YKK Hurricane resistant Storefront Door W/ Frame in Plan and Actual Opening Size

Product Version: Unknown

282 Downloads

cabinet door family

No Rating

Product Version: Unknown

2097 Downloads

I think I've corrected a little problem with the door not adjusting properly with a type change.  This is American Woodmark's 1 door, 1 drawer, 1 roll out tray divider base cabinet.  It comes in two widths:  12" and 15".  The tray has three compartments at the larger size and two at the smaller.

No Rating

Product Version: Revit Architecture 2013

3131 Downloads

Series 757 Double Check Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a non-health hazard. Compact design and lightweight stainless steel construction (70% lighter than traditional designs) makes installation easier and faster. For unmatched versatility, assemblies are available for horizontal, vertical, or N pattern installations while groove connections allow ease of installation and pipe alignment. Patented tri-link check assemblies are also designed for easy serviceability. A variety of shutoff valve options are offered.

No Rating

Product Version: Revit MEP 2014

835 Downloads

Complete parametric Clopay model 520S door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 520S - 2" thick sectional overhead garage door with 20 gauge deep ribbed exterior steel and polystyrene insulation with steel backer. R-value 6.6. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

2586 Downloads

Complete parametric Clopay model 524S door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 524S - 2" thick sectional overhead garage door with 24 gauge deep ribbed exterior steel and polystyrene insulation with steel backer. R-value 6.6. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

1481 Downloads

Complete parametric Clopay model 525S door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 525S - 2" thick sectional overhead garage door with 25 gauge deep ribbed exterior steel and polystyrene insulation with steel backer. R-value 6.6. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

1491 Downloads

Complete parametric Clopay model 525V door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 525V - 2" thick sectional overhead garage door with 25 gauge deep ribbed exterior steel and polystyrene insulation with vinyl backer. R-value 6.6. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

1474 Downloads

Complete parametric Clopay model 524V door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 524V - 2" thick sectional overhead garage door with 24 gauge deep ribbed exterior steel and polystyrene insulation with vinyl backer. R-value 6.6. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

1684 Downloads

Majesta Double Hungs are Kolbe's newest product.All units are custom made-to-order, therefore there are no standard sizes.• Maximum frame size: 6’ x 12’• Minimum frame size: 3’-6” x 6’-5”• Minimum basic jamb size: 6-9/16”• Other size limitations may apply, depending on the options chosen• Sash: nominal 2-1/4” thick• Spiral balance system• Concealed jambliners• Standard locking hardware: innovative pin style lock at the top of the top sash and bottom of the bottom sash; no checkrail locks as standard• Sash are removable, but do not tilt-in• Triple insulating glass available!

No Rating

Product Version: Revit Architecture 2010

958 Downloads

DECORATIVE RESIDENTIAL DOOR WITH SOLDIER COURSE ON 3 SIDES AND KEYSTONE HEAD PIECE

Product Version: Unknown

6728 Downloads

Complete parametric Clopay model 3722 door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 3722 - 2" thick sectional overhead garage door with 20 gauge flush exterior steel and polyurethane insulation with vinyl backer. R-value 17.2. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

1923 Downloads

Complete parametric Clopay model 3718 door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 3718 - 1-3/4" thick sectional overhead garage door with 27 gauge flush exterior steel and polyurethane insulation with vinyl backer. R-value 15.05. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

1378 Downloads

This American Woodmark model is their double oven, 84" high, 2 butt doors, 1 drawer cabinet.   American Woodmark offers this cabinet in two widths: 27" and 30" and those are the two family types.   All doors and the drawer operate independently.   The oven width for each cabinet size is preset to the published size, but I've exposed the oven opening parameters as instance parameters if you want to cut a custom opening.

The best practice for operating the doors is to open and close them in angular increments of something less than 90° in a single operation. For example, if you want to open them to 90°, you could open them initially to 50° and then go to 90°. Close them the same way.

No Rating

Product Version: Revit Architecture 2013

4388 Downloads

Complete parametric Clopay model 3715 door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 3715 - 1-3/8" thick sectional overhead garage door with 27 gauge light ribbed exterior steel and polyurethane insulation with vinyl backer. R-value 12.9. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

1713 Downloads

Complete parametric Clopay model 3717 door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 3717 - 1-3/4" thick sectional overhead garage door with 27 gauge light ribbed exterior steel and polyurethane insulation with vinyl backer. R-value 15.05. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

1505 Downloads

Complete parametric Clopay model 3720 door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 3720 - 2" thick sectional overhead garage door with 27 gauge light ribbed exterior steel and polyurethane insulation with vinyl backer. R-value 17.2. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

2092 Downloads

two medium sized lockers stacked vertically

No Rating

Product Version: Revit Building 5.1

10093 Downloads

Fully parameterized model of the Jeld-Wen Model 1381 Flat Top Door.  Separate file to load sidelights.  Designed this for a project I'm working on.  Still pretty new to modeling; so, if you find any errors or issues please msg me.

Door can be found here:

http://www.jeld-wen.com/catalog/exterior-doors/custom/wood/glass-panel#group=All&model=model72

No Rating

Product Version: Revit Architecture 2015

4117 Downloads

AGRV_Door_GlassSlidingTriple_三落地窗門A

Metric Glass Triple Sliding door (TypeA) with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

758 Downloads

AGRV_Door_GlassSlidingQuadrupleA_四落地窗門A

Metric Glass Quadruple Sliding door (TypeA) with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

1528 Downloads

NOTE:

Browse thru all the various Tags to get the one you want.

Door Tag with Project Unit Dimensions (instead of Symbols) suitable for Residential Contractor Plans. The "45" tags are for Doors in Angled walls. For larger doors (Garage) you can use the "FEET" type tag.

No Rating

Product Version: Unknown

4991 Downloads

A typical hollow metal commercial door in a pressed steel frame. No trim and the frame shows in plan view. The frame depth is an instance parameter to accomadate different wall types.

Product Version: Unknown

7477 Downloads

This is a gate that has corrugated metal sheathing and is meant to be placed in a wall.  Width and height are adjustable in the Type Parameters.  (6', 8', 10', and 12' widths)

Product Version: Revit Architecture 2009

19551 Downloads

AGRV_Door_GlassSlidingTriple_三落地窗門

Metric Glass Triple Sliding door with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

1193 Downloads

AGRV_Door_GlassSlidingTriple_三落地窗門

Metric Glass Triple Sliding door with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

673 Downloads

AGRV_Door_GlassSlidingQuadruple_四落地窗門

Metric Glass Quadruple Sliding door with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

573 Downloads

Wooden arched french styled external glass door  

Product Version: Revit Building 9

13367 Downloads

Fully parametric Louver Panel Folding Door

For LV Room or Electrical Sub-station

Product Version: Revit Architecture 2014

32782 Downloads

Parametric single fire escape door with with selection of ironnmongery including push bar

Product Version: Revit Building 8.1

11541 Downloads