Parametric. You can change the number of shelves and the height of the bottom and top shelf. You can also change how far apart the two wall supports are and how far down they extend. You cannot change the width or depth. The array will glitch.

REVIT 2016 (not 2015)

Note: the elevation constraint measures to the bottom of the supports, not the shelf. Make sure the two elevation constraints are the same.

Hey, I'm really sorry but I forgot to align the top shelf with the top reference plane. Open the family in "back side" view, push AL (or the align button.) click on the top reference plane, then click on the top of the top shelf. That will fix it.

No Rating

Product Version: Unknown

1632 Downloads

Mono pitch truss with variable elements:  top chord width, bottom chord width, top chord pitch, eave overhang, web width, end vertical width, throat depth, and elevation of seat

Product Version: Revit Structure 2008

5276 Downloads

This door has elevation and plan swing lines for both ways.  The swing lines are set to only be visible in coarse and medium settings.  Material parameters set for the panel, both kick plates, and the door frame.  Made form Eliasons specs and documents.  Please rate and comment.

Product Version: Revit Architecture 2010

3927 Downloads

Wall based shelf ^parametric

Hidden Instance parameter displays shelf in plan as dashed lines

Shelves Instance paramter displays shlef in elevation as dashed lines even when it is behind another object as long as the invisible line passes the object in front

Shelf can be offset from wall

No Rating

Product Version: Revit Architecture 2015

5947 Downloads

The number and size of windows, height, width and thickness of the door are all controlled by parameters.  In addition, the min and max panel (section) height is controlled by parameters as is the approximate window elevation – I say approximate because I set it up to put the window as close to the specified height as is possible based on the height of each panel.

No Rating

Product Version: Unknown

1931 Downloads

Parametric. You can change the number of shelves and the height of the bottom and top shelf. You can also change how far apart the two wall supports are.

you cannot change the width or depth. The array will glitch.

REVIT 2016 (not 2015)

Note: the elevation constraint measures to the bottom of the supports, not the shelf. Make sure the two elevation constraints are the same.

Hey, I'm really sorry but I forgot to align the top shelf with the top reference plane. Open the family in "back side" view, push AL (or the align button.) click on the top reference plane, then click on the top of the top shelf. That will fix it. 

No Rating

Product Version: Unknown

921 Downloads

Parametric. You can change the number of shelves and the height of the bottom and top shelf. You can also change how far apart the two wall supports are. 

you cannot change the width or depth. The array will glitch.

REVIT 2016 (not 2015)

Note: the elevation constraint measures to the bottom of the supports, not the shelf. Make sure the two elevation constraints are the same.

Hey, I'm really sorry but I forgot to align the top shelf with the top reference plane. Open the family in "back side" view, push AL (or the align button.) click on the top reference plane, then click on the top of the top shelf. That will fix it.

No Rating

Product Version: Unknown

1013 Downloads

The number and size of windows, height, width and thickness of the door are all controlled by parameters.  In addition, the min and max panel (section) height is controlled by parameters as is the approximate window elevation – I say approximate because I set it up to put the window as close to the specified height as is possible based on the height of each panel.

No Rating

Product Version: Revit Architecture 2013

1539 Downloads

Standard annotation break line that can be used at detail scale or elevation etc scale to show a break line and blank off the whats behind the break line.

http://www.vtourinteractive.com/blog 

Product Version: Revit Architecture 2009

4418 Downloads

XXL sized flag.

Customizable, so you can put whatever flag you want--here's how:

1. Save the image you want to use your flag as.

2. Go to the insert tab

3. Click "decal"

4. Create a new decal, using your saved image

5. Go to a section or elevation view where the flag is visible

6. "insert" "decal" and then place the decal.

7. Repeat steps 5-6 to put image on the other side of flag

Now your flag will be visible from all views, including rendering 3D. If 80 feet is too tall for your flag, edit the family.

No Rating

Product Version: Revit Architecture 2014

5117 Downloads

Insert as a DOOR!!

This is an expasion joint from wall to wall, mostly to be used with gypsum board walls.

The gap is 8". The plan represensation will show the joint gasket details. The elevation will show the trim and middle metal, as well as the 2 side expansion gadgets.

Both metal and expansion gadgets allow material selection.

This joint system is similar to InPro 233-A07 wall to wall expansion joint

Product Version: Revit Architecture 2015

1760 Downloads

Revit 2021 Family - cannot be down saved.

This family is based off of a modular package and parcel delivery locker. I couldn't find a family for the amazon hub delivery lockers or a parcel pending delivery locker, so I made my onw. Pretty basic family, but it gets the job done to describe the scale and rough front elevation of the system. 

I modeled this after the indoor amazon hub delivery locker. Main base is 6' - 0" W x 1' - 10" D x 6' - 8" H. Additional 3' - 0" W modules are instance parameters for whatever configuration is desired. Materials are also parametric.

No Rating

Product Version: Unknown

857 Downloads

Double panel wall sliding door where you can adjust height, width, %swing, frame width & projection, panel foot & depth, elevation swing symbol visibility, rail height, panel material, frame material and rail material.

No Rating

Product Version: Revit Architecture 2008

5830 Downloads

This window family has type parameters to drive shim space, frame, mullion, & sash width & depth, glazing unit thickness and materials. Also, wall sheathing location can be set by instance for different wall assemblies, the flange setback will control how far in front of the sheathing the window will project. Lites & transom can be toggled on or off. Also, this family features nested families for picture, casement, awning, gliding, & single hung operation with proper representation in elevation for window, lites, and transoms. This should accommodate a wide variety of window configurations in a single family. 

Product Version: Revit Architecture 2015

9077 Downloads

This specialty equipment family is a Waste King Legend 8000 in sink disposal.  It was modeled using a Waste King drawing and is replete with a drain connection.  After placing it in plan view, go to an elevation and align the collar to the bottom of your sink.  The pre-defined materials are assigned using specialty equipment sub-categories.  The URL takes you to the Waste King product page for the Legend 8000.  The price as of 2/7/12 is recorded in the cost parameter.  The current price will be shown on the web page.

No Rating

Product Version: Revit Architecture 2012

3076 Downloads

Metal frame doors - detailed frames with stops.  Standard 5 3/4" frame with adjustable frame depth.  Can adjust setback from wall face - default 1/8".  Rough openings will include frame width.  Has lockset in elevation & 3D views.  Door sizes 2'6", 2'8", 2'10", 3'0", & 4'0" x 7'0" - can add or adjust sizes.  Default frame width 2", frame head 4" - can adjust sizes.

No Rating

Product Version: Revit Architecture 2010

1490 Downloads

Reloaded the earlier door Project after minor rectification.

One Nested Door having 2 Frames & 2 Leaves Make more than 100 Types. Multy lite varies 1Vx1H to 10Vx4H & Lites can be Glass or solid, 2ndry Frame width can be zero. Vent Ht can be zero for door without Vent. Flush door can be panel door by inputing Mould depth. Single Rebate Wooden door frame can be change to double Rebate. Door handle Type can also be change with their elevation.  Hollow Metal door frame is double rebate only. Material of different parts of door can be differentOperable 2D swing represent corresponding Leaf type. 3D swing is also operable, Grill Y/N in Vent  --Lallan Ji

Product Version: Revit Architecture 2013

17931 Downloads

This family is a simple parameter-controlled solid surface vanity (based on Swanstone dimensions).  

Family includes both surface-mounted and wall-mounted faucents, which can be toggled on/off with Type Parameters.  Faucet uses Symmons faucets, which can be switched out by editing the family if needed.

Vanity dimensions, backsplashes, faucets, meterials and basin offset can all be controlled with parameters.  

Family does not include casework below.

Simple Look in plan/elevation works for a lot of our uses-- hopefully it'll help you too!

Thanks

Keywords: Counter, Sink, Faucet, Solid Surface, Vanity, Bathroom

No Rating

Product Version: Revit Architecture 2020

3175 Downloads

McKeon top coiling fire door with egress pocket door.  The egress door is located in a pocket in the wall and when the system activates, it swings into position and the coiling door drops from above.  This family includes all elements as well as a 'closed' and 'open' position.  It is hosted on a face of a wall, more specifically the back of the pocket where the egress door is in.  Ceiling height and width are instance controlled parameters allowing you to set them specifically for each import.  It includes 2d linework details (copies from McKeon) for both side tracks in plan view and then the coiling mechanism above the ceiling in elevation and section views.

Product Version: Revit Architecture 2011

3067 Downloads

Large chandellier light family based on the Sonneman brand 'Constellation Hedron' light fixture.

Based on the Sonneman spec, the geodesic dome form measures 45" in diameter with 40 LED bulbs.  

Modeled as a Generic Family.  Not face-based or ceiling hosted-- you'll need to set the elevation within your model.

The model DOES include lighting which will illuminate space in rendering programs.  The lighting does not utilize the actual IES files-- and is an estimated look using generic Revit lighting fixtures in the estimated locations of the light fixture lighting.

The handing distance is unfortunately not parametric at this time-- I haven't had time to adjust this value.  Feel free to make your own updates and share.  

For more on the Sonneman fixture, visit https://sonnemanlight.com/constellation-hedron-chandelier

No Rating

Product Version: Unknown

2474 Downloads

Our Madison range comes with a high back and upholstered arms to ensure maximum comfort. Showwood feet available in Bleached Beech, Cherry, Natural Beech, Oak, Walnut and Wenge stains as standard, plus customers own stains.

Reversible cushions ensure even wear and prolong fabric life.Polished Timber Feet (Front) plus Castors (Rear) to aid manoeuvrability.The Extreme version is the same domestic looking settee with high back and elegantly curved arms to ensure maximum comfort yet constructed to benefit from all the safety features required for challenging environments. It is ergonomically designed to guarantee good posture. It has a reinforced frame with plywood skinning and plywood under bottom to add extra weight.Anti-tamper security fixings such as no visible staples and use of non-retractable screws.Metal back tacking has been removed - slip stitching where requiredExtreme feet fitted with non-retractable bolts and removable cushions for easy cleaning.Reversible cushions prolong the life of the upholsteryZipper tag over sewn.

(Created in Revit 2014)

Product Version: Unknown

10138 Downloads

This updated version includes additional control parameters. Also family can be easily converted into a "Fake elevation marker".

This is a modified fake section marker provided by www.Revitopia.com. As a 2 click operation, it utilizes line based detail component and embedded annotation objects. There are 3 primary parameters; Sheet(where you put the sheet number), Detail(where you put the detail number), and Head angle(to rotate the bubble). This was a solution to the use of AutoCAD Details being on a Revit project and to avoid creating “fake” detail views for placing on sheets.

Product Version: Revit Architecture 2014

2786 Downloads

HJacobs excellent  shelf - metric version

This is a parametric wall mounted shelving unit for use with adjustable shelving on brackets. Its subcategory comes with a default dashed linetype so it shows up dashed in plan and elevation.

http://www.vtourinteractive.com/blog 

Product Version: Revit Architecture 2010

3911 Downloads

This is the finished Facility Occupancy Load Schedule and Egress Plan. This is automated to calculate the occupant load based on the type of area then use that to calculate occupant load.

There are 2 tags. 1 for rooms, 1 for egress doors.

There are 4 schedules

1.      DOOR EGRESS SCHEDULE

2.      FACILITY OCCUPANCY SCHEDULE

3.      ROOM OCCUPANCY COMPARE SCHEDULE

4.      SPACE OCCUPANCY CLASSIFICATION

There is one sample Model.

Steps:

1.      Copy the schedules and tags to your current project.

2.      Open the Room occupancy compare schedule

3.      Select what type of area you see fit.

4.      Type in 0 sf for “NON CALCULATED ROOM AREA” to calculate occupants

5.      Manually type in tag value to match calculation to populate the room tag.

6.      Place the facility schedule on the code plan sheet.

7.      Place the Door egress schedule on the sheet too.

8.      Place all your room tags

9.      Place your egress door tags on 1 exit way door only per egress area

10.   Make a note of how you want to number your egress areas. ( I usually go clockwise from upper left to lower right)

11.   Fill in the Egress area for each room in the properties field. ( You can multiple select rooms at the same time and type in the value for all at once, use your filter)

12.   The Facility Schedule will populate.

13.   Type in the Occupant value to the Door egress schedule. Make sure they match. Hide Door egress schedule.

You’re done. Or pretty close J #JustinDesigns3D JustinDesigns3D@Gmail.com

Product Version: Unknown

3978 Downloads

Cast an artistic, scalable graphic symbol on your plans with real-time shadows that adjust to your solar study. And when viewed in elevation, just wow!! A true picture of the fluid and ever-dynamic real-life environment on your designs.

Explore more of these free families at https://dartfamilies.com/

Product Version: Revit Architecture 2020

2309 Downloads