I took the component below and made it parametric...

Product Version: Revit Architecture 2009

Uploaded By: JLinkUploaded On: Wed, Nov 4, 2009

No Rating

Product Version: Revit Architecture 2016

5472 Downloads

Series FD-100-EG epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary & secondary weepholes, adjustable heel proof nickel bronze strainer with 4 in.(102mm) x 9 in.(229mm) oval nickel bronze funnel, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

78 Downloads

Series FD-230-A epoxy coated cast iron floor drain/cleanout combination with anchor flange, integral trap, membrane clamp with weepholes, adjustable round heel proof nickel bronze strainer & cleanout top, removable plug, and no hub outlet.

No Rating

Product Version: Revit MEP 2014

427 Downloads

Series Dead Level BK Pre-Sloped Trench Drain System with 6(152) wide x 48(1219) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4(102) No Hub bottom outlet(s). System shall be frame-anchored, with BK grating. System to include frame connectors, grate lock-downs, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

179 Downloads

Series Dead Level S Deck Channel system with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4" IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and recommendations.

No Rating

Product Version: Revit MEP 2014

225 Downloads

Series Dead Level D Pre-Sloped Trench Drain System with 6 in.(152mm) wide x 48 in.(1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4(102) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

465 Downloads

Series Dead Level DX Pre-Sloped Trench Drain System with 12 in.(305mm) wide x 48 in.(1219mm) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with 6 in.(152mm) No Hub Bottom or End outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

268 Downloads

Series TD-300 Elevator Channel Drain with 11-3/4 (298) wide x (specify) long 12 ga. type 304 stainless steel body, heel proof and ADA compliant load class B stainless steel grating with grate open area of 65 sq. in. per foot is secured with vandal-proof stainless steel screws, and 4 (110) no hub center outlet. Complies with 2013 California Building Code 403.6.1, 403.6.2, 3007.4, 3008.4, and SFFC Section 511.1.4 for a flow rate of 100 GPM.

No Rating

Product Version: Revit MEP 2014

487 Downloads

Series Dead Level Z Parking Deck Channel System with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame with integral deck flange, UV stabilized talc-filled polypropylene channels with integral 4 in IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. System can be specified in 1 in (305mm) increments. Installation to be performed in accordance with manufacturer's recommendations.

No Rating

Product Version: Revit MEP 2014

256 Downloads

Series Dead Level P Pre-Sloped Trench Drain System with 6 in.(152mm) wide x 48 in.(1219mm) long (standard) UV stabilized glass-filled polypropylene frame, UV stabilized talc-filled polypropylene channels with integral 4 in.(102mm) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code.

No Rating

Product Version: Revit MEP 2014

223 Downloads

CB-624 or CB-2424 Catch Basin for Series Dead Level Pre-Sloped Trench Drain System, 6 in. (152mm) or 24 in. (610mm) (specify) wide x 24 in.(610mm) long x 24 in.(610mm) deep, with UV stabilized talc-filled polypropylene body with 4 in. (102mm) and 6 in. (152mm) no hub outlet connections, and polypropylene (6 in. wide only) or ductile iron frame. Catch Basin shall be frame-anchored, with (specify) grating and lockdowns to suit DIN Class (specify) load rating. Installation to be performed in accordance with manufacturer's recommendations.

No Rating

Product Version: Revit MEP 2014

1170 Downloads

Watts Dead Level Z Parking Deck Channel System with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame with integral deck flange, UV stabilized talc-filled polypropylene channels with integral 4 in IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. System can be specified in 1 in (305mm) increments. Installation to be performed in accordance with manufacturer's recommendations.

Product Version: Revit MEP 2014

806 Downloads

Series LF7R Lead-free* Dual Check Valves prevent the reverse flow of liquids in a plumbing system from entering the drinking water supply where there is a non-health hazard. Designed for residential water system containment at the service entrance or individual outlets. They can be installed immediately downstream of the residential meter in a horizontal or vertical position. Replaceable compact plastic check modules. Available in a combination of inlet/outlet sizes and types, and thread and end connections.

No Rating

Product Version: Revit MEP 2014

103 Downloads

Series LFN9, LFN9C Lead Free* Dual Check Vacuum Breakers prevent the reverse flow of polluted water from entering into the potable water supply. They have a Lead Free* brass body construction with an atmospheric vent, and NPT female inlet and outlet connections. Series LFN9 and LFN9C are designed for non-health hazard, continuous pressure applications. Series LFN9C comes with chrome plated finish. Maximum Working Pressure: 125psi (8.6 bar)

No Rating

Product Version: Revit MEP 2014

78 Downloads

Series LF127W High Capacity Water Pressure Reducing Valves are used in commercial and industrial applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. They have a Lead Free* bronze body construction with NPT threaded inlet and outlet connections, replaceable stainless steel seat, and high temperature resisting interchangeable diaphragm chamber. Maximum Working Pressure: 175psi (12.1 bar), Adjustable Reduced Pressure Range: 25 to 100psi (1.7 to 7 bar).

No Rating

Product Version: Revit MEP 2014

189 Downloads

Series LF127W High Capacity Water Pressure Reducing Valves are used in commercial and industrial applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. They have a Lead Free* bronze body construction with NPT threaded inlet and outlet connections, replaceable stainless steel seat, and high temperature resisting interchangeable diaphragm chamber. Maximum Working Pressure: 175psi (12.1 bar), Adjustable Reduced Pressure Range: 25 to 100psi (1.7 to 7 bar).

No Rating

Product Version: Revit MEP 2014

117 Downloads

MIFAB Series MI-SOLID-S lacquered cast iron solids interceptor with internal stainless steel perforated sediment bucket removable through top. Interceptor complete with 2” F.I.P. inlet and outlet and gasketed lid secured with single handle.

No Rating

Product Version: Unknown

43 Downloads

MIFAB® BIG-O Series HDPE rotational molded oil interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), internal air relief by-pass, adjustable oil draw-off assembly (1 1/2″) on each side, double vent connections (3″) on each side, sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20

No Rating

Product Version: Revit Architecture 2020

241 Downloads

MIFAB ® Series MI-HAIR lacquered cast iron hair and solids interceptor with internal stainless steel perforated sediment bucket removable from bottom. Interceptor complete with 1 ½” slip joint elbow inlet, 1 ½” F.I.P. side outlet and gasketed cleanout plug.

No Rating

Product Version: Unknown

46 Downloads

MIFAB MI-E-G Series electronic grease interceptor with powder epoxy coated interior and exterior, and 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket removable through the bottom. Interceptor complete with standard no hub inlet and outlet for flow through installation and gasketed lid secured with bolts.

No Rating

Product Version: Unknown

99 Downloads

Series LFFBV-3C-QC 2-Piece, Full Port, Lead Free* cast copper silicon alloy Ball Valves with Quick-Connect Technology are used in residential and commercial potable water applications. They feature a bottom-loaded blowout proof stem, virgin PTFE seats and thrust washer, adjustable packing gland, stem packing nut, chrome-plated brass ball adapter and steel handles. Comes with integral Quick-Connect inlet and outlet connections for fast installation on copper, CPVC, PEX, and PB pipe.

No Rating

Product Version: Revit MEP 2014

630 Downloads

Series LF223, LF223S Lead Free* High Capacity Water Pressure Reducing Valves are used in commercial, industrial, and institutional applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. Available with NPT threaded female inlet and NPT female threaded outlet. Series LF223S comes with a strainer. Standard pressure setting is 50psi with an adjustable range of 25 ‒ 75psi (172 ‒ 517 kPa).

No Rating

Product Version: Revit MEP 2014

234 Downloads

MIFAB Series MI-SOLID-M medium capacity powder epoxy coated interior and exterior 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket and baffle assembly. Interceptor complete with 2” F.I.P. low inlet and 2” F.I.P. high outlet on other side for flow through installation.

No Rating

Product Version: Unknown

76 Downloads

MIFAB® Series MI-NEUT solid construction seamless polyethylene body with inlet and outlet, optional vent connections, acid resistant epoxy coated bolted down neoprene gasketed lid, stainless steel hardware. The tank is filled with neutralization medium, lump limestone 1” to 3” diameter size, water is then added to the tank to help dilution.

Product Version: Unknown

159 Downloads

MIFAB® Series F1560 extra heavy duty lacquered area drain with side outlet body, internal deep seal trap and cleanout, seepage pan, standard 1” (25) thick, 12” (305) square heavy (specify material finish) hinged grate and suspended sediment bucket.

No Rating

Product Version: Unknown

259 Downloads

MIFAB® Series MI-SOLID-LB small capacity powder epoxy coated interior and exterior 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket removable through the bottom. Interceptor complete with 2” F.I.P. low inlet and 2” F.I.P. high outlet on other side for flow through installation and gasketed bottom lid secured with latches.

No Rating

Product Version: Unknown

26 Downloads

MIFAB® Series MI-SOLID-TA top access powder epoxy coated 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket and gasketed top access lid. Interceptor complete with no hub inlet on one side and no hub outlet on other side for flow through installation.

No Rating

Product Version: Unknown

31 Downloads

Model LF174A Boiler Pressure Relief Valves are Lead Free* cast copper silicon alloy body safety relief valves for pressure protection only of all types of hot water heating boiler equipment. Pressure range is 50 to 150psi (3 - 10 bar) with corresponding high ratings from 2,459,000 to 14,370,000 BTU/hr. Female inlet and outlet connections. Sizes: 3/4in. - 2in. (20 - 50mm). The LF174A features Lead Free* construction to comply with Lead Free* installation requirements. It resists corrosive water conditions, sticking, and freezing, and it prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control.

No Rating

Product Version: Revit MEP 2014

211 Downloads

Model LF10L Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 80,000 BTU/hr. They have a bronze body with NPT threaded male inlet and NPT threaded female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model LF10L is ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

215 Downloads

MIFAB® BIG MAX Series HDPE Rotational Molded Grease Interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, internal air relief by-pass, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20. Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101, CSA B481, A.S.M.E. A112.14.3 and listed with I.A.P.M.O. Big Max grease interceptors are also in compliance with International Plumbing Code (I.P.C.) / I.C.C. by I.A.P.M.O. For indoor/outdoor use.

No Rating

Product Version: Unknown

325 Downloads