Exterior Entrance Pair doors with pair side lights. 3 levels of detail, Detail level FINE show packers and jambs, heads and sill. Door panel material are changeable. Door created by nested families

Product Version: Unknown

11916 Downloads

This window was used in a wall with brick veneer and is not adjustable.  There is an area of window left out to allow for a dbl door to be inserted.  This will allow for the window and door to be tagged seperately.

Product Version: Revit Architecture 2011

17481 Downloads

Fully parametric door with aluminum strips, casing and frame in aluminum.  Door is EBE Porte Linea 01 available in the US at www.rest-agio.com.  Visit the site for full line catalog as well as other luxury finishes from Italy.

Done in Revit 2013

Product Version: Revit Architecture 2012

22024 Downloads