Series LFLL40XL, LFLLL40XL Extended Shank Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature an extended shank for installation on water heaters with extra thick insulation as well as a Lead Free* cast copper silicon alloy with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model LFLL40XL is available in sizes 3/4 and 1 in. (20 and 25mm). Model LFLLL40XL is available in size 3/4 (20mm) with an extra long extended shank. Series LFLL40L, LFLLL40XL valves are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

89 Downloads

spider Crane with parametric Boom Extension. I did not have time to model the hook cable and may need to add few parameters depending on your needs. I have decide to create one as I have not seen a parametric spider crane quiet as good as this. Hopefully it will help create better for future needs. Enjoy! by Vision Artititech

Product Version: Unknown

1652 Downloads

This is a front-loading washer and dryer set based on a standard 27" wide LG model.  There's an option to turn the washer and dryer on and off separately, and also to turn pedestals on for both units.  Reference lines provide the manufacturer's suggested clearances.

Product Version: Revit Architecture 2013

24625 Downloads

model pattern - Checked Steel Plate

Product Version: Unknown

6864 Downloads

model pattern - Diamond Tread Plate

Product Version: Unknown

5737 Downloads

model pattern - clay roof tiles

Product Version: Unknown

40857 Downloads

model pattern - garden wall brick

Product Version: Unknown

10008 Downloads

model pattern - flemish cross brick

Product Version: Unknown

3977 Downloads

model pattern - grouted cut stones

Product Version: Unknown

4305 Downloads

model pattern - mediterranean brick pavers

Product Version: Unknown

7813 Downloads

model pattern - melbury house parquetry

No Rating

Product Version: Unknown

4023 Downloads

Dental Xray Unit - non hosted model.

No Rating

Product Version: Revit Architecture 2014

3580 Downloads

Grohe "Allure" Faucet, model #19300.  Developed from 2D CAD drawings so geometry is approximate.  Wall based.

Product Version: Revit Architecture 2008

8590 Downloads

drafting pattern - Southern Ledgestone with Dressed Field blend
Origonaly from cultured stone, this pattern dident work in Model mode. i fixed it.

Product Version: Unknown

9095 Downloads

Right guys and girls..... my latest model and this one aint that bad!!

A nice Cooking pan Set based on the Prestige set. Included is a Low Sauce pan, High Sauce pan and Frying pan.

I've modelled 2 of them seperate and loaded them into one.

Looks the biz in a kitchen render!!

Hope they come in useful for you.

Enjoy

Product Version: Revit MEP 2014

17638 Downloads

Up Folding basketball hoop .  Fully Parametric. It inserts itself at 10 feet above the ground, you can adjust how far out from the wall it extends and it automatically adjusts itself (including cross bracing).  The height of the crank box on the wall is also independently controllable.

  Based on the Draper DUW Model.

Product Version: Revit Architecture 2011

8959 Downloads

We recently redid our kitchen and to save space, we designed a Julia Child Pegboard Pot Wall. The pegboard was challenging to do in Revit but moreso, it was quite dfficult to model pots and pans of various scales and make them appear to be hanging on the wall. Enjoy!

No Rating

Product Version: Revit Architecture 2017

3255 Downloads

Simple model of a mobile folding convertible bench similar to Virco Manufacturing

Product Version: Revit Architecture 2009

989 Downloads

David Statue by Michelangelo - Materials are listed under David Statue for easy changing to any material or color you would like.  Simply open the file and scale the model to any desired size you would like from yard art to book shelf size.

Comments Suggestions?

Product Version: Unknown

28469 Downloads

I've been doing a bunch of coffee house designs for a franchise and I came up with this very simple family to quickly make all the equipment I needed with modeling anything. You can supply Manufacturer, Model, Amps, Voltage, Width, Depth and comments.

Duplicate and specify the information for each piece of equipment and place where you need it. Can schedule and everything!

Also has a Kitchen Equipment Object Style set up so you can easily turn them off if needed.

Product Version: Unknown

11362 Downloads

It is a model pattern of vertical bricks (2.5") and joints of mortar (0.5"), if you need different dimension or the other joints in the perpendicular direction i can edit it. let me know.

No Rating

Product Version: Unknown

1769 Downloads

Buddha - Statue, Sculpture, Artwork.  Call it what you will.   This model stands about 12"-18" tall but can be scaled to any size a person wants.  The Material is listed under BUDDHA - 1 for those wanting to change its color or appearance.

FILE TYPE: Revit 2012 64bit

Product Version: Revit Architecture 2012

15424 Downloads

8' Metal Park Bench based on 'Cassidy' Arched Back Bench from Barco Products.

Model is not currently parametric, though I plan to update it eventually.  Also note that the length is only 91.5" based on the actual product, but is listed as the 8' class bench.

Product Version: Revit Architecture 2014

19155 Downloads

Filtrine Model ES-2-RF-IW - Remote in-wall chiller/purifier for serving chilled/purified water to (1) or (2) dispensers within 10-15'. (2) Gal. storage tank. Serves a population of (100), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

692 Downloads

My recreation of the UTU Helio II chandelier.

Material can be set for body 1, body 2, globes, finial, cord, and canopy.

Please rate and comment!  Thanks.

Product Version: Revit Architecture 2017

874 Downloads

model pattern - Board & Batten 1x4 @ 20" oc

Product Version: Unknown

0 Downloads

model pattern - Board & Batten 1x4 @ 20" oc

Product Version: Unknown

0 Downloads

model pattern - just roof pattern

Product Version: Unknown

8724 Downloads

A Face based family of water closet based on Nexo model of ROCA, inclusive of Parameter for Health faucet, SAP codes, Ablution tap. WIP to add MEP Connections invite comments to improve the same

Product Version: Revit Structure 2013

9051 Downloads

My best recreation of the 608C Arm Chair from Old Hickory Furniture.  Non-para.

Made it for my wife who's an interior design student.  Hopefully it helps some other people out there.

No Rating

Product Version: Revit Architecture 2017

587 Downloads