One kitchen cabinet family to make this kitchen. Copy the family side by side and choose from: a sink, an electric hob, 2 or 3 drawers, a door, etc... Family is in Dutch language. Entourage (fridge, bin, lighting, wall, windows, etc.) not included! Picture shown is an EXEMPLE rendering i made with this family. Not a perfect family, but hopefully useble :-)

Product Version: Unknown

62748 Downloads

This is a fully parametric garage door with panels.  The top row is glass with an option to have the grids in the glass.  There is also an option for panels across the top row.  

Product Version: Unknown

8275 Downloads

This is the box model.  The box is modeled as parametric, and most of the types are already created.  You can see how these pieces stack together at http://stackedconfigurator.muuto.com/

I also modeled a front door on the boxes that you can turn on/off but it's not available to spec from MUUTO.

Please also download the model of the stand from my uploads if you'd like to use that as part of your configuration.

Product Version: Revit Architecture 2016

414 Downloads

Sidelights to accompany the Jeld-Wen 1381 Flat Top Entry Door

No Rating

Product Version: Revit Architecture 2015

901 Downloads

AGRV_Door_HiddenEscape_隱藏式逃生門

with parameters for open/close door in 3D view

Metric Hidden Escape door with DIM & Material parameters and dimension Guide 

Visit our website AgileRevit.com for more families

No Rating

Product Version: Revit Architecture 2018

481 Downloads

AGRV_Door_OverheadRolling_捲簾門

with parameters for open/close door in 3D view

Metric Overhead Rolling door with DIM & Material parameters and dimension Guide 

Visit our website AgileRevit.com for more families

No Rating

Product Version: Revit Architecture 2018

2045 Downloads

PORTÃO DE GARAGEM TIPO BASCULANTE COM MATERIAIS PARAMETRIZADOS

Product Version: Revit Architecture 2014

19618 Downloads

Roll Up Shutter with Counter.  Insert as a "Door".  It is completely Parametric - width, height, shutter closing distance and countertop width. The materials  Shutter & Shutter Box can alao be modified to suit your project.

No Rating

Product Version: Unknown

5318 Downloads

MIFAB® BIG-O Series HDPE rotational molded oil interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), internal air relief by-pass, adjustable oil draw-off assembly (1 1/2″) on each side, double vent connections (3″) on each side, sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20

No Rating

Product Version: Revit Architecture 2020

241 Downloads

MIFAB® LIL-O Series HDPE injection molded oil. Unit shall include: sediment bucket (1/4″ diameter holes) with perforated baffle (3/8″ x 1 1/4″ slots) near inlet, deep seal trap covered by lid, sewer gas stopper, securing latches, stainless steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and HDPE injection molded, non skid, rectangular gasketed lid(s).

No Rating

Product Version: Unknown

72 Downloads

Floor-based generic model of an enclosed shower. Width, Depth, and Height are all adjustable Instance Parameters. Materials for shower door, glass, pan, lip, drain, and surround are all adjustable type paramteres. Flip controls are also included. Shower head and Valve control height are adjustable within the family. 

Modeled in Revit 2017, not 2016 as stated. 

Product Version: Revit Architecture 2016

107464 Downloads

A parametric base casework cabinet. The family contains a level of detailing when cut in section. The family also comes with a catalog in the form of a .txt file that needs to be in the same directory in order for the catalog to work. The following parametric values are available: Height, Width, Length, Material, Door Styles, Hardware Styles

Product Version: Unknown

3842 Downloads

A parametric base casework cabinet. The family contains a level of detailing when cut in section. The family also comes with a catalog in the form of a .txt file that needs to be in the same directory in order for the catalog to work. The following parametric values are available: Height, Width, Length, Material, Door Styles, Hardware Styles, Shelf Style

No Rating

Product Version: Unknown

4640 Downloads

Fully Parametric Office Container Family. Can open any Door Angle for 2D & 3D. Base Concrete can add and remove by one click. Container Roof Can be On/Off.

If you need any Revit Family, please contact us on the following FB Page Messenger Link ( https://business.facebook.com/tbrotherengineeringtraining/?business_id=202883793686604&ref=bookmarks ) with detail specification about family you need. Thanks.

Product Version: Revit Architecture 2018

12009 Downloads

Low polygon entourage family of double-decker bus commonly found in Hong Kong.

The naming of the family is based on the "FLIP Master Type List"

http://aiab.org/images/pdf/FLIP_Master_Type_List_V1.6.7.xls

Other documentation of the FLIP (Family Library Interchange Program)

http://aiab.org/index.php/flip-guideline

For further information, please visit Autodesk Industy Advisory Board (Hong Kong)

http://aiab.org/index.php/files

No Rating

Product Version: Revit Architecture 2014

777 Downloads

Itt van fent az eredetije, az csak fix 1200. Kicsit feltuningoltam.

Pld nyitható a kabin ajtaja :-D

Adjustable size of the tray and opened the cabin door.

Product Version: Revit MEP 2010

11122 Downloads

Contains 10, 20 & 40 Foot variations with High Cude variations as well.

Originally Modelled by "SMARTBIM, LLC" according to the owner tag in the model, I have taken this and tweaked to my liking by:

Extra Param for door Vis.Visibility settings of components with additional Course View and plan view settings to help create clearer graphics. Metric Units. Rationalise Material naming & asset 

Product Version: Revit Architecture 2014

18645 Downloads

A parametric base casework cabinet. The family contains a level of detailing when cut in section. The family also comes with a catalog in the form of a .txt file that needs to be in the same directory in order for the catalog to work. The following parametric values are available: Height, Width, Length, Material, Door Styles, Drawer Styles, Hardware Styles, Shelf Style

No Rating

Product Version: Unknown

3034 Downloads

Nested SL ventilator below Louvre & Exhaust space having 1 frames & 1 leaf panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator simply set Low Lite  Ht to zero.    Swing of Vent leaf is operable by setting 3D swing angle. Louvre params can also be operable. Exhaust inset can be change.Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

511 Downloads

This is a highly parametric line based family. The family has minimum length restriction when drawing the line. Please provide feedback or comments. I plan to add more style types to it.

The family contains a level of detailing when cut in section. The following parametric values are available: Height, Width, Length, Material, Door Styles, Drawer Styles, Hardware Styles, Shelf Style

Product Version: Unknown

8378 Downloads

Insert as a DOOR!!

This is an expasion joint from wall to wall, mostly to be used with gypsum board walls.

The gap is 8". The plan represensation will show the joint gasket details. The elevation will show the trim and middle metal, as well as the 2 side expansion gadgets.

Both metal and expansion gadgets allow material selection.

This joint system is similar to InPro 233-A07 wall to wall expansion joint

Product Version: Revit Architecture 2015

1775 Downloads

With a glass-door cabinet you can show off as well as protect your glassware or your favourite collection.

Included Light and Dark timber finishes

No Rating

Product Version: Revit Architecture 2014

1737 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 18 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 18 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 18 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/18-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

550 Downloads

This is the finished Facility Occupancy Load Schedule and Egress Plan. This is automated to calculate the occupant load based on the type of area then use that to calculate occupant load.

There are 2 tags. 1 for rooms, 1 for egress doors.

There are 4 schedules

1.      DOOR EGRESS SCHEDULE

2.      FACILITY OCCUPANCY SCHEDULE

3.      ROOM OCCUPANCY COMPARE SCHEDULE

4.      SPACE OCCUPANCY CLASSIFICATION

There is one sample Model.

Steps:

1.      Copy the schedules and tags to your current project.

2.      Open the Room occupancy compare schedule

3.      Select what type of area you see fit.

4.      Type in 0 sf for “NON CALCULATED ROOM AREA” to calculate occupants

5.      Manually type in tag value to match calculation to populate the room tag.

6.      Place the facility schedule on the code plan sheet.

7.      Place the Door egress schedule on the sheet too.

8.      Place all your room tags

9.      Place your egress door tags on 1 exit way door only per egress area

10.   Make a note of how you want to number your egress areas. ( I usually go clockwise from upper left to lower right)

11.   Fill in the Egress area for each room in the properties field. ( You can multiple select rooms at the same time and type in the value for all at once, use your filter)

12.   The Facility Schedule will populate.

13.   Type in the Occupant value to the Door egress schedule. Make sure they match. Hide Door egress schedule.

You’re done. Or pretty close J #JustinDesigns3D JustinDesigns3D@Gmail.com

Product Version: Unknown

4016 Downloads

MIFAB® Series MC-27 water closet carrier with lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste and anti-crossover baffles for floor mounted back outlet water closets. Complete with adjustable 8”ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and side anchor tie down supports.

No Rating

Product Version: Unknown

42 Downloads

No Rating

Product Version: Revit Architecture 2012

9668 Downloads

this is a face based family (Rafter Anchor). Use the vertical face to place it (i.e. the vertical side of the double top plates) and then just align (AL) with the rafter.

If you benefit from it please subscribe to my channel https://www.youtube.com/channel/UCJZt58oErg137aaKJpfygRw

Paypal donations: omul-andrei@protonmail.com

Bitcoin dontations: bc1q9qgjlt7x2yt6uvv869qjyd4nsuz8nhxkg3ck73

Etherium dontations: 0x2B5B713491c2D83889d546C31C115548c642d070

No Rating

Product Version: Unknown

524 Downloads

Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb.

Parameters include options for 5 finishes and 15 glass options.

Manufactured by Holtkötter.

Product Version: Revit Architecture 2011

6626 Downloads

This casework family is a model of an American Woodmark base cabinet with two doors, two drawers, and an adjustable half-depth shelf.  Each door and drawer can be opened individually.  The shelf moves up and down and is held in place with clips.  The materials are pre-defined and assigned through casework sub-categories.  The family includes the URL to open the American Woodmark catalog wherein this cabinet, with its four standard widths, can be found.

No Rating

Product Version: Revit Architecture 2012

7201 Downloads

1 connected swing-out door with ONE rotating circular shelf

Image is from http://trendkitchencabinets.com/wp-content/uploads/2012/11/Menards-Kitchen-Cabinets-Unfinished-1.jpg 

Product Version: Revit Architecture 2013

20475 Downloads